Information

  • Document No.

  • Audit Title

  • Conducted on

  • Q.A personnel

Quality Insurance Inspection Nissan Patrol ULT Inspection.

  • Country Fire Authority Fleet Services Department

  • Appliance Manufacturer:

  • Inspection No T15/

  • Brigade:

  • DMO:

  • District

  • Date:

  • Time Commenced:

  • Time Completed:

  • Pump hour meter at start

  • Pump hour meter at finnish

  • Odometer at start

  • Odometer at finnish

  • Appliance Details

  • Registration Number:

  • Rego plate photo

  • Cab Chassis Manufacturer and Model Number

  • Nissan Patrol model number, PATROLZLAW4DX

  • Cab Chassis Vin: JN1UETY61A

  • Build date;

  • Vin No photo

  • Second Stage of Manufacture Plate, Approval number 29023, Carrolls springs P/L, 3940kg

  • Check correct alignment of shackles as fitted to rear springs. Bolt to top front side

  • Cab Chassis Engine Number: ZD30-

  • Cab Chassis Engine Number photo

  • Body Number/Date of manufacture: Kuipers Engineering

  • Body manufacture number if fitted

  • Fire Pump Manufacturer GAAM Mk70

  • Fire Pump Serial No:

  • Pump serial number photo

  • Fire Pump Date of Manufacture:

  • Fire Pump Engine Manufacturer and Model : Hatz 1B40

  • Fire Pump Engine Serial Number:

  • Pump engine serial no

  • CFA Radio Number: Serial No: RAD:

  • Radio and ext speaker operation

  • Radio test sheet provided

  • Aerial Identification Number

  • Bridgestone Dueler697 LT265/75R16

General inspection

Cabin interior

  • Interior lights

  • All dashboard and driving instrumentation and lighting

  • Air conditioning and climate controls

  • Windscreen wipers and washers.

  • OEM Hazards

  • Fast idle switch 1250 rpm nominal

  • Horn operation

  • Park brake operation

  • Bucket seats and seat belts

  • Sub-Fuel tank, empty/removed

  • OEM radio/Bluetooth working

  • Reverse camera fitted and working with correct orientation.

  • General cleanliness and interior detail

  • Check optional floor mats (CFA Supply)

  • Check hazard CS 202 control pad operation<br>1=Hazards and light bar<br>2=Hazards, light bar and headlight flashers (low beam)<br>3=Hazards, light bar, headlight flashers and siren<br><=right alley light<br>>=right alley light<br>0=cancel all<br>Hazards and light bar, red on the right blue on the left<br>

  • Reverse light and buzzer

  • All body maker fuses and relays labelled

  • Additional power supply for CB radio

  • Aux battery system fitted, complete with labeled emergency start decal on dashboard.

  • All body electrical systems to operate off aux battery, including pump start.

Cabin stowage

  • 2 x fire blankets, stowed behind drivers seat

  • 2x drink bottle holders, located between bucket seats

  • Document/map book holder, between seats

  • Map light, fitted to passenger side dash area . Wired to ignition.

  • Tait portable Radio charger, located between seats.

  • Documentation supplied in cabin

  • Hazmat DOT book

  • Nissan cab chassis, warranty and audio system manuals

  • Pump operating manual, with flow chart for pump, check serial number.

  • Quenchmaster manual

  • Tait radio manual

  • CFA Log book

  • 3x ULT operating manuals, one marked DMO COPY

Cabin and body decals

  • First aid kit location decal

  • Red Fire decals fitted to bonnet (reverse on driver's side), red with green outline fitted to rear of appliance

  • Seat belts must be worn decal

  • Front hubs for 4wd decal

  • Hazchem scale decal

  • Cfa decals fitted to doors

  • Tyre pressure decals fitted. Front 250kpa, Rear 375kpa.

  • Brigade name set, fitted to: both cab doors, windscreen and rear of appliance

  • Lime green/red chequer marking alone cabin and body.

  • 25mm outline marking, fitted to bull bar, cabin, sides and rear of appliance.

  • 000 decal fitted to side and rear of appliance (if possible)

  • Water signals decal, fitted to back of tank.

  • Fire lighter fuel and chainsaw fuel decal, fitted to chainsaw locker

  • Automatic fill decal, fitted to pump fuel tank

  • Quenchmaster, instruction and flush procedure decals fitted to rear of appliance.

  • Valve colour coding and numbering decals;<br>1=hard suction/hydrant boost line.<br>2=tank supply<br>3=tank fill<br>4=tank recirculation<br>5=pump cooling line<br>6=live hose reel<br>7=pump primer

Fire fighting body work

  • Lighting, including all locker lights, pump bay lights, reverse 45 deg and any unde tray lighting. Check spot light can be moved.

  • Aluminium tray and mounting, check nylon blockers and mounting method.

  • Cab chassis fuel filler, location and operation.

  • Overhead fill access and grab handles

  • Underbody, check routing and protection of wiring and lines.

  • All lockers;<br>T Latches<br>Seal arrangement<br>Vents<br>Drain holes and versatile flooring<br>Hinge arrangements <br>Rubber stops <br>

  • Front near side locker: adapters and bollards for stowage<br>-4x 38 mm bollards<br>-4x 64 mm bollards<br>-1x 65 mm stortz bollard<br>-2x 64 mm 3TPI FEMALE/65 stortz adaptor<br>-1x 65/75 stortz adaptor<br>-1x 65 stortz/38 mm wajax adaptor<br>Drink cooler<br>oil drain extension.

  • Rear near side locker, hose locker<br>-1x 15 meter 64 mm hose<br>-6x 30 meter 38 mm hose<br>-2x stortz spanners<br>2x L type keys<br>1x spray flow RB65 branch<br>1x protek 361<br>Assorted washers

  • Front offside locker;<br>CFA first aid kit<br>Foam emergency kit<br>

  • Rear offside locker;<br>Stihl MS311 chainsaw<br>Husky fuel container<br>Fire lighter fuel container<br>Toolbox<br>Chainsaw sharpening kit, helmet and chaps.<br>Funnel<br>Knapsack<br>Bolt cutters<br>Axe<br>Dry chem extinguisher<br>Vehicle jack and winch handle<br>

  • Top offside locker;<br>Hydrant and blank cap<br>1x 10 meter 38mm duraline hose<br>Live reel handles<br>

  • Tray stowage;<br>2x rakehoes<br>2x firebugs<br>1x 20 L A class foam carbon with pickup<br>Shovel<br>Pulaski<br>Towbar goose neck<br>5 meters of suction hose with foot valve<br>Live hose reel

Pump

  • Pump mounting

  • Exhaust arrangement, adequate mounting and protection

  • Fuel transfer pump and overflow arrangement.

  • Heat protection cowl fitted with adequate support

  • Electric start for Anderson coupling under tray. Tied together.

  • Check plumbing for leaks, mounting and rubber bellows.

  • Check tank fill and overflow arrangements

  • Sight tube

  • Pump control panel<br>Decals<br>All controls<br>Fuel pump warning light<br>Throttle controls<br>Operation of all gauges<br>

  • Low pressure test

  • Pump flow as per spec is;
    Max pressure: 950 kpa
    300 lpm at 700 kpa

  • Idle pump pressure;

  • Closed pump pressure

  • Flow at 200 kpa;

  • Flow at 300 kpa;

  • Flow at 400 kpa;

  • Flow at 500 kpa

  • Flow at 600 kpa;

  • Flow at 700 kpa;

  • A class works

  • Thermal relief valve tested

Road Test

Driving Test (nom. 20-30 km – on road and off road)

  • 4.1 Gear change operation when cold

  • 4.2 Transfer to 4WD. operation

  • 4.3 Low / High range selection

  • 4.4 Clutch operation and check heavy duty clutch is fitted

  • 4.5 Steering Wheel alignment/balance<br>Check particularly btwn. 60-80 km/hr<br>

  • 4.6 All instruments working

  • 4.7 Normal Braking.<br>Check straight line heavy braking to see if pulls to one side<br>

  • 4.8 Exhaust Braking

  • 4.9 No vibration

  • 4.10 No noises or rattles

  • 4.12 Engine operating temperature

  • 4.13 Check top road speed<br>Minimum 100 km/hour<br>

  • 4.14 Vehicle Fuel Tank Level

  • Cab chassis mirrors, check fitment and field of view

Brigade options

  • Donaldson flame retardant air filter element pt no. P902298

  • Air intake snorkel

  • Wide wheel rims to suit tyres

  • Warn winch and recovery kit if fitted

  • Check winch operation

  • Bonnet protector

  • Headlight protector

  • Towbar, wiring and gooseneck

General inspection

Other

  • Other items noted during inspection

  • Other items noted during inspection

  • Other items noted during inspection

  • Vehicle requires reinspection

  • Check and record pump engine hours and K's

  • Upon signature and advise from manufacturers the items in the follow ups list have been actioned, this vehicle has met CFA QA requirements.

  • Add signature

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.