Title Page
General Information
-
Conducted on :
-
Freshdesk Ticket Number :
-
Area Network Owner (KZN) :
POP Name :
-
Upload Location
Brigit Fire Suppression System Checklist:
-
Upon entering the POP, is the Control Panel set on Auto/Manual?
-
Upload a picture of the Control Panel
-
Before proceeding with the inspection set the control panel to Manual
-
Are all faults cleared on the Control Panel
-
Upload a picture of the pressure gauge
Generator Dry Run
-
Upload picture of the running hours- Before
-
Did the generator operate for 30mins?
-
Is the oil level fine?
-
Is the fuel level fine?
-
Upload picture of the running hours- After
Internal Housekeeping
-
Corrective PPE?
-
Have we dusted and vacuumed the POP?
-
Did we clean the equipment?
-
Did we dust and clean light fixtures?
-
Is the POP/ surrounding area, dampness-free ?
-
Did we clean windows and glass surfaces?
-
Did we remove all waste inside the POP/surrounding the POP?
Jablotron Inspection Checklist:
-
Confirm all external and internal Jablotron peripherals are not vandalized or tampered with and are intact
-
Is the ONT UP and the account active?
-
Are all Live feeds and streaming active?
-
Test the alarm system (Including peripherals)
-
Confirm the internal battery levels are good
-
Test the communication channels and application
-
Inspect wiring, connection and fixed peripherals
-
All camera lenses are cleaned
-
Confirmation of receiving notifications
-
PG outputs/sensor on the devices in sync
Aircon Checklist
-
Confirm all external and internal Aircon peripherals are not vandalized or tampered with and are intact
-
Inspect wiring, connection and fixed peripherals
-
Crosscheck the temperature with Jablotron and PRTG
-
Inspect the fan blades move freely
-
Test the complete system
-
Confirm the Aircon is set to the correct temperature
Orion Delta Rectifier
-
Does the rectifier have any active alarms?
-
Upload image of the Display with information
-
Is the information in sync to PRTG?
Exiting the POP
-
Upon Exiting the POP, is the Fire Suppression System Control Panel set on Auto/Manual?
-
Upload a picture of the Fire Suppression System Control Panel
-
Are the magnetic locks functional?
-
Confirm the transitioning of the state on the Keypad (Red/Green)
Submission of the report
-
Before finalizing the submission, it is imperative to verify that all information contained in the report is both valid and accurate. Failing to do so could result in adverse consequences for Zoom Fibre.
