Title Page

  • Conducted on

  • Prepared by

  • Mill Location

  • Manlift ID #

  • The following items shall be checked. Other items may apply. Select whether the item being checked is ACCEPTABLE or DEFECTIVE. Any item marked as DEFECTIVE shall be reported to your supervisor IMMEDIATELY. DO NOT RUN MANLIFT WITHOUT MANAGEMENT APPROVAL.

FLUID LEVELS:

  • Engine Oil

  • Fuel

  • Hydraulic Oil

TEST RUN UNIT, OBSERVE OPERATION FOR MALFUNCTIONS:

  • Ground Controls

  • Inspect Power Track for Damage

  • Tire - Cuts, Pressure, Visible Damage Hydraulic Leaks

  • Hydraulic Leaks

  • Visual Damage

  • Emergency Electrical Pump

  • Emergency Shut Off Button

  • Operated Boom Up / Down as Well as In / Out

WORK PLATFORM

  • Inspect Platform for Damage - Railing, Floor, Gates, Etc.

  • Emergency Electrical Pump

  • Emergency Shut Off Button

  • Test All Platform Controls

  • Siren / Horn

  • Inspect and Clean Radiator Cooling Fins and Fan Shrouds (Air or Water)

OPERATOR INFORMATION:

  • Operator Name:

  • Any oil leaks are to be reported to a supervisor immediately. ALL INSPECTIONS MUST BE TURNED IN TO THE SAFETY DEPARTMENT.

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.