Report Prepared By:
Sizing verified per contract and shop drawings?
Slope is verified per contract and shop drawings
All piping and fittings are installed Plumb and square?
Clean outs are installed as shown?
Brazing or soldering has been visually inspected?
Dissimilar Metals have been isolated?
Piping has been hydro tested per spec?
Inspection drawings are up to date and signed?
Connection to equipment and trap depths are per manufacturers installation manual?
Stub outs to lavatories are at the correct height?
Hangers installed at Location/Spacing per spec?
Hanger size and model per submittal?
Vertical hanger rods are plumb?
All hanger rod nuts and cross bolts are tight?
Seismic/Sway bracing installed as required?
Inserts and shields are installed as required?
Piping secured per spec and is not loose?
Dissimilar metals have been isolated?
All stub outs are secure?
All stub out heights have been verified?
Riser clamps are installed as required?
Fixture backing is installed as required?
Insulation installation complete per spec?
Shields and inserts installed if required?
Fire sound caulking is installed correctly
Labels installed and directional arrows are correct.
Notes, Impacts, or Comments