Report prepared by:
Sizing verified per contract and shop drawings?
Slope is verified per contract and shop drawings?
All Piping and fittings are installed plumb and square?
All couplings are installed square?
All couplings have been tourqued?
Storm/Overflow piping verified no cross connect?
Clean outs are installed as shown?
Risers are supported at the base?
All Piping has been tested per spec?
All rough in heights are verified?
Inspection drawings are up to date and signed?
Clean outs are installed as required?
Hangers installed at locations/spacing per spec?
Hanger size and model per submittal?
Vertical hanger rods are plumb?
All hanger rod nuts and cross bolts are tight?
Seismic/Sway Bracing installed as required?
Labels are installed per spec and in clear locations
Storm/Overflow labels not crossed?
Directional arrows are verified correct
Strapping at intervals per spec?
Couplings are secured/rodded as required?
Riser clamps are installed?
Fire caulking is complete?
Test Tee's/Wye's are not protruding out of the wall?
Plugs and caps installed in test Tee's/Wye's
Clean outs are clearly identified and cut out for?
Water closet carriers are anchored per Manufacturers instructions?
Notes, Impacts, or Comments