TT Commissioning Audit Rev 1.5.3

• Customers Name:

• Client / Site:

• Commissioners name:

  Select David Richings Neil Harrison Anthony Hession Other

  • David Richings
  • Neil Harrison
  • Anthony Hession
  • Other

• Name of commissioner:

• Conducted on

  Date
• Location
  Address

Transtank Commissioning Document CR1/1.0 iPhone version

1.0 - Customer Information

• Sales Order Number/s:

• Tank type and serial numbers:

• Location/Mine name:

2.0 - Preliminaries

• This applies to all tanks being commissioned, only complete when all tanks have been checked:

• 2.1 - Tank/s, DGM/s, Skid/s etc in good condition?<br>Check over condition and note any damage caused during transportation and unloading.

  Yes

  N/A

• 2.1.1 - Are tanks level and on a correctly prepared base/site?

  Yes

  No

  N/A

• 2.2 - Are doors, ladders, stairs, bridge ways, protective rails and awnings installed correctly and operational? Check all bolts are tighten correctly.

  Complete

  Not yet completed

  N/A

• 2.3 - Correct dip stick for the tank size, check SFL, does it match the SFL decal and ID plate.

  Yes

  No

  N/A

• 2.4 - Does tank contain a interstitial dip?

  Yes

  No

  N/A

• 2.5 - Check all caps/plugs on the roof are thread taped, tight and labeled correctly?

  Complete

  Not yet completed

  N/A

• 2.6 - Interstitial vent (TIV) is present and all bolts are secured. Bolts for caps must allow for vent to move but the bolts must have at two threads threw the nut. Bolts must contain springs.

  Complete

  Not yet completed

  N/A

• 2.7 - Manway/s contain gasket and all nuts are secured correctly?

  Complete

  Not yet completed

  N/A

• 2.8 - Check for loose bolts, studs, fittings, hoses etc. Ensure all studs, bolts etc are marked with paint pen, this is a must!

  Complete

  Not yet completed

  N/A

• 2.9 - Correct vent pipe supplied. Fit and ensure vent cap is secured and is not obstructed.

  Complete

  Not yet completed

  N/A

• 2.10 - Scamp fitted, tested and set correctly (Internal measurement - 150mm for T & P series, 80 mm for T10's)

  Complete

  Not yet completed

  N/A

• 2.11 - Hose mast/s installed correctly eg swivel, hose bun, S/S wire clamps, check operation of retractor, ensure action is free of any obstructions.

  Complete

  Not yet completed

  N/A

• 2.12 - Check condition of hoses, ensure they are not damaged and are correct type, length and diameter.

  Complete

  Not yet completed

  N/A

• 2.13 - Check conditions of nozzle/s, trigger and swivel operation. Ensure all joints are tight and sealed using correct sealant.

  Complete

  Not yet completed

  N/A

• 2.14 - Check pump motor and gearbox oil and water level's. Top up if needed before operating.

  Complete

  Not yet completed

  N/A

• 2.15 - Check operation of ball valves, globe valves and direction of duo check valves before delivery of product.

  Complete

  Not yet completed

  N/A

• 2.16 - Check all filter and strainers lids are tight and contain seals/gaskets.

  Complete

  Not yet completed

  N/A

3.0 - Pipework

• Please ensure all flanges are tightened to the correct torque valves.

  

• All flanges have been tightened to correct torque settings?

  Complete

  Not yet completed

  N/A

• 3.1 - All external pipe work connections completed, check all joints to ensure studs are tight and contain a gasket.

  Complete

  Not yet completed

  N/A

• 3.2 - All ball valves operational, duo check valves are in the correct way?

  Complete

  Not yet completed

  N/A

• 3.3 - Are all ball valves on drain points closed and have a plug fitted?

  Complete

  Not yet completed

  N/A

• 3.4 - Check all linking pipe work is correctly supported and flex pipe is not distorted beyond manufactures recommendations?

  Complete

  Not yet completed

  N/A

4.0 - Electrical

• 4.1 - Transtank to arrange electrical connection to power supply?

  Yes

  No

  N/A

• 4.1.1 - Electrical connection completed?

  Complete

  Not yet completed

  N/A

• 4.2 - Customer to arrange electrical connection to power supply?

  Yes

  No

  N/A

• 4.2.1 - Electrical connection completed?

  Complete

  Not yet completed

  N/A

• 4.2.2 - Electrician or Company name

• 4.2.3 - Licence Number if available.

• 4.3 - Check operation of all switches.

  Complete

  Not yet completed

  N/A

• 4.4 - All electrical conduit secured, neat and sealed from the weather?

  Complete

  Not yet completed

  N/A

• 4.5 - E stop/s operate correctly?

  Complete

  Not yet completed

  N/A

• 4.6 - Overloads set to correct amps?

  Complete

  Not yet completed

  N/A

• 4.7 - Light/s fitted and working correctly?

  Complete

  Not yet completed

  N/A

• 4.8 - Earth stake fitted (if applicable)

  Complete

  Not yet completed

  N/A

5.0 - Fuel/Lubricant delivery/tank fill

• This applies to all tanks being commissioned, please apply the below procedure to all tanks.

• 5.1 - Tank fill/delivery isolation valve to be in the closed position

  Complete

  Not yet completed

  N/A

• 5.2 - Check tank dip, record contents of tank, work out amount of product to deliver to reach SFL.

  Complete

  Not yet completed

  N/A

• 5.3 - Connect delivery hose, before starting pump, gravity fill hose, check for leaks.

  Complete

  Not yet completed

  N/A

• 5.4 - Commence delivery of the required amount of product, once delivery is complete, turn off all ball valves, remove hose and replace cam lock cover.

  Complete

  Not yet completed

  N/A

6.0 - Flow tests

• Please record all flow tests completed, record flow rates per minute and pressures both positive and negative.

6.1 - Flow Test - Light Vehicle No 1

• Product type:

  Diesel

  Unleaded

  Other

• Type of product:

• Pump/Bowser/Dispenser:

  Select Yes N/A

  • Yes
  • N/A

• Type of Pump/Bowser/Dispenser:

  Select Ebsray Regent Blackmer Redjacket FE Petro Compac Transponder Gilbarco Graco Husky Other

  • Ebsray
  • Regent
  • Blackmer
  • Redjacket
  • FE Petro
  • Compac
  • Transponder
  • Gilbarco
  • Graco
  • Husky
  • Other

• Type of Pump/Bowser/Dispenser:

• Pump/Bowser/Dispenser Model:

• Pump/Bowser/Dispenser Serial No:

• Photos of Pump/Bowser/Dispenser ID plate if preferred:

  Media

• Meter:

  Select Yes N/A

  • Yes
  • N/A

• Type of Meter:

  Select TCS MacNaught Gespasa Fillrite Gespasa Other

  • TCS
  • MacNaught
  • Gespasa
  • Fillrite
  • Gespasa
  • Other

• Type of meter:

• Meter Model:

• Meter Serial No:

• Photos of Meter ID plates if preferred:

  Media

• Filter:

  Select Yes N/A

  • Yes
  • N/A

• Type of Filter:

  Select Hydac Pall Donaldson Other

  • Hydac
  • Pall
  • Donaldson
  • Other

• Type of Filter:

• Filter Model:

• Filter Serial No:

• Photos of Filter ID plates if preferred:

  Media

• Nozzle type

  19mm Nozzle

  25mm Nozzle

  32mm Nozzle

  Banlaw

  Other

• Please state type of nozzle:

• Pump priming - Suction line has been primed via the prime point.

  Complete

  Not yet completed

  N/A

• Check for leaks? If no leaks present commence flow test.

  Complete

  Not yet completed

  N/A

• 6.1.1 - Flow rate - Litres per minute

• 6.1.2 - Delivery Pressure (Kpa) at dead head:

• 6.1.3 - Suction Pressure (-Kpa) at dead head:

• 6.1.4 - Delivery Pressure (Kpa) at full flow:

• 6.1.5 - Suction Pressure (-Kpa) at full flow:

• 6.1.6 - Light Vehicle No 1 flow test complete.

  Complete

  Not yet completed

  N/A

• 6.1.7 - Light Vehicle 1 flow rates are as per P & ID or as per customers request:

  Pass

  Fail

  N/A

6.2 - Flow Test - Light Vehicle No 2

• Product type:

  Diesel

  Unleaded

  Other

• Type of product:

• Pump/Bowser/Dispenser:

  Select Yes Same as Light Vehicle 1 N/A

  • Yes
  • Same as Light Vehicle 1
  • N/A

• Type of Pump/Bowser/Dispenser:

  Select TCS MacNaught Gespasa Fillrite Gespasa Other

  • TCS
  • MacNaught
  • Gespasa
  • Fillrite
  • Gespasa
  • Other

• Type of Pump/Bowser/Dispenser:

• Pump/Bowser/Dispenser Model:

• Pump/Bowser/Dispenser Serial No:

• Photos of Pump/Bowser/Dispenser ID plate if preferred:

  Media

• Meter:

  Select Yes Same as Light Vehicle 1 N/A

  • Yes
  • Same as Light Vehicle 1
  • N/A

• Type of Meter:

  Select TCS MacNaught Gespasa Fillrite Gespasa Other

  • TCS
  • MacNaught
  • Gespasa
  • Fillrite
  • Gespasa
  • Other

• Type of meter:

• Meter Model:

• Meter Serial No:

• Photos of Meter ID plates if preferred:

  Media

• Filter:

  Select Yes Same as Light Vehicle 1 N/A

  • Yes
  • Same as Light Vehicle 1
  • N/A

• Type of Filter:

  Select Hydac Pall Donaldson Other

  • Hydac
  • Pall
  • Donaldson
  • Other

• Type of Filter:

• Filter Model:

• Filter Serial No:

• Photos of Filter ID plates if preferred:

  Media

• Nozzle type

  19mm Nozzle

  25mm Nozzle

  32mm Nozzle

  Banlaw

  Other

• Please state type of nozzle:

• Pump priming - Suction line has been primed via the prime point.

  Complete

  Not yet completed

  N/A

• Check for leaks? If no leaks present commence flow test.

  Complete

  Not yet completed

  N/A

• 6.2.1 - Flow rate - Litres per minute

• 6.2.2 - Delivery Pressure (Kpa) at dead head:

• 6.2.3 - Suction Pressure (-Kpa) at dead head:

• 6.2.4 - Delivery Pressure (Kpa) at full flow:

• 6.2.5 - Suction Pressure (-Kpa) at full flow:

• 6.2.6 - Light Vehicle No 1 flow test complete.

  Complete

  Not yet completed

  N/A

• 6.2.7 - Light Vehicle 1 flow rates are as per P & ID or as per customers request:

  Pass

  Fail

  N/A

6.3 - Flow Test - Heavy Vehicle No 1

• Product type:

  Diesel

  Unleaded

  Other

• Type of product:

• Pump/Bowser/Dispenser:

  Select Yes N/A

  • Yes
  • N/A

• Type of Pump/Bowser/Dispenser:

  Select Ebsray Regent Blackmer Redjacket FE Petro Compac Transponder Gilbarco Graco Husky Other

  • Ebsray
  • Regent
  • Blackmer
  • Redjacket
  • FE Petro
  • Compac
  • Transponder
  • Gilbarco
  • Graco
  • Husky
  • Other

• Type of Pump/Bowser/Dispenser:

• Pump/Bowser/Dispenser Model:

• Pump/Bowser/Dispenser Serial No:

• Photos of Pump/Bowser/Dispenser ID plate if preferred:

  Media

• Meter:

  Select Yes Same as Light Vehicle 1 N/A

  • Yes
  • Same as Light Vehicle 1
  • N/A

• Type of Meter:

  Select TCS MacNaught Gespasa Fillrite Gespasa Other

  • TCS
  • MacNaught
  • Gespasa
  • Fillrite
  • Gespasa
  • Other

• Type of meter:

• Meter Model:

• Meter Serial No:

• Photos of Meter ID plates if preferred:

  Media

• Filter:

  Select Yes Same as Light Vehicle 1 N/A

  • Yes
  • Same as Light Vehicle 1
  • N/A

• Type of Filter:

  Select Hydac Pall Donaldson Other

  • Hydac
  • Pall
  • Donaldson
  • Other

• Type of Filter:

• Filter Model:

• Filter Serial No:

• Photos of Filter ID plates if preferred:

  Media

• Nozzle type

  19mm Nozzle

  25mm Nozzle

  32mm Nozzle

  Banlaw

  Other

• Please state type of nozzle:

• Pump priming - Suction line has been primed via the prime point.

  Complete

  Not yet completed

  N/A

• Check for leaks? If no leaks present commence flow test.

  Complete

  Not yet completed

  N/A

• 6.3.1 - Flow rate - Litres per minute

• 6.3.2 - Delivery Pressure (Kpa) at dead head:

• 6.3.3 - Suction Pressure (-Kpa) at dead head:

• 6.3.4 - Delivery Pressure (Kpa) at full flow:

• 6.3.5 - Suction Pressure (-Kpa) at full flow:

• 6.3.6 - Heavy Vehicle No 1 flow test complete.

  Complete

  Not yet completed

  N/A

• 6.3.7 - Heavy Vehicle 1 flow rates are as per P & ID or as per customers request:

  Pass

  Fail

  N/A

6.4 - Flow Test - Heavy Vehicle No 2

• Product type:

  Diesel

  Unleaded

  Other

• Type of product:

• Pump/Bowser/Dispenser:

  Select Yes Same as Heavy Vehicle 1 N/A

  • Yes
  • Same as Heavy Vehicle 1
  • N/A

• Type of Pump/Bowser/Dispenser:

  Select Ebsray Regent Blackmer Redjacket FE Petro Compac Transponder Gilbarco Graco Husky Other

  • Ebsray
  • Regent
  • Blackmer
  • Redjacket
  • FE Petro
  • Compac
  • Transponder
  • Gilbarco
  • Graco
  • Husky
  • Other

• Type of Pump/Bowser/Dispenser:

• Pump/Bowser/Dispenser Model:

• Pump/Bowser/Dispenser Serial No:

• Photos of Pump/Bowser/Dispenser ID plate if preferred:

  Media

• Meter:

  Select Yes Same as Light Vehicle 1 N/A

  • Yes
  • Same as Light Vehicle 1
  • N/A

• Type of Meter:

  Select TCS MacNaught Gespasa Fillrite Gespasa Other

  • TCS
  • MacNaught
  • Gespasa
  • Fillrite
  • Gespasa
  • Other

• Type of meter:

• Meter Model:

• Meter Serial No:

• Photos of Meter ID plates if preferred:

  Media

• Filter:

  Select Yes Same as Light Vehicle 1 N/A

  • Yes
  • Same as Light Vehicle 1
  • N/A

• Type of Filter:

  Select Hydac Pall Donaldson Other

  • Hydac
  • Pall
  • Donaldson
  • Other

• Type of Filter:

• Filter Model:

• Filter Serial No:

• Photos of Filter ID plates if preferred:

  Media

• Nozzle type

  19mm Nozzle

  25mm Nozzle

  32mm Nozzle

  Banlaw

  Other

• Please state type of nozzle:

• Pump priming - Suction line has been primed via the prime point.

  Complete

  Not yet completed

  N/A

• Check for leaks? If no leaks present commence flow test.

  Complete

  Not yet completed

  N/A

• 6.4.1 - Flow rate - Litres per minute

• 6.4.2 - Delivery Pressure (Kpa) at dead head:

• 6.4.3 - Suction Pressure (-Kpa) at dead head:

• 6.4.4 - Delivery Pressure (Kpa) at full flow:

• 6.4.5 - Suction Pressure (-Kpa) at full flow:

• 6.4.6 - Heavy Vehicle No 1 flow test complete.

  Complete

  Not yet completed

  N/A

• 6.4.7 - Heavy Vehicle 1 flow rates are as per P & ID or as per customers request:

  Pass

  Fail

  N/A

6.5 - Flow Test - Lubricant Compartment 1

• Lubricant Type:

  Select Engine Oil Transmission Oil Final Drive Oil Hydraulic Oil Coolant Grease Waste Oil Other

  • Engine Oil
  • Transmission Oil
  • Final Drive Oil
  • Hydraulic Oil
  • Coolant
  • Grease
  • Waste Oil
  • Other

• State type of product being used:

• Pump/Bowser/Dispenser:

  Select Yes N/A

  • Yes
  • N/A

• Type of Pump/Bowser/Dispenser:

  Select Ebsray Regent Blackmer Redjacket FE Petro Compac Transponder Gilbarco Graco Husky Other

  • Ebsray
  • Regent
  • Blackmer
  • Redjacket
  • FE Petro
  • Compac
  • Transponder
  • Gilbarco
  • Graco
  • Husky
  • Other

• Type of Pump/Bowser/Dispenser:

• Pump/Bowser/Dispenser Model:

• Pump/Bowser/Dispenser Serial No:

• Photos of Pump/Bowser/Dispenser ID plate if preferred:

  Media

• Meter:

  Select Yes Same as Light Vehicle 1 N/A

  • Yes
  • Same as Light Vehicle 1
  • N/A

• Type of Meter:

  Select TCS MacNaught Gespasa Fillrite Gespasa Other

  • TCS
  • MacNaught
  • Gespasa
  • Fillrite
  • Gespasa
  • Other

• Type of meter:

• Meter Model:

• Meter Serial No:

• Photos of Meter ID plates if preferred:

  Media

• Filter:

  Select Yes Same as Light Vehicle 1 N/A

  • Yes
  • Same as Light Vehicle 1
  • N/A

• Type of Filter:

  Select Hydac Pall Donaldson Other

  • Hydac
  • Pall
  • Donaldson
  • Other

• Type of Filter:

• Filter Model:

• Filter Serial No:

• Photos of Filter ID plates if preferred:

  Media

• Nozzle type

  Select Graco Banlaw Wiggins Gespasa Other

  • Graco
  • Banlaw
  • Wiggins
  • Gespasa
  • Other

• Please state type of nozzle if other:

• Comments:

• Pump priming - Suction line has been primed via the prime point.

  Complete

  Not yet completed

  N/A

• Check for leaks? If no leaks present commence flow test.

  Complete

  Not yet completed

  N/A

• 6.5.1 - Flow rate - Litres per minute

• 6.5.2 - Delivery Pressure (Kpa) at dead head:

• 6.5.3 - Suction Pressure (-Kpa) at dead head:

• 6.5.4 - Delivery Pressure (Kpa) at full flow:

• 6.5.5 - Suction Pressure (-Kpa) at full flow:

• 6.5.6 - Lubricant Compartment No 1 flow test complete.

  Complete

  Not yet completed

  N/A

• 6.5.7 - Lubricant Compartment No 1 flow rates are as per P & ID or as per customers request:

  Pass

  Fail

  N/A

6.6 - Flow Test - Lubricant Compartment 2

• Lubricant Type:

  Select Engine Oil Transmission Oil Final Drive Oil Hydraulic Oil Coolant Grease Waste Oil Other

  • Engine Oil
  • Transmission Oil
  • Final Drive Oil
  • Hydraulic Oil
  • Coolant
  • Grease
  • Waste Oil
  • Other

• State type of product being used:

• Pump/Bowser/Dispenser:

  Select Yes N/A

  • Yes
  • N/A

• Type of Pump/Bowser/Dispenser:

  Select Ebsray Regent Blackmer Redjacket FE Petro Compac Transponder Gilbarco Graco Husky Other

  • Ebsray
  • Regent
  • Blackmer
  • Redjacket
  • FE Petro
  • Compac
  • Transponder
  • Gilbarco
  • Graco
  • Husky
  • Other

• Type of Pump/Bowser/Dispenser:

• Pump/Bowser/Dispenser Model:

• Pump/Bowser/Dispenser Serial No:

• Photos of Pump/Bowser/Dispenser ID plate if preferred:

  Media

• Meter:

  Select Yes Same as Light Vehicle 1 N/A

  • Yes
  • Same as Light Vehicle 1
  • N/A

• Type of Meter:

  Select TCS MacNaught Gespasa Fillrite Gespasa Other

  • TCS
  • MacNaught
  • Gespasa
  • Fillrite
  • Gespasa
  • Other

• Type of meter:

• Meter Model:

• Meter Serial No:

• Photos of Meter ID plates if preferred:

  Media

• Filter:

  Select Yes Same as Light Vehicle 1 N/A

  • Yes
  • Same as Light Vehicle 1
  • N/A

• Type of Filter:

  Select Hydac Pall Donaldson Other

  • Hydac
  • Pall
  • Donaldson
  • Other

• Type of Filter:

• Filter Model:

• Filter Serial No:

• Photos of Filter ID plates if preferred:

  Media

• Nozzle type

  Select Graco Banlaw Wiggins Gespasa Other

  • Graco
  • Banlaw
  • Wiggins
  • Gespasa
  • Other

• Please state type of nozzle:

• Comments:

• Pump priming - Suction line has been primed via the prime point.

  Complete

  Not yet completed

  N/A

• Check for leaks? If no leaks present commence flow test.

  Complete

  Not yet completed

  N/A

• 6.6.1 - Flow rate - Litres per minute

• 6.6.2 - Delivery Pressure (Kpa) at dead head:

• 6.6.3 - Suction Pressure (-Kpa) at dead head:

• 6.6.4 - Delivery Pressure (Kpa) at full flow:

• 6.6.5 - Suction Pressure (-Kpa) at full flow:

• 6.6.6 - Lubricant Compartment No 2 flow test complete.

  Complete

  Not yet completed

  N/A

• 6.6.7 - Lubricant Compartment No 2 flow rates are as per P & ID or as per customers request:

  Pass

  Fail

  N/A

6.7 - Flow Test - Lubricant Compartment 3

• Lubricant Type:

  Select Engine Oil Transmission Oil Final Drive Oil Hydraulic Oil Coolant Grease Waste Oil Other

  • Engine Oil
  • Transmission Oil
  • Final Drive Oil
  • Hydraulic Oil
  • Coolant
  • Grease
  • Waste Oil
  • Other

• State type of product being used:

• Pump/Bowser/Dispenser:

  Select Yes N/A

  • Yes
  • N/A

• Type of Pump/Bowser/Dispenser:

  Select Ebsray Regent Blackmer Redjacket FE Petro Compac Transponder Gilbarco Graco Husky Other

  • Ebsray
  • Regent
  • Blackmer
  • Redjacket
  • FE Petro
  • Compac
  • Transponder
  • Gilbarco
  • Graco
  • Husky
  • Other

• Type of Pump/Bowser/Dispenser:

• Pump/Bowser/Dispenser Model:

• Pump/Bowser/Dispenser Serial No:

• Photos of Pump/Bowser/Dispenser ID plate if preferred:

  Media

• Meter:

  Select Yes Same as Light Vehicle 1 N/A

  • Yes
  • Same as Light Vehicle 1
  • N/A

• Type of Meter:

  Select TCS MacNaught Gespasa Fillrite Gespasa Other

  • TCS
  • MacNaught
  • Gespasa
  • Fillrite
  • Gespasa
  • Other

• Type of meter:

• Meter Model:

• Meter Serial No:

• Photos of Meter ID plates if preferred:

  Media

• Filter:

  Select Yes Same as Light Vehicle 1 N/A

  • Yes
  • Same as Light Vehicle 1
  • N/A

• Type of Filter:

  Select Hydac Pall Donaldson Other

  • Hydac
  • Pall
  • Donaldson
  • Other

• Type of Filter:

• Filter Model:

• Filter Serial No:

• Photos of Filter ID plates if preferred:

  Media

• Nozzle type

  Select Graco Banlaw Wiggins Gespasa Other

  • Graco
  • Banlaw
  • Wiggins
  • Gespasa
  • Other

• Please state type of nozzle if other:

• Comments:

• Pump priming - Suction line has been primed via the prime point.

  Complete

  Not yet completed

  N/A

• Check for leaks? If no leaks present commence flow test.

  Complete

  Not yet completed

  N/A

• 6.7.1 - Flow rate - Litres per minute

• 6.7.2 Delivery Pressure (Kpa) at dead head:

• 6.7.3 - Suction Pressure (-Kpa) at dead head:

• 6.7.4 - Delivery Pressure (Kpa) at full flow:

• 6.7.5 - Suction Pressure (-Kpa) at full flow:

• 6.7.6 - Lubricant Compartment No 3 flow test complete.

  Complete

  Not yet completed

  N/A

• 6.7.7 - Lubricant Compartment No 3 flow rates are as per P & ID or as per customers request:

  Pass

  Fail

  N/A

6.8 - Flow Test - Lubricant Compartment 4

• Lubricant Type:

  Select Engine Oil Transmission Oil Final Drive Oil Hydraulic Oil Coolant Grease Waste Oil Other

  • Engine Oil
  • Transmission Oil
  • Final Drive Oil
  • Hydraulic Oil
  • Coolant
  • Grease
  • Waste Oil
  • Other

• State type of product being used:

• Pump/Bowser/Dispenser:

  Select Yes N/A

  • Yes
  • N/A

• Type of Pump/Bowser/Dispenser:

  Select Ebsray Regent Blackmer Redjacket FE Petro Compac Transponder Gilbarco Graco Husky Other

  • Ebsray
  • Regent
  • Blackmer
  • Redjacket
  • FE Petro
  • Compac
  • Transponder
  • Gilbarco
  • Graco
  • Husky
  • Other

• Type of Pump/Bowser/Dispenser:

• Pump/Bowser/Dispenser Model:

• Pump/Bowser/Dispenser Serial No:

• Photos of Pump/Bowser/Dispenser ID plate if preferred:

  Media

• Meter:

  Select Yes Same as Light Vehicle 1 N/A

  • Yes
  • Same as Light Vehicle 1
  • N/A

• Type of Meter:

  Select TCS MacNaught Gespasa Fillrite Gespasa Other

  • TCS
  • MacNaught
  • Gespasa
  • Fillrite
  • Gespasa
  • Other

• Type of meter:

• Meter Model:

• Meter Serial No:

• Photos of Meter ID plates if preferred:

  Media

• Filter:

  Select Yes Same as Light Vehicle 1 N/A

  • Yes
  • Same as Light Vehicle 1
  • N/A

• Type of Filter:

  Select Hydac Pall Donaldson Other

  • Hydac
  • Pall
  • Donaldson
  • Other

• Type of Filter:

• Filter Model:

• Filter Serial No:

• Photos of Filter ID plates if preferred:

  Media

• Nozzle type

  Select Graco Banlaw Wiggins Gespasa Other

  • Graco
  • Banlaw
  • Wiggins
  • Gespasa
  • Other

• Please state type of nozzle if other:

• Comments:

• Pump priming - Suction line has been primed via the prime point.

  Complete

  Not yet completed

  N/A

• Check for leaks? If no leaks present commence flow test.

  Complete

  Not yet completed

  N/A

• 6.8.1 - Flow rate - Litres per minute

• 6.8.2 - Delivery Pressure (Kpa) at dead head:

• 6.8.3 - Suction Pressure (-Kpa) at dead head:

• 6.8.4 - Delivery Pressure (Kpa) at full flow:

• 6.8.5 - Suction Pressure (-Kpa) at full flow:

• 6.8.6 - Lubricant Compartment No 4 flow test complete.

  Complete

  Not yet completed

  N/A

• 6.8.7 - Lubricant Compartment No 4 flow rates are as per P & ID or as per customers request:

  Pass

  Fail

  N/A

6.9 - Flow Test - Lubricant Compartment 5

• Lubricant Type:

  Select Engine Oil Transmission Oil Final Drive Oil Hydraulic Oil Coolant Grease Waste Oil Other

  • Engine Oil
  • Transmission Oil
  • Final Drive Oil
  • Hydraulic Oil
  • Coolant
  • Grease
  • Waste Oil
  • Other

• State type of product being used:

• Pump/Bowser/Dispenser:

  Select Yes N/A

  • Yes
  • N/A

• Type of Pump/Bowser/Dispenser:

  Select Ebsray Regent Blackmer Redjacket FE Petro Compac Transponder Gilbarco Graco Husky Other

  • Ebsray
  • Regent
  • Blackmer
  • Redjacket
  • FE Petro
  • Compac
  • Transponder
  • Gilbarco
  • Graco
  • Husky
  • Other

• Type of Pump/Bowser/Dispenser:

• Pump/Bowser/Dispenser Model:

• Pump/Bowser/Dispenser Serial No:

• Photos of Pump/Bowser/Dispenser ID plate if preferred:

  Media

• Meter:

  Select Yes Same as Light Vehicle 1 N/A

  • Yes
  • Same as Light Vehicle 1
  • N/A

• Type of Meter:

  Select TCS MacNaught Gespasa Fillrite Gespasa Other

  • TCS
  • MacNaught
  • Gespasa
  • Fillrite
  • Gespasa
  • Other

• Type of meter:

• Meter Model:

• Meter Serial No:

• Photos of Meter ID plates if preferred:

  Media

• Filter:

  Select Yes Same as Light Vehicle 1 N/A

  • Yes
  • Same as Light Vehicle 1
  • N/A

• Type of Filter:

  Select Hydac Pall Donaldson Other

  • Hydac
  • Pall
  • Donaldson
  • Other

• Type of Filter:

• Filter Model:

• Filter Serial No:

• Photos of Filter ID plates if preferred:

  Media

• Nozzle type

  Select Graco Banlaw Wiggins Gespasa Other

  • Graco
  • Banlaw
  • Wiggins
  • Gespasa
  • Other

• Please state type of nozzle if other:

• Comments:

• Pump priming - Suction line has been primed via the prime point.

  Complete

  Not yet completed

  N/A

• Check for leaks? If no leaks present commence flow test.

  Complete

  Not yet completed

  N/A

• 6.9.1 - Flow rate - Litres per minute

• 6.9.2 - Delivery Pressure (Kpa) at dead head:

• 6.9.3 - Suction Pressure (-Kpa) at dead head:

• 6.9.4 - Delivery Pressure (Kpa) at full flow:

• 6.9.5 - Suction Pressure (-Kpa) at full flow:

• 6.9.6 - Lubricant Compartment No 5 flow test complete.

  Complete

  Not yet completed

  N/A

• 6.9.7 - Lubricant Compartment No 5 flow rates are as per P & ID or as per customers request:

  Pass

  Fail

  N/A

6.10 - Flow Test - Lubricant Compartment 6

• Lubricant Type:

  Select Engine Oil Transmission Oil Final Drive Oil Hydraulic Oil Coolant Grease Waste Oil Other

  • Engine Oil
  • Transmission Oil
  • Final Drive Oil
  • Hydraulic Oil
  • Coolant
  • Grease
  • Waste Oil
  • Other

• State type of product being used:

• Pump/Bowser/Dispenser:

  Select Yes N/A

  • Yes
  • N/A

• Type of Pump/Bowser/Dispenser:

  Select Ebsray Regent Blackmer Redjacket FE Petro Compac Transponder Gilbarco Graco Husky Other

  • Ebsray
  • Regent
  • Blackmer
  • Redjacket
  • FE Petro
  • Compac
  • Transponder
  • Gilbarco
  • Graco
  • Husky
  • Other

• Type of Pump/Bowser/Dispenser:

• Pump/Bowser/Dispenser Model:

• Pump/Bowser/Dispenser Serial No:

• Photos of Pump/Bowser/Dispenser ID plate if preferred:

  Media

• Meter:

  Select Yes Same as Light Vehicle 1 N/A

  • Yes
  • Same as Light Vehicle 1
  • N/A

• Type of Meter:

  Select TCS MacNaught Gespasa Fillrite Gespasa Other

  • TCS
  • MacNaught
  • Gespasa
  • Fillrite
  • Gespasa
  • Other

• Type of meter:

• Meter Model:

• Meter Serial No:

• Photos of Meter ID plates if preferred:

  Media

• Filter:

  Select Yes Same as Light Vehicle 1 N/A

  • Yes
  • Same as Light Vehicle 1
  • N/A

• Type of Filter:

  Select Hydac Pall Donaldson Other

  • Hydac
  • Pall
  • Donaldson
  • Other

• Type of Filter:

• Filter Model:

• Filter Serial No:

• Photos of Filter ID plates if preferred:

  Media

• Nozzle type

  Select Graco Banlaw Wiggins Gespasa Other

  • Graco
  • Banlaw
  • Wiggins
  • Gespasa
  • Other

• Please state type of nozzle if other:

• Comments:

• Pump priming - Suction line has been primed via the prime point.

  Complete

  Not yet completed

  N/A

• Check for leaks? If no leaks present commence flow test.

  Complete

  Not yet completed

  N/A

• 6.10.1 - Flow rate - Litres per minute

• 6.10.2 - Delivery Pressure (Kpa) at dead head:

• 6.10.3 - Suction Pressure (-Kpa) at dead head:

• 6.10.4 - Delivery Pressure (Kpa) at full flow:

• 6.10.5 - Suction Pressure (-Kpa) at full flow:

• 6.10.6 - Lubricant Compartment No 6 flow test complete.

  Complete

  Not yet completed

  N/A

• 6.10.7 - Lubricant Compartment No 6 flow rates are as per P & ID or as per customers request:

  Pass

  Fail

  N/A

7.0 - Photo's of site

• Please add photos of site here:

  Media

8.0 - Sign Off

• Commissioning complete.

  Complete

  Not yet completed

  N/A

• Signature of Transtank representative.

  Sign

• Please record any notes here:

  Yes

  No

  N/A

• Customer acceptance.

  Yes

  N/A

• Was your Transtank product installed to your satisfaction?

  Yes

  N/A

• Are all components and equipment functioning correctly?

  Yes

  N/A

• Was the site left in a clean and tidy state and to your satisfaction?

  Yes

  N/A

• Any comments you would like to add?

• Signature of Customer Representative.

  Sign

• Select date

  Date