5.11.6 Mesh/Rail Handover

• Select report Title

  Select SAFETY MESH HANDOVER & ROOF ACCESS CERTIFICATE

  • SAFETY MESH HANDOVER & ROOF ACCESS CERTIFICATE

• Project Name and/or NR Job Number

• Site Address

• Conducted on

  Date

• Roof Section/s

• Safety Mesh Installer

• Person Inspecting Mesh/Rail

SAFETY MESH

• MESH CRITERIA - Does the safety mesh materials comply with the performance requirements of AS/NZS 4389:2015 / HB39?

  Yes

  No

  N/A

• PLACEMENT OF MESH - Has the safety mesh been installed in accordance with AS/NZS 4389:2015 / HB39? If not, has the safety mesh been placed in accordance with manufacture's recommendations?

  Yes

  No

  N/A

• 

• Is the mesh tied to the structure as per above with a minimum of 4 full turns

  Yes

  No

  N/A

• Select purlin spacing

  Less than 1200mm

  1200 - 2199mm

  2200mm or greater

• 

• Does the mesh have a side lap of a minimum 150mm

  Yes

  No

  N/A

• 

• Does the mesh have a side lap of a minimum 150mm and fastened with 2mm ring fastener at 900mm centres between each purlin

  Yes

  No

  N/A

• 

• Does the mesh have a side lap of a minimum of 300mm and fastened with 2mm ring fasteners at max 600mm centres between each purlin - both sides of the lap

  Yes

  No

  N/A

• Are there any joins in the mesh

  Yes

  No

• 

• Do the joins in the mesh match the above detail

  Yes

  No

  N/A

EDGE PROTECTION

• IF USING GUARD RAIL SYSTEM, IS IT APPROPRIATE FOR THE TYPE OF ROOF?

  Yes

  No

  N/A

• IF USING "GUTTER GUARD RAIL BRACKET" SYSTEM, HAS IT BEEN INSPECTED BY NR SUPERVISOR?

  Yes

  No

  N/A

• ROOF GUARD RAIL INSTALLED and HANDOVER CERTIFICATE RECEIVED?

  Yes

  No

  N/A

• ROOF ACCESS GATE/S INSTALLED?

  Yes

  No

  N/A

• The information above has been received and sighted and as such access is granted to the following section/s of roof: (use grid lines or attach a marked up plan below):

• Attach marked up plans to show approved areas

  Media

• Inspected by

  Sign

• Position

  Site Supervisor

  Safety Advisor