Title Page
-
Pressbrake#
-
Conducted on
-
Serviced By
Service
-
Test and Inspect Safety Curtain
-
Inspect Foot pedal Wires and Operation
-
Blow out Cabinet Condenser
-
Change Cabinet Filter Mats (if applicable)
-
Check Oil Levels
-
Visually Check for Leaks
-
Inspect or Blow out Hyd. Fluid Condensor
-
Clean and Lubricate Ram (Y-axle)
-
Clean and Lubricate Rear Backgauges
-
Grease Gear Rack for Z Axis
-
Inspect Backgauges and Mounts
-
Inspect Toothed Belts on all Axis
-
Next service
-
Engineer. I have functionally checked all the equipment before leaving site and I have left everything safe. I have also made the client aware of any defects that may be present ( if any defects are present please state the equipment that is not safe to operate giving reasons in the report)
-
Customer. I am satisfied with the work that has been completed by the engineer
Annual Service
-
Inspect Lower and Upper Beam Guide
-
Change Hyd. Fluid Filter
-
Clean or Replace Hyd. Fluid Tank Breather
-
Inspect Stops/Bumpers for Backgauges
