Title Page
-
Site conducted
-
Conducted on
-
Prepared by
-
Location
-
Project Lead
-
Inspection completed with
-
Each section will be scored as:
Compliant
Minor non-compliance
Major non-compliance
The author believes that the information contained within this report to be correct at the time of printing.
1. Information & Signage
1. Information & Signage
-
1.1 Site H&S information Board Completed on display
-
1.2 CCS Signage
-
1.3 Clear information signage throughout site
-
1.4 Neighbourhood communication
-
Add photos to section
-
General Observations
-
Score for section
2. Induction / Training
2. Induction / Training
-
2.1 Induction materials available & Records maintained
-
2.2 CSCS cards & Compliance checks
-
2.3 Occupational health questionnaires
-
2.4 Weekly tbt's
-
Add photos to section
-
General Observations (What was seen during inspection)
-
Score for section
3. CDM Documentation
CDM Documentation
-
3.1 Pre-construction information
-
3.2 CPP up to date
-
3.3 Co-ordination & Safety meetings
-
3.4 Coordinator roles correctly allocated and accepted 0
-
Add photos to section
-
General Observations (What was seen during inspection)
-
Score for section
4. Environmental System
4. Environmental System
-
4.1 Project environmental management plan
-
4.2 Spill kits suitable for site works and available <br>
-
4.3 Waste carriers and Waste Management Licenses
-
4.4 Skips and bins in place and secure
-
Add photos to section
-
General Observations (What was seen during inspection)
-
Score for section
5. PPE
5. PPE
-
5.1 Compliance with 5 point policy
-
5.2 Additional PPE arrangements
-
5.3 Visitor PPE available
-
5.4 Mandatory PPE and Safe Route signage in place
-
Add photos to section
-
General Observations (What was seen during inspection)
-
Score for section
6. Housekeeping
6. Housekeeping
-
6.1 Office / Meeting Rooms
-
6.2 Obstructions / hazards
-
6.3 Site Cleanliness
-
6.4 Storage of materials
-
Add photos to section
-
General Observations (What was seen during inspection)
-
Score for section
7. Welfare
7. Welfare
-
7.1 Means of heating food/ refrigerator / kitchen / breakout facilities
-
7.2 Suitable Seating arrangements. (Chairs with backs)
-
7.3 Drying room and Provision of secure lockers
-
7.4 Toilet facilities
-
7.5 Drinking water available
-
Add photos to section
-
General Observations (What was seen during inspection)
-
Score for section
8. Hazard Management
8. Hazard Management
-
8.1 RED RAMS in place and suitable
-
8.2 Suitable Subcontractors RAMS in place
-
8.3 RAMS Review form used- and signed by competent person.
-
8.4 Suitability of Noise, HAVS & Manual Handling assessments and status of compliance.
-
8.5 Permit to work systems implemented and managed correctly.
-
8.6 Lifting Plans in place for all lifting operations
-
Add photos to section
-
General Observations (What was seen during inspection)
-
Score for section
9. Environmental control
9. Environmental Control
-
9.1 Suitable COSHH assessments and status of compliance
-
9.2 WTN / Consignment notes<br>
-
9.3 Sustainability scheme compliance (e.g. BREEAM/SKA)
-
9.4 Asbestos (R&D) Survey in place
-
9.5 Asbestos Training
-
9.6 Asbestos - safe movement of waste
-
Add photos to section
-
General Observations (What was seen during inspection)
-
Score for section
10. Work at Height
10. Work at Height
-
10.1 Edge protection in place
-
10.2 Working safely
-
10.3 Scaffolding (condition)
-
10.4 Towers / MEWPS
-
10.5 PECO / Podium
-
10.6 Ladders / Steps
-
10.7 Safe lifting practices
-
Add photos to section
-
General Observations (What was seen during inspection)
-
Score for section
11. Electrical
11. Electrical & Temporary Works
-
11.1 Certs available for all temporary electric systems
-
11.2 110v in use
-
11.3 Fit for purpose (i.e. no hanging transformers or cable reels)
-
11.4 Equipment and cables in good condition
-
11.5 Temporary Works Register/Drawings & Calcs
-
11.6 Temporary works checks being correctly completed
-
Add photos to section
-
General Observations (What was seen during inspection)
-
Score for section
12. Plant & Work Equipment
12. Plant & Work Equipment
-
12.1 Tool chests gas struts operational
-
12.2 Guards in place and equipment in good condition
-
12.3 Maintenance/Inspections (i.e. PUWER register)
-
12.4 Trained / competent user
-
12.5 Manual handling aid in use
-
12.6 Lifting equipment and appliances in good condition
-
Add photos to section
-
General Observations (What was seen during inspection)
-
Score for section
13. Fire & First Aid
Fire & First Aid
-
13.1 Fire risk assessment
-
13.2 Fire Plan & Emergency procedures
-
13.3 Fire drill
-
13.4 Fire point inspections (Weekly fire form check)
-
13.5 First aid assessment and equipment in place
-
13.6 Fire & First Aid Signage
-
Add photos to section
-
General Observations (What was seen during inspection)
-
Score for section
14. Access & Egress
14. Access & Egress
-
14.1 Site entrance secure
-
14.2 Hoarding in good condition
-
14.3 Pedestrian routes
-
14.4 Vehicle routes
-
14.5 Sign in / out process in place
-
Add photos to section
-
General Observations (What was seen during inspection)
-
Score for section
Additional Questions
-
Is all paperwork well organised and easily accessible
-
Is weekly inspection complete
-
Are all tools correctly PAT Tested?
-
Is there excess dust around cutting areas?
-
Is adequate dust extraction for tools in place?
-
-
Health and Safety Innovation / Best Practise
-
Health and Safety Innovation / Best Practise
Automatic Failure Criteria
-
Two major non-conformances in this inspection
-
Four or more major or minor non-conformances in this inspection
-
Major non-conformance repeated in two consecutive inspections
-
Work required to be completely stopped due to safety concern
Signatures
-
Signed by Health & Safety Manager
