Information
-
Document No.
-
Audit Title
-
Client / Site
-
Conducted on
-
Prepared by
-
Location
-
Personnel
PART145.A.25 Facilities
Part145.A.25(a)
-
Adhoc
-
Part145.A.25(b)
-
AMC145.A.25(b)
It is acceptable to combine any or all of the office accommodation requirements into one office subject to the staff having sufficient room to carry out the assigned tasks.
In addition, as part of the office accommodation, aircraft maintenance staff should be provided with an area where they may study maintenance instructions and complete maintenance records in a proper manner. -
145.A.25 (b)<br>The organisation shall ensure that:(b) Office accommodation is provided for the management of the planned work referred to in paragraph (a), and certifying staff so that they can carry out their designated tasks in a manner that contributes to good aircraft maintenance standards.
Adhoc
-
Part145.A.25(c)
-
Part145.A.25 (c)<br>1. Is the working environment including aircraft hangars, component w.shops & office accommodation appropriate for the task carried out and in particular special requirements observed?
-
Part145.A.25 (c)<br>2. Is the working environment such that the effectiveness of personnel is not impaired?
-
Part145.A.25 (c)<br>3. Are temperatures maintained such that personnel can carry out tasks with undue discomfort?
-
Part145.A.25 (c)<br>4. Is dust or any other airborne contamination kept to a minimum such that aircraft / component surface contamination is not evident?
-
Part145.A.25 (c)<br>5. Is lighting such that inspections and maintenance tasks can be carried out in an effective manner?
-
Part145.A.25 (c)<br>6. Are noise levels kept to a minimum in order to prevent distractions to other personnel carrying out inspection tasks?
Adhoc
-
Part145.A.25(d)
-
A.M.C Part145.A.25(d)
1. Storage facilities for serviceable aircraft components should be clean, well-ventilated and maintained at a constant dry temperature to minimise the effects of condensation. Manufacturer’s storage recommendations should be followed for those aircraft components identified in such published recommendations.
2. Storage racks should be strong enough to hold aircraft components and provide sufficient support for large aircraft components such that the component is not distorted during storage.
3. All aircraft components, wherever practicable, should remain packaged in protective material to minimise damage and corrosion during storage. -
Part145.A.25 (d)<br>1.Do the storage conditions ensure the segregation of serviceable components and material from unserviceable aircraft components, material, equipment and tools?
-
Part145.A.25 (d)<br>2. Are the conditions of storage i.a.w with the manufacturer's instructions in order to prevent deterioration and damage of stored items?
-
Part145.A.25 (d)<br>3. Are secure storage facilities provided for components, equipment, tools and material?
-
Part145.A.25 (d)<br>4. Is access to storage facilities restricted to authorised personnel?
Adhoc
-
Procedures
-
Procedures included in audit
Facilities
-
Facilities covered in audit