Title Page

  • Client / Site: Barwon Water - Black Rock WRP Inlet Works Upgrade 400 Black Rock Cable ID No:

  • Conducted on

DETAILS

  • Inspection Area:

  • Reference: BW Technical Specification Rev 0 Clause: 38.3 Cables 38.4 Cable Installation - General 38.5 Conductor Termination

  • Document No. CA-CS-005 ITP No:

CABLE DETAILS

  • Origin:

  • Destination:

  • Size and Type:

  • Cables for VSD drives motors shall be shielded by integral earthed screen

  • There shall be no more 1 conductor per screw or tunnel type terminal

  • Stainless steel cable ID's fitted to cables below gland plate

  • Shrouds have been fitted over glands and secured in place (where required)

  • Power cables shall have stranded conductors having a minimum cross sectional area of 2.5 mm2

  • EMC Cable glands are correct type / size and have been tightened

  • Wiring numbers clearly identified by ferrules

  • Notes/Comments

TESTING

  • Core colour:

  • Continuity Test - OHMS Confirmed

  • Insulation Resistance MEGOHM Reading

  • Wire No Clearly Identified<br>

  • Core Colour:

  • Continuity Test - OHMS Confirmed

  • Insulation Resistance MEGOHM Reading

  • Visual Inspection undertaken

  • Wire No Clearly Identified

  • Core Colour:

  • Continuity Test - OHMS Confirmed

  • Insulation Resistance MEGOHM Reading

  • Visual Inspection undertaken

  • Wire No Clearly Identified

  • Core Colour:

  • Continuity Test - OHMS Confirmed

  • Insulation Resistance MEGOHM Reading

  • Visual Inspection undertaken

  • Wire No Clearly Identified

  • Core Colour:

  • Continuity Test - OHMS Confirmed

  • Insulation Resistance MEGOHM Reading

  • Connected to Earth both ends

APPROVALS

  • Cable Installation is

  • Actions to be taken:

  • Entered on Punch List

  • Punch list Reference Number:

  • Item No:

  • Meter Make & Model:

  • Meter Serial Number:

  • Calibration Date

  • Person Completing the Checklist

  • Signature:

  • Agfab Approval By:

  • Signature:

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.