MU W807 Weekly Water Treatment Facility Checklist

Week of:

1) Grease aeration fan

2) Switch backwash blowers

3) Switch KMnO4 pumps

4) Flush KNnO4 pump and line

5) Check temperature

Influent

Effluent

6) Influent and effluent-ph, iron, and manganese tests, Tuesday and Friday.

7) Check backwash blower.

8) Check aeration fan intake screen.

9) Backwash equipment: check that all equipment works properly.

a. Blowers

b. Air Compressor

c. Air Dryer

d. Backwash pump

10) Check electric motor oil level.

a. Dual Head Air Compressor

b. Low Zone #1

c. Low Zone #2

d. Low Zone #3

e. Dual Zone #1

f. High Zone #1

g. High Zone #2

11) Exercise Dual Zone Pump.

12) Sludge both backwash tanks on Wednesday. Take sample to Wastewater Treatment Facility.

13) "Plumbed eyelashes and showers should be flushed weekly to ensure proper operation. Eyewash flushing for at least three minutes to reduce bacterial and amoebic contamination. Acanthamoebae are commonly found in eyewashes and can cause severe eye infections when introduced into traumatized eyes. Units must also be inspected on an annual basis to assure conformance with ANSI Z385.1."

a. Fluoride Room

b. Caustic Room

c. KMnO4 Room

d. Chlorine Room

e. Fluoride Room at Wildwood Booster

14) Check dual head air compressor for water in tank. Drain if needed.

15) Check water separator on air line above air compressor. Drain if needed.

16) Check all WTF doors to see if they are locked properly.