审计

Factory

Item no

Product size(cm)

Product nw(kgs)

Main tube thickness(mm)

test date

tester

Result

Test standerd :en581-1:2006 , en581-2:2015 ,en1022:2005 (for table)

Test level :domestic

Tests conducted:

1. safety requirements (Edges and corners&holes and gaps 7-12mm&Shear and squeeze points12-18mm)

2. Vertical static load test on the table top (75kgs,30min-----if table top length L ≤ 1 600 mm ,just one force point /table top length L > 1 600 mm, at 2 points positioned on the longitudinal axis of the table top with 400 mm on either side of the transversal axis (see Figu

3. Vertical static load test on end extensions (20kgs,30min,force point 10cm from edge)

4. Stability under vertical loada,force point 5cm from edge which is most likely to cause overturning (For L smaller than 800 mm F = 200 N For L between 800 mm and 1600 mm F = L/4 N For L larger than 1 600 mm F = 400 N )

5. Stability of tables which are intended to support a parasol (horizontal force F of 3kgs at a height h of 2 200 mm)

Remark:
a For tables that might not fulfil the stability requirements before carrying out any tests, the applicable stability tests may be carried out before starting the sequence of tests specified in this Table.

Add media
Please note that this checklist is a hypothetical example and provides basic information only. It is not intended to take the place of, among other things, workplace, health and safety advice; medical advice, diagnosis, or treatment; or other applicable laws. You should also seek your own professional advice to determine if the use of such checklist is permissible in your workplace or jurisdiction.