Vacuum Testing of Gravity Sewer Pipelines

• Document No.

• Part No.

• Revision No.

• Client Name

• Project Name

• Inspection Started

  Date

• Prepared by

• Location
  Address

• Drawings Supplied

  Yes

  No

  N/A

• Drawing Number

• Drawing Revision

• Drawing Date

  Date

• Drawing Approval RPEQ

• Specifications Required

  Select SEQ Water Supply and Sewerage D&C Code Water Services Association AS/NZS 3500 Plumbing & Drainage Queensland Urban Utilities Gold Coast City Council Logan City Council Ipswich City Council Redland Shire Council Tweed Shire Council Ballina Shire Council Byron Shire Council Lismore City Council Project Specifications

  • SEQ Water Supply and Sewerage D&C Code
  • Water Services Association
  • AS/NZS 3500 Plumbing & Drainage
  • Queensland Urban Utilities
  • Gold Coast City Council
  • Logan City Council
  • Ipswich City Council
  • Redland Shire Council
  • Tweed Shire Council
  • Ballina Shire Council
  • Byron Shire Council
  • Lismore City Council
  • Project Specifications

• Pipeline Construction Type

  Select Unplasticised PVC Glass Reinforced Plastic Polypropylene Ductile Iron Cement Lined Mild Steel Cement Lined Vitrified Clay Reinforced Concrete Polycrete Polyethylene

  • Unplasticised PVC
  • Glass Reinforced Plastic
  • Polypropylene
  • Ductile Iron Cement Lined
  • Mild Steel Cement Lined
  • Vitrified Clay
  • Reinforced Concrete
  • Polycrete
  • Polyethylene

• Test Method SEQ Code Amendment to WSA02-2002-2.3, Clause 22.4.2.1
  
  Initial Vacuum Pressure = -27kPa
  Settle Time = 3 Minutes
  Test Vacuum Pressure = -23.60kPa
  Hold Time = As per Table 22.4
  Allowable Loss in Nominated Timeframe = 7kPa

• Pipeline Identification Details

• Pipeline Diameter

  Select 100mm diameter 150mm diameter 225mm diameter 250mm diameter 300mm diameter 375mm diameter 450mm diameter 525mm diameter 600mm diameter 675mm diameter 750mm diameter 900mm diameter 1000mm diameter 1050mm diameter 1200mm diameter 1500mm diameter Other

  • 100mm diameter
  • 150mm diameter
  • 225mm diameter
  • 250mm diameter
  • 300mm diameter
  • 375mm diameter
  • 450mm diameter
  • 525mm diameter
  • 600mm diameter
  • 675mm diameter
  • 750mm diameter
  • 900mm diameter
  • 1000mm diameter
  • 1050mm diameter
  • 1200mm diameter
  • 1500mm diameter
  • Other

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 2 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa for
  6 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 4 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 8 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 13 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 15 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 6 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 9 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 23 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 7 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 22 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 36 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 43 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 21 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 31 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 41 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 52 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 66 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 28 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 42 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 56 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 70 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 86 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 37 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 55 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 73 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 92 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 106 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Refer to WSA02-2002-2.3 Table 22.4 to extrapolate test hold time

• Actual Pipeline Diameter

• Pipeline Length (m)

• Nominate Extrapolated Hold Time

• RESULT

  PASS

  FAIL

• Additional Pipeline

  Off

  On

• Pipeline Identification Details

• Pipeline Diameter

  Select 100mm diameter 150mm diameter 225mm diameter 250mm diameter 300mm diameter 375mm diameter 450mm diameter 525mm diameter 600mm diameter 675mm diameter 750mm diameter 900mm diameter 1000mm diameter 1050mm diameter 1200mm diameter 1500mm diameter Other

  • 100mm diameter
  • 150mm diameter
  • 225mm diameter
  • 250mm diameter
  • 300mm diameter
  • 375mm diameter
  • 450mm diameter
  • 525mm diameter
  • 600mm diameter
  • 675mm diameter
  • 750mm diameter
  • 900mm diameter
  • 1000mm diameter
  • 1050mm diameter
  • 1200mm diameter
  • 1500mm diameter
  • Other

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 2 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa for
  6 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 4 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 8 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 13 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 15 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 6 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 9 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 23 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 7 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 22 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 36 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 43 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 21 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 31 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 41 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 52 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 66 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 28 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 42 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 56 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 70 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 86 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 37 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 55 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 73 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 92 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 106 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Refer to WSA02-2002-2.3 Table 22.4 to extrapolate test hold time

• Actual Pipeline Diameter

• Pipeline Length (m)

• Nominate Extrapolated Hold Time

• RESULT

  PASS

  FAIL

• Additional Pipeline

  Off

  On

• Pipeline Identification Details

• Pipeline Diameter

  Select 100mm diameter 150mm diameter 225mm diameter 250mm diameter 300mm diameter 375mm diameter 450mm diameter 525mm diameter 600mm diameter 675mm diameter 750mm diameter 900mm diameter 1000mm diameter 1050mm diameter 1200mm diameter 1500mm diameter Other

  • 100mm diameter
  • 150mm diameter
  • 225mm diameter
  • 250mm diameter
  • 300mm diameter
  • 375mm diameter
  • 450mm diameter
  • 525mm diameter
  • 600mm diameter
  • 675mm diameter
  • 750mm diameter
  • 900mm diameter
  • 1000mm diameter
  • 1050mm diameter
  • 1200mm diameter
  • 1500mm diameter
  • Other

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 2 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa for
  6 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 4 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 8 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 13 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 15 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 6 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 9 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 23 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 7 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 22 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 36 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 43 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 21 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 31 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 41 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 52 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 66 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 28 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 42 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 56 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 70 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 86 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 37 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 55 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 73 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 92 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 106 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Refer to WSA02-2002-2.3 Table 22.4 to extrapolate test hold time

• Actual Pipeline Diameter

• Pipeline Length (m)

• Nominate Extrapolated Hold Time

• RESULT

  PASS

  FAIL

• Additional Pipeline

  Off

  On

• Pipeline Identification Details

• Pipeline Diameter

  Select 100mm diameter 150mm diameter 225mm diameter 250mm diameter 300mm diameter 375mm diameter 450mm diameter 525mm diameter 600mm diameter 675mm diameter 750mm diameter 900mm diameter 1000mm diameter 1050mm diameter 1200mm diameter 1500mm diameter Other

  • 100mm diameter
  • 150mm diameter
  • 225mm diameter
  • 250mm diameter
  • 300mm diameter
  • 375mm diameter
  • 450mm diameter
  • 525mm diameter
  • 600mm diameter
  • 675mm diameter
  • 750mm diameter
  • 900mm diameter
  • 1000mm diameter
  • 1050mm diameter
  • 1200mm diameter
  • 1500mm diameter
  • Other

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 2 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa for
  6 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 4 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 8 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 13 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 15 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 6 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 9 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 23 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 7 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 22 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 36 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 43 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 21 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 31 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 41 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 52 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 66 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 28 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 42 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 56 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 70 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 86 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 37 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 55 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 73 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 92 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 106 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Refer to WSA02-2002-2.3 Table 22.4 to extrapolate test hold time

• Actual Pipeline Diameter

• Pipeline Length (m)

• Nominate Extrapolated Hold Time

• RESULT

  PASS

  FAIL

• Additional Pipeline

  Off

  On

• Pipeline Identification Details

• Pipeline Diameter

  Select 100mm diameter 150mm diameter 225mm diameter 250mm diameter 300mm diameter 375mm diameter 450mm diameter 525mm diameter 600mm diameter 675mm diameter 750mm diameter 900mm diameter 1000mm diameter 1050mm diameter 1200mm diameter 1500mm diameter Other

  • 100mm diameter
  • 150mm diameter
  • 225mm diameter
  • 250mm diameter
  • 300mm diameter
  • 375mm diameter
  • 450mm diameter
  • 525mm diameter
  • 600mm diameter
  • 675mm diameter
  • 750mm diameter
  • 900mm diameter
  • 1000mm diameter
  • 1050mm diameter
  • 1200mm diameter
  • 1500mm diameter
  • Other

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 2 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa for
  6 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 4 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 8 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 13 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 15 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 6 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 9 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 23 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 7 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 22 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 36 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 43 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 21 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 31 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 41 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 52 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 66 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 28 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 42 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 56 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 70 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 86 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 37 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 55 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 73 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 92 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 106 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Refer to WSA02-2002-2.3 Table 22.4 to extrapolate test hold time

• Actual Pipeline Diameter

• Pipeline Length (m)

• Nominate Extrapolated Hold Time

• RESULT

  PASS

  FAIL

• Additional Pipeline

  Off

  On

• Pipeline Identification Details

• Pipeline Diameter

  Select 100mm diameter 150mm diameter 225mm diameter 250mm diameter 300mm diameter 375mm diameter 450mm diameter 525mm diameter 600mm diameter 675mm diameter 750mm diameter 900mm diameter 1000mm diameter 1050mm diameter 1200mm diameter 1500mm diameter Other

  • 100mm diameter
  • 150mm diameter
  • 225mm diameter
  • 250mm diameter
  • 300mm diameter
  • 375mm diameter
  • 450mm diameter
  • 525mm diameter
  • 600mm diameter
  • 675mm diameter
  • 750mm diameter
  • 900mm diameter
  • 1000mm diameter
  • 1050mm diameter
  • 1200mm diameter
  • 1500mm diameter
  • Other

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 2 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa for
  6 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 4 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 8 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 13 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 15 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 6 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 9 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 23 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 7 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 22 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 36 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 43 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 21 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 31 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 41 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 52 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 66 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 28 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 42 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 56 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 70 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 86 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 37 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 55 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 73 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 92 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 106 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Refer to WSA02-2002-2.3 Table 22.4 to extrapolate test hold time

• Actual Pipeline Diameter

• Pipeline Length (m)

• Nominate Extrapolated Hold Time

• RESULT

  PASS

  FAIL

• Additional Pipeline

  Off

  On

• Pipeline Identification Details

• Pipeline Diameter

  Select 100mm diameter 150mm diameter 225mm diameter 250mm diameter 300mm diameter 375mm diameter 450mm diameter 525mm diameter 600mm diameter 675mm diameter 750mm diameter 900mm diameter 1000mm diameter 1050mm diameter 1200mm diameter 1500mm diameter Other

  • 100mm diameter
  • 150mm diameter
  • 225mm diameter
  • 250mm diameter
  • 300mm diameter
  • 375mm diameter
  • 450mm diameter
  • 525mm diameter
  • 600mm diameter
  • 675mm diameter
  • 750mm diameter
  • 900mm diameter
  • 1000mm diameter
  • 1050mm diameter
  • 1200mm diameter
  • 1500mm diameter
  • Other

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 2 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa for
  6 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 4 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 8 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 13 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 15 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 6 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 9 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 23 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 7 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 22 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 36 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 43 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 21 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 31 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 41 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 52 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 66 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 28 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 42 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 56 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 70 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 86 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 37 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 55 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 73 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 92 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 106 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Refer to WSA02-2002-2.3 Table 22.4 to extrapolate test hold time

• Actual Pipeline Diameter

• Pipeline Length (m)

• Nominate Extrapolated Hold Time

• RESULT

  PASS

  FAIL

• Additional Pipeline

  Off

  On

• Pipeline Identification Details

• Pipeline Diameter

  Select 100mm diameter 150mm diameter 225mm diameter 250mm diameter 300mm diameter 375mm diameter 450mm diameter 525mm diameter 600mm diameter 675mm diameter 750mm diameter 900mm diameter 1000mm diameter 1050mm diameter 1200mm diameter 1500mm diameter Other

  • 100mm diameter
  • 150mm diameter
  • 225mm diameter
  • 250mm diameter
  • 300mm diameter
  • 375mm diameter
  • 450mm diameter
  • 525mm diameter
  • 600mm diameter
  • 675mm diameter
  • 750mm diameter
  • 900mm diameter
  • 1000mm diameter
  • 1050mm diameter
  • 1200mm diameter
  • 1500mm diameter
  • Other

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 2 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa for
  6 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 4 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 8 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 13 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 15 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 6 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 9 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 23 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 7 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 22 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 36 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 43 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 21 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 31 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 41 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 52 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 66 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 28 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 42 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 56 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 70 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 86 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 37 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 55 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 73 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 92 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 106 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Refer to WSA02-2002-2.3 Table 22.4 to extrapolate test hold time

• Actual Pipeline Diameter

• Pipeline Length (m)

• Nominate Extrapolated Hold Time

• RESULT

  PASS

  FAIL

• Additional Pipeline

  Off

  On

• Pipeline Identification Details

• Pipeline Diameter

  Select 100mm diameter 150mm diameter 225mm diameter 250mm diameter 300mm diameter 375mm diameter 450mm diameter 525mm diameter 600mm diameter 675mm diameter 750mm diameter 900mm diameter 1000mm diameter 1050mm diameter 1200mm diameter 1500mm diameter Other

  • 100mm diameter
  • 150mm diameter
  • 225mm diameter
  • 250mm diameter
  • 300mm diameter
  • 375mm diameter
  • 450mm diameter
  • 525mm diameter
  • 600mm diameter
  • 675mm diameter
  • 750mm diameter
  • 900mm diameter
  • 1000mm diameter
  • 1050mm diameter
  • 1200mm diameter
  • 1500mm diameter
  • Other

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 2 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa for
  6 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 4 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 8 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 13 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 15 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 6 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 9 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 23 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 7 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 22 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 36 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 43 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 21 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 31 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 41 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 52 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 66 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 28 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 42 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 56 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 70 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 86 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 37 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 55 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 73 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 92 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 106 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Refer to WSA02-2002-2.3 Table 22.4 to extrapolate test hold time

• Actual Pipeline Diameter

• Pipeline Length (m)

• Nominate Extrapolated Hold Time

• RESULT

  PASS

  FAIL

• Additional Pipeline

  Off

  On

• Pipeline Identification Details

• Pipeline Diameter

  Select 100mm diameter 150mm diameter 225mm diameter 250mm diameter 300mm diameter 375mm diameter 450mm diameter 525mm diameter 600mm diameter 675mm diameter 750mm diameter 900mm diameter 1000mm diameter 1050mm diameter 1200mm diameter 1500mm diameter Other

  • 100mm diameter
  • 150mm diameter
  • 225mm diameter
  • 250mm diameter
  • 300mm diameter
  • 375mm diameter
  • 450mm diameter
  • 525mm diameter
  • 600mm diameter
  • 675mm diameter
  • 750mm diameter
  • 900mm diameter
  • 1000mm diameter
  • 1050mm diameter
  • 1200mm diameter
  • 1500mm diameter
  • Other

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 2 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa for
  6 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 4 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 8 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 13 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 15 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 6 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 9 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 23 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 7 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 22 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 36 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 43 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 21 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 31 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 41 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 52 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 66 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 28 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 42 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 56 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 70 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 86 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 37 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 55 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 73 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 92 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 106 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Refer to WSA02-2002-2.3 Table 22.4 to extrapolate test hold time

• Actual Pipeline Diameter

• Pipeline Length (m)

• Nominate Extrapolated Hold Time

• RESULT

  PASS

  FAIL

• Additional Pipeline

  Off

  On

• Pipeline Identification Details

• Pipeline Diameter

  Select 100mm diameter 150mm diameter 225mm diameter 250mm diameter 300mm diameter 375mm diameter 450mm diameter 525mm diameter 600mm diameter 675mm diameter 750mm diameter 900mm diameter 1000mm diameter 1050mm diameter 1200mm diameter 1500mm diameter Other

  • 100mm diameter
  • 150mm diameter
  • 225mm diameter
  • 250mm diameter
  • 300mm diameter
  • 375mm diameter
  • 450mm diameter
  • 525mm diameter
  • 600mm diameter
  • 675mm diameter
  • 750mm diameter
  • 900mm diameter
  • 1000mm diameter
  • 1050mm diameter
  • 1200mm diameter
  • 1500mm diameter
  • Other

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 2 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa for
  6 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 4 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 8 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 13 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 15 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 6 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 9 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 23 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 7 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 22 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 36 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 43 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 21 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 31 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 41 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 52 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 66 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 28 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 42 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 56 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 70 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 86 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 37 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 55 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 73 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 92 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 106 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Refer to WSA02-2002-2.3 Table 22.4 to extrapolate test hold time

• Actual Pipeline Diameter

• Pipeline Length (m)

• Nominate Extrapolated Hold Time

• RESULT

  PASS

  FAIL

• Additional Pipeline

  Off

  On

• Pipeline Identification Details

• Pipeline Diameter

  Select 100mm diameter 150mm diameter 225mm diameter 250mm diameter 300mm diameter 375mm diameter 450mm diameter 525mm diameter 600mm diameter 675mm diameter 750mm diameter 900mm diameter 1000mm diameter 1050mm diameter 1200mm diameter 1500mm diameter Other

  • 100mm diameter
  • 150mm diameter
  • 225mm diameter
  • 250mm diameter
  • 300mm diameter
  • 375mm diameter
  • 450mm diameter
  • 525mm diameter
  • 600mm diameter
  • 675mm diameter
  • 750mm diameter
  • 900mm diameter
  • 1000mm diameter
  • 1050mm diameter
  • 1200mm diameter
  • 1500mm diameter
  • Other

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 2 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa for
  6 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 4 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 8 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 13 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 15 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 6 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 9 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 23 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 7 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 22 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 36 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 43 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 21 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 31 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 41 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 52 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 66 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 28 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 42 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 56 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 70 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 86 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 37 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 55 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 73 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 92 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 106 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Refer to WSA02-2002-2.3 Table 22.4 to extrapolate test hold time

• Actual Pipeline Diameter

• Pipeline Length (m)

• Nominate Extrapolated Hold Time

• RESULT

  PASS

  FAIL

• Additional Pipeline

  Off

  On

• Pipeline Identification Details

• Pipeline Diameter

  Select 100mm diameter 150mm diameter 225mm diameter 250mm diameter 300mm diameter 375mm diameter 450mm diameter 525mm diameter 600mm diameter 675mm diameter 750mm diameter 900mm diameter 1000mm diameter 1050mm diameter 1200mm diameter 1500mm diameter Other

  • 100mm diameter
  • 150mm diameter
  • 225mm diameter
  • 250mm diameter
  • 300mm diameter
  • 375mm diameter
  • 450mm diameter
  • 525mm diameter
  • 600mm diameter
  • 675mm diameter
  • 750mm diameter
  • 900mm diameter
  • 1000mm diameter
  • 1050mm diameter
  • 1200mm diameter
  • 1500mm diameter
  • Other

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 2 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa for
  6 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 4 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 8 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 13 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 15 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 6 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 9 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 23 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 7 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 22 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 36 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 43 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 21 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 31 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 41 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 52 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 66 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 28 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 42 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 56 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 70 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 86 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 37 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 55 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 73 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 92 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 106 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Refer to WSA02-2002-2.3 Table 22.4 to extrapolate test hold time

• Actual Pipeline Diameter

• Pipeline Length (m)

• Nominate Extrapolated Hold Time

• RESULT

  PASS

  FAIL

• Additional Pipeline

  Off

  On

• Pipeline Identification Details

• Pipeline Diameter

  Select 100mm diameter 150mm diameter 225mm diameter 250mm diameter 300mm diameter 375mm diameter 450mm diameter 525mm diameter 600mm diameter 675mm diameter 750mm diameter 900mm diameter 1000mm diameter 1050mm diameter 1200mm diameter 1500mm diameter Other

  • 100mm diameter
  • 150mm diameter
  • 225mm diameter
  • 250mm diameter
  • 300mm diameter
  • 375mm diameter
  • 450mm diameter
  • 525mm diameter
  • 600mm diameter
  • 675mm diameter
  • 750mm diameter
  • 900mm diameter
  • 1000mm diameter
  • 1050mm diameter
  • 1200mm diameter
  • 1500mm diameter
  • Other

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 2 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa for
  6 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 4 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 8 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 13 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 15 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 6 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 9 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 23 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 7 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 22 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 36 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 43 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 21 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 31 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 41 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 52 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 66 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 28 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 42 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 56 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 70 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 86 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 37 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 55 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 73 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 92 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 106 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Refer to WSA02-2002-2.3 Table 22.4 to extrapolate test hold time

• Actual Pipeline Diameter

• Pipeline Length (m)

• Nominate Extrapolated Hold Time

• RESULT

  PASS

  FAIL

• Additional Pipeline

  Off

  On

• Pipeline Identification Details

• Pipeline Diameter

  Select 100mm diameter 150mm diameter 225mm diameter 250mm diameter 300mm diameter 375mm diameter 450mm diameter 525mm diameter 600mm diameter 675mm diameter 750mm diameter 900mm diameter 1000mm diameter 1050mm diameter 1200mm diameter 1500mm diameter Other

  • 100mm diameter
  • 150mm diameter
  • 225mm diameter
  • 250mm diameter
  • 300mm diameter
  • 375mm diameter
  • 450mm diameter
  • 525mm diameter
  • 600mm diameter
  • 675mm diameter
  • 750mm diameter
  • 900mm diameter
  • 1000mm diameter
  • 1050mm diameter
  • 1200mm diameter
  • 1500mm diameter
  • Other

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 2 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa for
  6 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 4 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 8 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 13 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 15 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 6 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 9 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 23 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 7 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 22 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 36 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 43 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 21 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 31 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 41 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 52 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 66 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 28 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 42 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 56 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 70 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 86 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 37 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 55 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 73 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 92 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 106 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Refer to WSA02-2002-2.3 Table 22.4 to extrapolate test hold time

• Actual Pipeline Diameter

• Pipeline Length (m)

• Nominate Extrapolated Hold Time

• RESULT

  PASS

  FAIL

• Additional Pipeline

  Off

  On

• Pipeline Identification Details

• Pipeline Diameter

  Select 100mm diameter 150mm diameter 225mm diameter 250mm diameter 300mm diameter 375mm diameter 450mm diameter 525mm diameter 600mm diameter 675mm diameter 750mm diameter 900mm diameter 1000mm diameter 1050mm diameter 1200mm diameter 1500mm diameter Other

  • 100mm diameter
  • 150mm diameter
  • 225mm diameter
  • 250mm diameter
  • 300mm diameter
  • 375mm diameter
  • 450mm diameter
  • 525mm diameter
  • 600mm diameter
  • 675mm diameter
  • 750mm diameter
  • 900mm diameter
  • 1000mm diameter
  • 1050mm diameter
  • 1200mm diameter
  • 1500mm diameter
  • Other

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 2 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa for
  6 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 4 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 8 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 13 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 15 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 6 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 9 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 23 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 7 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 22 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 36 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 43 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 21 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 31 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 41 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 52 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 66 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 28 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 42 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 56 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 70 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 86 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 37 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 55 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 73 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 92 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 106 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Refer to WSA02-2002-2.3 Table 22.4 to extrapolate test hold time

• Actual Pipeline Diameter

• Pipeline Length (m)

• Nominate Extrapolated Hold Time

• RESULT

  PASS

  FAIL

• Additional Pipeline

  Off

  On

• Pipeline Identification Details

• Pipeline Diameter

  Select 100mm diameter 150mm diameter 225mm diameter 250mm diameter 300mm diameter 375mm diameter 450mm diameter 525mm diameter 600mm diameter 675mm diameter 750mm diameter 900mm diameter 1000mm diameter 1050mm diameter 1200mm diameter 1500mm diameter Other

  • 100mm diameter
  • 150mm diameter
  • 225mm diameter
  • 250mm diameter
  • 300mm diameter
  • 375mm diameter
  • 450mm diameter
  • 525mm diameter
  • 600mm diameter
  • 675mm diameter
  • 750mm diameter
  • 900mm diameter
  • 1000mm diameter
  • 1050mm diameter
  • 1200mm diameter
  • 1500mm diameter
  • Other

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 2 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa for
  6 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 4 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 8 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 13 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 15 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 6 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 9 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 23 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 7 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 22 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 36 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 43 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 21 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 31 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 41 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 52 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 66 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 28 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 42 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 56 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 70 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 86 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 37 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 55 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 73 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 92 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 106 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Refer to WSA02-2002-2.3 Table 22.4 to extrapolate test hold time

• Actual Pipeline Diameter

• Pipeline Length (m)

• Nominate Extrapolated Hold Time

• RESULT

  PASS

  FAIL

• Additional Pipeline

  Off

  On

• Pipeline Identification Details

• Pipeline Diameter

  Select 100mm diameter 150mm diameter 225mm diameter 250mm diameter 300mm diameter 375mm diameter 450mm diameter 525mm diameter 600mm diameter 675mm diameter 750mm diameter 900mm diameter 1000mm diameter 1050mm diameter 1200mm diameter 1500mm diameter Other

  • 100mm diameter
  • 150mm diameter
  • 225mm diameter
  • 250mm diameter
  • 300mm diameter
  • 375mm diameter
  • 450mm diameter
  • 525mm diameter
  • 600mm diameter
  • 675mm diameter
  • 750mm diameter
  • 900mm diameter
  • 1000mm diameter
  • 1050mm diameter
  • 1200mm diameter
  • 1500mm diameter
  • Other

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 2 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa for
  6 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 4 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 8 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 13 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 15 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 6 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 9 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 23 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 7 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 22 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 36 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 43 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 21 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 31 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 41 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 52 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 66 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 28 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 42 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 56 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 70 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 86 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 37 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 55 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 73 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 92 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 106 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Refer to WSA02-2002-2.3 Table 22.4 to extrapolate test hold time

• Actual Pipeline Diameter

• Pipeline Length (m)

• Nominate Extrapolated Hold Time

• RESULT

  PASS

  FAIL

• Additional Pipeline

  Off

  On

• Pipeline Identification Details

• Pipeline Diameter

  Select 100mm diameter 150mm diameter 225mm diameter 250mm diameter 300mm diameter 375mm diameter 450mm diameter 525mm diameter 600mm diameter 675mm diameter 750mm diameter 900mm diameter 1000mm diameter 1050mm diameter 1200mm diameter 1500mm diameter Other

  • 100mm diameter
  • 150mm diameter
  • 225mm diameter
  • 250mm diameter
  • 300mm diameter
  • 375mm diameter
  • 450mm diameter
  • 525mm diameter
  • 600mm diameter
  • 675mm diameter
  • 750mm diameter
  • 900mm diameter
  • 1000mm diameter
  • 1050mm diameter
  • 1200mm diameter
  • 1500mm diameter
  • Other

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 2 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa for
  6 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 4 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 8 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 13 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 15 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 6 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 9 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 23 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 7 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 22 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 36 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 43 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 21 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 31 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 41 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 52 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 66 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 28 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 42 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 56 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 70 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 86 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 37 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 55 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 73 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 92 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 106 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Refer to WSA02-2002-2.3 Table 22.4 to extrapolate test hold time

• Actual Pipeline Diameter

• Pipeline Length (m)

• Nominate Extrapolated Hold Time

• RESULT

  PASS

  FAIL

• Additional Pipeline

  Off

  On

• Pipeline Identification Details

• Pipeline Diameter

  Select 100mm diameter 150mm diameter 225mm diameter 250mm diameter 300mm diameter 375mm diameter 450mm diameter 525mm diameter 600mm diameter 675mm diameter 750mm diameter 900mm diameter 1000mm diameter 1050mm diameter 1200mm diameter 1500mm diameter Other

  • 100mm diameter
  • 150mm diameter
  • 225mm diameter
  • 250mm diameter
  • 300mm diameter
  • 375mm diameter
  • 450mm diameter
  • 525mm diameter
  • 600mm diameter
  • 675mm diameter
  • 750mm diameter
  • 900mm diameter
  • 1000mm diameter
  • 1050mm diameter
  • 1200mm diameter
  • 1500mm diameter
  • Other

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 2 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa for
  6 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 4 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 8 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 13 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 15 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 6 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 9 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 23 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 7 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 22 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 36 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 43 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 21 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 31 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 41 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 52 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 66 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 28 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 42 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 56 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 70 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 86 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 37 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 55 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 73 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 92 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 106 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Refer to WSA02-2002-2.3 Table 22.4 to extrapolate test hold time

• Actual Pipeline Diameter

• Pipeline Length (m)

• Nominate Extrapolated Hold Time

• RESULT

  PASS

  FAIL

• Additional Pipeline

  Off

  On

• Pipeline Identification Details

• Pipeline Diameter

  Select 100mm diameter 150mm diameter 225mm diameter 250mm diameter 300mm diameter 375mm diameter 450mm diameter 525mm diameter 600mm diameter 675mm diameter 750mm diameter 900mm diameter 1000mm diameter 1050mm diameter 1200mm diameter 1500mm diameter Other

  • 100mm diameter
  • 150mm diameter
  • 225mm diameter
  • 250mm diameter
  • 300mm diameter
  • 375mm diameter
  • 450mm diameter
  • 525mm diameter
  • 600mm diameter
  • 675mm diameter
  • 750mm diameter
  • 900mm diameter
  • 1000mm diameter
  • 1050mm diameter
  • 1200mm diameter
  • 1500mm diameter
  • Other

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 2 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa for
  6 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 4 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 8 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 13 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 15 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 6 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 9 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 23 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 7 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 22 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 36 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 43 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 21 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 31 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 41 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 52 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 66 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 28 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 42 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 56 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 70 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 86 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 37 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 55 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 73 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 92 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 106 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Refer to WSA02-2002-2.3 Table 22.4 to extrapolate test hold time

• Actual Pipeline Diameter

• Pipeline Length (m)

• Nominate Extrapolated Hold Time

• RESULT

  PASS

  FAIL

• Additional Pipeline

  Off

  On

• Pipeline Identification Details

• Pipeline Diameter

  Select 100mm diameter 150mm diameter 225mm diameter 250mm diameter 300mm diameter 375mm diameter 450mm diameter 525mm diameter 600mm diameter 675mm diameter 750mm diameter 900mm diameter 1000mm diameter 1050mm diameter 1200mm diameter 1500mm diameter Other

  • 100mm diameter
  • 150mm diameter
  • 225mm diameter
  • 250mm diameter
  • 300mm diameter
  • 375mm diameter
  • 450mm diameter
  • 525mm diameter
  • 600mm diameter
  • 675mm diameter
  • 750mm diameter
  • 900mm diameter
  • 1000mm diameter
  • 1050mm diameter
  • 1200mm diameter
  • 1500mm diameter
  • Other

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 2 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa for
  6 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 4 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 8 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 13 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 15 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 6 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 9 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 23 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 7 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 22 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 36 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 43 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 21 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 31 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 41 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 52 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 66 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 28 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 42 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 56 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 70 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 86 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 37 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 55 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 73 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 92 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 106 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Refer to WSA02-2002-2.3 Table 22.4 to extrapolate test hold time

• Actual Pipeline Diameter

• Pipeline Length (m)

• Nominate Extrapolated Hold Time

• RESULT

  PASS

  FAIL

• Additional Pipeline

  Off

  On

• Pipeline Identification Details

• Pipeline Diameter

  Select 100mm diameter 150mm diameter 225mm diameter 250mm diameter 300mm diameter 375mm diameter 450mm diameter 525mm diameter 600mm diameter 675mm diameter 750mm diameter 900mm diameter 1000mm diameter 1050mm diameter 1200mm diameter 1500mm diameter Other

  • 100mm diameter
  • 150mm diameter
  • 225mm diameter
  • 250mm diameter
  • 300mm diameter
  • 375mm diameter
  • 450mm diameter
  • 525mm diameter
  • 600mm diameter
  • 675mm diameter
  • 750mm diameter
  • 900mm diameter
  • 1000mm diameter
  • 1050mm diameter
  • 1200mm diameter
  • 1500mm diameter
  • Other

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 2 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa for
  6 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 4 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 8 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 13 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 15 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 6 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 9 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 23 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 7 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 22 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 36 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 43 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 21 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 31 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 41 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 52 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 66 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 28 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 42 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 56 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 70 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 86 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 37 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 55 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 73 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 92 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 106 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Refer to WSA02-2002-2.3 Table 22.4 to extrapolate test hold time

• Actual Pipeline Diameter

• Pipeline Length (m)

• Nominate Extrapolated Hold Time

• RESULT

  PASS

  FAIL

• Additional Pipeline

  Off

  On

• Pipeline Identification Details

• Pipeline Diameter

  Select 100mm diameter 150mm diameter 225mm diameter 250mm diameter 300mm diameter 375mm diameter 450mm diameter 525mm diameter 600mm diameter 675mm diameter 750mm diameter 900mm diameter 1000mm diameter 1050mm diameter 1200mm diameter 1500mm diameter Other

  • 100mm diameter
  • 150mm diameter
  • 225mm diameter
  • 250mm diameter
  • 300mm diameter
  • 375mm diameter
  • 450mm diameter
  • 525mm diameter
  • 600mm diameter
  • 675mm diameter
  • 750mm diameter
  • 900mm diameter
  • 1000mm diameter
  • 1050mm diameter
  • 1200mm diameter
  • 1500mm diameter
  • Other

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 2 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa for
  6 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 4 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 8 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 13 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 15 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 6 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 9 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 23 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 7 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 22 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 36 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 43 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 21 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 31 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 41 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 52 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 66 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 28 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 42 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 56 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 70 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 86 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 37 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 55 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 73 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 92 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 106 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Refer to WSA02-2002-2.3 Table 22.4 to extrapolate test hold time

• Actual Pipeline Diameter

• Pipeline Length (m)

• Nominate Extrapolated Hold Time

• RESULT

  PASS

  FAIL

• Additional Pipeline

  Off

  On

• Pipeline Identification Details

• Pipeline Diameter

  Select 100mm diameter 150mm diameter 225mm diameter 250mm diameter 300mm diameter 375mm diameter 450mm diameter 525mm diameter 600mm diameter 675mm diameter 750mm diameter 900mm diameter 1000mm diameter 1050mm diameter 1200mm diameter 1500mm diameter Other

  • 100mm diameter
  • 150mm diameter
  • 225mm diameter
  • 250mm diameter
  • 300mm diameter
  • 375mm diameter
  • 450mm diameter
  • 525mm diameter
  • 600mm diameter
  • 675mm diameter
  • 750mm diameter
  • 900mm diameter
  • 1000mm diameter
  • 1050mm diameter
  • 1200mm diameter
  • 1500mm diameter
  • Other

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 2 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa for
  6 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 4 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 8 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 13 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 15 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 6 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 9 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 23 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 7 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 22 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 36 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 43 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 21 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 31 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 41 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 52 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 66 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 28 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 42 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 56 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 70 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 86 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 37 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 55 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 73 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 92 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 106 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Refer to WSA02-2002-2.3 Table 22.4 to extrapolate test hold time

• Actual Pipeline Diameter

• Pipeline Length (m)

• Nominate Extrapolated Hold Time

• RESULT

  PASS

  FAIL

• Additional Pipeline

  Off

  On

• Pipeline Identification Details

• Pipeline Diameter

  Select 100mm diameter 150mm diameter 225mm diameter 250mm diameter 300mm diameter 375mm diameter 450mm diameter 525mm diameter 600mm diameter 675mm diameter 750mm diameter 900mm diameter 1000mm diameter 1050mm diameter 1200mm diameter 1500mm diameter Other

  • 100mm diameter
  • 150mm diameter
  • 225mm diameter
  • 250mm diameter
  • 300mm diameter
  • 375mm diameter
  • 450mm diameter
  • 525mm diameter
  • 600mm diameter
  • 675mm diameter
  • 750mm diameter
  • 900mm diameter
  • 1000mm diameter
  • 1050mm diameter
  • 1200mm diameter
  • 1500mm diameter
  • Other

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 2 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa for
  6 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 4 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 8 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 13 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 15 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 6 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 9 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 23 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 7 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 22 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 36 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 43 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 21 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 31 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 41 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 52 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 66 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 28 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 42 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 56 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 70 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 86 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 37 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 55 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 73 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 92 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 106 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Refer to WSA02-2002-2.3 Table 22.4 to extrapolate test hold time

• Actual Pipeline Diameter

• Pipeline Length (m)

• Nominate Extrapolated Hold Time

• RESULT

  PASS

  FAIL

• Additional Pipeline

  Off

  On

• Pipeline Identification Details

• Pipeline Diameter

  Select 100mm diameter 150mm diameter 225mm diameter 250mm diameter 300mm diameter 375mm diameter 450mm diameter 525mm diameter 600mm diameter 675mm diameter 750mm diameter 900mm diameter 1000mm diameter 1050mm diameter 1200mm diameter 1500mm diameter Other

  • 100mm diameter
  • 150mm diameter
  • 225mm diameter
  • 250mm diameter
  • 300mm diameter
  • 375mm diameter
  • 450mm diameter
  • 525mm diameter
  • 600mm diameter
  • 675mm diameter
  • 750mm diameter
  • 900mm diameter
  • 1000mm diameter
  • 1050mm diameter
  • 1200mm diameter
  • 1500mm diameter
  • Other

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 2 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa for
  6 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 4 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 8 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 13 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 15 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 6 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 9 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 23 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 7 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 22 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 36 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 43 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 21 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 31 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 41 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 52 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 66 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 28 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 42 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 56 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 70 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 86 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 37 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 55 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 73 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 92 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 106 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Refer to WSA02-2002-2.3 Table 22.4 to extrapolate test hold time

• Actual Pipeline Diameter

• Pipeline Length (m)

• Nominate Extrapolated Hold Time

• RESULT

  PASS

  FAIL

• Additional Pipeline

  Off

  On

• Pipeline Identification Details

• Pipeline Diameter

  Select 100mm diameter 150mm diameter 225mm diameter 250mm diameter 300mm diameter 375mm diameter 450mm diameter 525mm diameter 600mm diameter 675mm diameter 750mm diameter 900mm diameter 1000mm diameter 1050mm diameter 1200mm diameter 1500mm diameter Other

  • 100mm diameter
  • 150mm diameter
  • 225mm diameter
  • 250mm diameter
  • 300mm diameter
  • 375mm diameter
  • 450mm diameter
  • 525mm diameter
  • 600mm diameter
  • 675mm diameter
  • 750mm diameter
  • 900mm diameter
  • 1000mm diameter
  • 1050mm diameter
  • 1200mm diameter
  • 1500mm diameter
  • Other

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 2 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa for
  6 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 4 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 8 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 13 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 15 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 6 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 9 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 23 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 7 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 22 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 36 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 43 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 21 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 31 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 41 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 52 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 66 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 28 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 42 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 56 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 70 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 86 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 37 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 55 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 73 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 92 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 106 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Refer to WSA02-2002-2.3 Table 22.4 to extrapolate test hold time

• Actual Pipeline Diameter

• Pipeline Length (m)

• Nominate Extrapolated Hold Time

• RESULT

  PASS

  FAIL

• Additional Pipeline

  Off

  On

• Pipeline Identification Details

• Pipeline Diameter

  Select 100mm diameter 150mm diameter 225mm diameter 250mm diameter 300mm diameter 375mm diameter 450mm diameter 525mm diameter 600mm diameter 675mm diameter 750mm diameter 900mm diameter 1000mm diameter 1050mm diameter 1200mm diameter 1500mm diameter Other

  • 100mm diameter
  • 150mm diameter
  • 225mm diameter
  • 250mm diameter
  • 300mm diameter
  • 375mm diameter
  • 450mm diameter
  • 525mm diameter
  • 600mm diameter
  • 675mm diameter
  • 750mm diameter
  • 900mm diameter
  • 1000mm diameter
  • 1050mm diameter
  • 1200mm diameter
  • 1500mm diameter
  • Other

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 2 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa for
  6 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 4 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 8 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 13 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 15 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 6 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 9 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 23 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 7 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 22 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 36 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 43 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 21 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 31 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 41 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 52 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 66 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 28 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 42 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 56 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 70 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 86 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 37 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 55 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 73 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 92 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 106 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Refer to WSA02-2002-2.3 Table 22.4 to extrapolate test hold time

• Actual Pipeline Diameter

• Pipeline Length (m)

• Nominate Extrapolated Hold Time

• RESULT

  PASS

  FAIL

• Additional Pipeline

  Off

  On

• Pipeline Identification Details

• Pipeline Diameter

  Select 100mm diameter 150mm diameter 225mm diameter 250mm diameter 300mm diameter 375mm diameter 450mm diameter 525mm diameter 600mm diameter 675mm diameter 750mm diameter 900mm diameter 1000mm diameter 1050mm diameter 1200mm diameter 1500mm diameter Other

  • 100mm diameter
  • 150mm diameter
  • 225mm diameter
  • 250mm diameter
  • 300mm diameter
  • 375mm diameter
  • 450mm diameter
  • 525mm diameter
  • 600mm diameter
  • 675mm diameter
  • 750mm diameter
  • 900mm diameter
  • 1000mm diameter
  • 1050mm diameter
  • 1200mm diameter
  • 1500mm diameter
  • Other

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 2 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 3 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa for
  6 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 4 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 5 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 8 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 13 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 15 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 6 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 9 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 23 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 7 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 22 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 29 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 36 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 43 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 10 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 21 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 31 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 41 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 52 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 66 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 14 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 28 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 42 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 56 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 70 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 86 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Pipeline Length (m)

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 18 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 37 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 55 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 73 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 92 MINUTES

• Accept the pipeline under test if the test vacuum loss is =/<7kPa in 106 MINUTES

• Consider retesting in shorter lines as this length is outside the Specifications

• Refer to WSA02-2002-2.3 Table 22.4 to extrapolate test hold time

• Actual Pipeline Diameter

• Pipeline Length (m)

• Nominate Extrapolated Hold Time

• RESULT

  PASS

  FAIL

• Additional Pipeline

  Off

  On

• Enter details of Project Specifications Must include initial vacuum pressure, settle time, allowable time and final drop vacuum pressure

• Line Number

• Pipeline Construction Type

  Select Unplasticised PVC Glass Reinforced Plastic Polypropylene Ductile Iron Cement Lined Mild Steel Cement Lined Vitrified Clay Reinforced Concrete Polycrete Polyethylene

  • Unplasticised PVC
  • Glass Reinforced Plastic
  • Polypropylene
  • Ductile Iron Cement Lined
  • Mild Steel Cement Lined
  • Vitrified Clay
  • Reinforced Concrete
  • Polycrete
  • Polyethylene

• Pipeline Diameter

  Select 100mm diameter 150mm diameter 225mm diameter 250mm diameter 300mm diameter 375mm diameter 450mm diameter 525mm diameter 600mm diameter 675mm diameter 750mm diameter 900mm diameter 1000mm diameter 1050mm diameter 1200mm diameter 1500mm diameter Other

  • 100mm diameter
  • 150mm diameter
  • 225mm diameter
  • 250mm diameter
  • 300mm diameter
  • 375mm diameter
  • 450mm diameter
  • 525mm diameter
  • 600mm diameter
  • 675mm diameter
  • 750mm diameter
  • 900mm diameter
  • 1000mm diameter
  • 1050mm diameter
  • 1200mm diameter
  • 1500mm diameter
  • Other

• Actual Pipeline Diameter

• Pipeline Length (m)

• RESULT

  PASS

  FAIL

Confirm Project Information

• Pipelines to be inspected and their details

• Testing specification requirements

Initial Work Area Inspection

• Is test area barricaded off or sufficiently delineated?

  Yes

  No

  N/A

• Is traffic control established?

  Yes

  No

  N/A

• Has a Safe Work Method Statement been completed and all control measures followed?

  Yes

  No

  N/A

• Has a Confined Space Risk Assessment & Entry Permit been completed?

  Yes

  No

  N/A

• Is the confined space equipment and procedures set up as per the Risk Assessment & Entry Permit conditions followed?

  Yes

  No

  N/A

• Structure lids removed and placed at a safe distance from the entry point

• Environmental controls installed as and if required

Inspection Steps

• Equipment checked and in good working order

  Yes

  No

  N/A

• Insert test plugs into the structure inlets with extendable pole if possible

• Inflate plugs and add support as per manufacturer's specifications

• Attach bypass plug to vacuum pump and vacuum down pipeline to test pressure

• Allow for vacuum to stabilise for an amount of time as per specifications

• Hold vacuum for time specified in specifications and record result

Disassemble Steps

• Disconnect hose from vacuum pump and release pressure from pipeline

• Release pressure from plugs and carefully retrieve plugs out of structure

• Replace structure lids, remove barricading and return all items to test unit

Final Demobilisation

• Notify client of results and to contact TestX office to arrange further testing or reports

• Calibrated gauge numbers used

• Inspector's remarks

• Photo of work area and inspected pipeline

  Media

• I declare that the inspection procedure was followed in accordance with the nominated specifications

  Sign

• Inspection Completed

  Date

• Report Issue Date

Report Approval - Cam Reid