Information
-
Company Name
-
Audit Title
-
Conducted on
-
Prepared by
-
Class Tested
Observed test
-
Nominated Tester's Name
6.1 LIGHTING
-
a. Rear and Pilot (if fitted)
-
b. Headlamp
-
c. Stop Lamp
-
d. Rear Reflector
-
e. Indicators
-
f. Headlamp Aim
-
g. Horn
-
h. Horn with each light operation
-
i. Door operation
6.2 STEERING and SUSPENSION
-
a. Steering Controls - bars, grips, fouling, cable, stops
-
b. Steering System - headraces, notchy, freeplay
-
c. Front suspension - springs, mudguards, forks, stiffness
-
d. Wheel bearings - spindle lock pins
-
Front
-
Rear
-
e. Rear Suspensions - play, stiffness, fouling
-
f. Shock Absorbers - fork seals
-
Front
-
Rear
-
g. Wheel Alignment
-
h. Fuel cap condition
6.3 BRAKES
-
a. Control Front - lever, trap, creep
-
b. Front Brake - cable, hoses, drum, disc
-
c. Control Rear - pedal, travel, creep
-
d. Rear Brake - cable, hoses, drum, disc
-
e. Brake Pad Thickness
-
f. Front Brake Efficiency
-
g. Rear Brake Efficiency
6.4 TYRES & WHEELS
-
a. Tyre Type
-
b. Tyre Condition & Depth
-
c. Wheels - spokes, security
-
d. Check operation of handbrake
-
e. Check fuel pipes with engine running and without
-
f. Examine front wheels, tyres, brakes, steering & suspension components
-
g. Examine rear wheels, tyres, brakes, steering & suspension components
-
h. Wheel bearings
6.5 SIDECAR (IF FITTED)
-
a. Security
-
b. Suspension & wheel bearings
-
c. Wheel alignment
-
d. Visual assessment
6.6 GENERAL
-
a. Structure - corrosion, joints, modifications
-
b. Transmission - chain/sprocket, guards
-
c. Controls - throttle lever, clutch lever and linkage
-
d. Seat & footrests
-
e. Number plate
-
f. VIN plate
-
g. Exhaust system
-
h. Fuel system - cap
7. Use of VTS Device
-
a. Does the NT demonstrate adequate competence in the use of the VTS device?
-
b. Was the information logged on to the VTS device consistent with the vehicle's actual condition?
8. Further actions required for NT and AE ( if advice given or shortcomings noted)
-
Was the procedural outcome of the test discussed with the NT
-
Was a recommendation made for the NT to revise items in Inspection Manual and for recheck to be made during internal NT checks
