Information

  • Masonry QC Inspection

  • Conducted on

  • Prepared by

  • Stainless steel reinforcement with pintels at exterior walls.

  • Hot dipped (galvanized) joint reinforcement at interior walls.

  • T- and corner reinforcement where there are intersections.

  • Two courses of Durawall above and below all openings.

  • Verify rebar locations and sizes.

  • Verify embed plate locations and elevations.

  • Open face shells at T-intersections.

  • Horizontal bond beam grout stops.

  • Verify correct mortar and grout.

  • Verify mortar consistency.

  • Verify grout consistency.

  • Consolidation of grout when placing.

  • Mortar joints are consistent and aligned.

  • Verify alignment of soldier course joints.

  • Verify elevations of walls and openings.

  • MEP openings and penetrations are in place.

  • Maintain 3/8" around door jambs.

  • Doors are plumb, level and square.

  • Windows are plumb and level.

  • Bolts installed for guard rails

  • Enter name of Inspector

  • Enter name of secondary inspector

  • Enter name of masonry foreman. This is to acknowledge that the above statements are true and if any discrepancies exist, corrections will be made as soon as possible.

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.