Information
-
All Arrow sites, irrespective of size or duration, must be actively monitored using the Arrow Weekly HS&E Inspection Tool and the outcomes and actions discussed in consultation and engagement with Arrow staff and subcontractor employees (and other stakeholder employees) at the on-site weekly H&SE meetings.
-
Completed by:
-
Workplace / Site:
-
Date:
-
Project no:
-
Report number
ITEM
Scaffolding & Mobile Towers
-
Scaffolding erected by competent person
-
Safe Access to scaffold platform
-
Adequate guard rails and toe boards
-
Internal and mid guard rails in place
-
Fully boarded out working platform
Personal Protective Equipment (PPE)
-
Mandatory PPE worn by all employees
-
Task related PPE worn (eye, ear, etc.)
-
Suitable respirator for the task
-
App PPE stored when not in use
Excavations
-
Excavation permit issued before dig
-
Underground services identified
-
Safe access to excavation provided
-
Excavation sides battered correctly
-
Protection barriers - deep excavation
-
Effective shoring and trench box
Electrical
-
Electrical leads in good condition and tagged (3 mth)
-
Tools in good condition, guards
-
Commercial splitter box with RCD
-
Safe position of electrical cables and leads
Elevated Work Platforms
-
Operator has EWP training or competency
-
EWP deck clear of debris
-
EWP displays a valid 6 month inspection
-
Guard rail, baskets in safe condition
-
Set up on level ground with support legs
-
Harness & fall restraint lanyard being worn
Ladders & Step Ladders
-
Ladders secured and correct angle
-
Projects 1m above step off point
-
Commercial step ladder being used
-
Step ladder being used correctly
-
No one standing above top 2 rungs
-
No defects to ladder or step ladder
Cranes / Hiabs
-
Lifting area isolated from others
-
Current test certificate displayed
-
Chains / slings certified & current
-
Trained crane and/or hiab Operator
-
All loads correctly secured / chocked
-
Lifting Plan agreed and implemented
Mobile Plant
-
Fitted roll over protection & seatbelt
-
Competent and/or trained operators
-
Warning devices operating correctly
-
Dangerous parts correctly guarded
Welding & Gas Cutting
-
How works permit issued / shields used
-
Extinguisher nearby / correct PPE
Housekeeping / Welfare
-
Work areas clean, tidy and accessible
-
Serviced fire extinguishers and stocked First Aid kits in place
-
Holes securely guarded or covered
-
Material and plant safely stored
-
Clean toilets and smoko sheds
-
Hazardous substances stored safely
-
Safe access / egress to all areas
Work at Height
-
All fall hazards controlled by Elimination or Isolation controls
-
Fall arrest/restraint systems in place
-
Above installed by a competent person
-
Employees trained in harness use
-
Harness and lanyards in safe condition
-
Emergency rescue plan in place
Temporary Works
-
Is there safe access to the formwork
-
Attached scaffold erected by scaffolder
-
Shore loading frames / props plumb
-
Acrow props vertical and secured
-
Panel props secured to flat surface
-
Panel props capable of securing the load
Work Equipment
-
Work Benches set up correctly & safe
-
Tool guards are secured and effective
-
Angle grinder guard and handle in place
-
Angle grinder operating dead man switch
-
Adequate lighting for work bench
-
Cutting areas isolated from others
Environmental Management
-
Are there suitable silt controls in place
-
Is there a spill control kit in place
-
Are all stockpiles controlled with silt fences
-
Are site vehicles kept to defined haul roads
-
Are all drains and gutters clear
-
Is there a specific hand tool wash down area
-
Are finishing trades removing their own wash down waste
-
Is dust controlled
-
Has water suppression been introduced
-
Has all known asbestos been removed prior to structure demo
-
Are noise levels being monitored as and when required
-
If required, Is there a truck tyre wash system in place
-
Pedestrians, vehicles and others isolated from work activites
NOTES
-
Add Note
-
Add Sketch
-
Add additional photos/media