Title Page

  • Location
  • Conducted on

  • Prepared by

Level I Verification

  • Visual Inspection of Unit for Fit and Finish of Installation

  • Take Photos from multiple angels on both load and unload side

  • Is there damage to the unit? If Yes, provide pictures of damage

  • Assign responsible person to follow up and repair/replace damaged components

Level II Verification

  • Unit(s) Placed per drawings

  • Unit(s) Leveled

  • Seismic Anchoring executed as required

Utilities

  • Verify Cold water connected and routed Properly

  • Verify DI Water connected and routed properly

  • Verify electrical connection is correct and power cord is routed properly

  • Verify drains are plumbed and properly positioned to ensure water does not splash out of the floor sink

  • Verify Steam Connection and Condensate

  • Ensure Chemical Lines are installed (3 Lines)

Level III Verification

  • While Unit(s) is in operation, verify no leaks

  • Test Steam Bypass Function

Inspection Sign Off

  • Add any general inspection comments

  • Signature (provide First Name, Last Name, Position

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.