Table Bender PM

• Site conducted

  Select

• Conducted on

  Date

• Prepared by

#14 Table Bender

1. For efficiency, have all tools/materials known to be needed for the scheduled maintenance ready prior to starting 2. Communicate with supervisors/operators of the scheduled maintenance to be performed. Briefly discuss how the equipment is running and if there are any problems that they know of that need to be addressed. Inform them of the pending LOTOTO of the machine 3. Do a walk around, checking the general condition for any obvious damage/deficiencies. 4. Perform systems check; making sure safety devices, bin arms, rollers, etc. are functioning properly. 5. Perform LOTOTO procedures. Procedures should be in the document box located on the machine. Perform “Group LOTOTO” procedures if more than one person is working on the machine. 6. Perform all scheduled maintenance 7. If replacement parts are necessary, look for them in inventory first. Parts that need to be ordered, must be cleared through the proper supervisor’s/managers. 8. Take all necessary precautions if LOTO locks are to be removed for testing purposes. Replace them after the test run has been performed 9. Replace all guards upon completing the service 10. Inform all necessary personnel of the intent to remove the LOTO locks prior to removing them. 11. Do final systems check 12. Inform all pertinent parties, that the machine is ready to go back into production and/or and problems that would affect the safe operation of the equipment (i.e., parts that need to be ordered)

WEEKLY

• Perform a systems check of safety devices and machine functions

  Yes

  No

  N/A

• Perform LOTOTO

  Yes

  No

  N/A

• Remove millscale from the machine

  Yes

  No

  N/A

• Grease both main bearings top and bottom.

  Yes

  No

  N/A

• Check chain tension and lube with chain lube or open pinion grease spray

  Yes

  No

  N/A

• Listen for unusual noise & sounds from motor and gearbox

  Yes

  No

  N/A

• Check gearbox for visible leaks

  Yes

  No

  N/A

• Bushings are not cracked or broken

  Yes

  No

  N/A

• Check for frayed wires, especially on foot pedals

  Yes

  No

  N/A

• Check Pins and bend tools condition

  Yes

  No

  N/A

• Condition of pretable: rollers, rails, etc

  Yes

  No

  N/A

• Perform a systems check of safety devices and machine functions

  Yes

  No

  N/A

• Replace all guards and safety devices. Collect all tools from the area

  Yes

  No

  N/A

• Inform personnel around the area that LOTO Locks are being removed

  Yes

  No

  N/A

• Add signature

  Sign

• Select date

  Date

Parts Ordered/Notes or Comments

• Parts Ordered

  Yes

  No

  N/A

• Notes/Comments

• Yes

  No

  N/A

• Is this a Monthly Inspection?

  Yes

  No

  N/A

• Check the Motor Brake. Adjust if needed. See the Motor Brake Information portion of the manual if you are not sure how to do this

  Yes

  No

  N/A

• Check condition of the no touch table and base (magnet).

  Yes

  No

  N/A

• Add signature

  Sign

• Select date

  Date