Information
-
Service Rig Company
-
District
-
Conducted on
-
Prepared by
-
Location
-
Rig Operator
-
Service Rig Number
General
-
Adequate distance from overhead power lines?
-
Is the service rig hazard sign displayed?
-
Is a first aid kit available on the rig location?
-
Are the service rig guy wires flagged?
-
Is the fall lane of the derrick clear?
-
Are vehicles out of the fall lane?
-
Is the overall housekeeping on the service rig satisfactory?
-
Are pipe racks and catwalks satisfactory?
-
Are fire hazards controlled?
-
Is the latitude and longitude board displayed on the service rig? Is it updated with current well location coordinates?
Guying
-
Are there wind guys?
-
Are the condition of the guy lines acceptable?
-
Is the diameter of the guy line correct per manufacturers recommendations?
-
Is there a minimum of three wire rope clamps on each guy wire?
-
Are the ground anchors in good condition and pull tested to 18,600 lbs. Is there a tag attached to the ground anchors?
-
Are the tubing board guys strung and crossed for racking?
-
Is there a minimum of three wire rope clamps on tubing guy wires?
-
Are the internal guys adjusted for tension?
Foundation
-
Is adequate supplemental flooring available?
Hand Tools
-
Are hand tools in good condition?
-
Are hand tools clean condition?
-
Are hand tools properly stored away?
Mast & Derrick
-
Is the manufacturers specifications plate on the Derrick?
-
Is the mast/ derrick free of excess corrosion and damage?
-
Is the ladder in good condition?
-
Is the racking platform walk around in satisfactory condition?
-
Is the rod basket in good working order?
-
Is the crows nest in good working order?
-
Is the manual latch dog extension and retraction mechanism satisfactory?
-
Are the latch dogs satisfactory?
-
Is the scoping ram stabilizer in good working order?
-
Are the crown sheave guards in good working order?
-
Is the finger board safety cable operational?
-
Are the hinge points free of cracks and signs of metal failure?
-
Are the derrick locking pins in place?
-
Are hinge point dowel pins provided with a safety retainer?
-
Is the derrick hydraulic system free of leaks?
-
Is there a lighting system on the service rig?
-
Is the hydraulic raising cylinder free of purging air?
Vehicles
-
Is the vehicle glass and mirrors intact and free of cracks?
-
Are the road gear, lights and reflectors intact and in working order?
-
Is the cab free of clutter?
-
Is the doghouse free of housekeeping issues?
-
Is the stove condition acceptable?
-
Are the lights in the doghouse free of hazards?
-
Are the hitch and safety chains free of defects?
-
Are flammable liquid storage cans satisfactory?
Carrier
-
Are handrails in place on elevated walkways and steps?
-
Are the headlights, taillights and signal lights working properly?
-
Are the wheels chocked?
-
Are the tires and wheels in good working order? Are they free from cuts, gouges. Is the wheel showing any defects?
-
Are the fuel tanks labeled?
-
Is the carrier free of any leaking fuel?
-
Is the cab free of flammable materials?
-
Are the glass and mirrors intact and free of cracks?
-
Do the windshield wipers operate correctly?
-
Are the hydraulic leveling jacks secured by mechanical lock nuts?
Drawworks Condition
-
Are the draw works free of guarding hazards?
-
Is the tubing line and sandline free of defects? Is there any kinking or crushing on the wire rope?
-
Is there sufficient wraps left on the drum with the blocks in the down position?
-
Is the dead line anchor retainer free of defects?
-
Is the road gear lockout satisfactory?
-
Is the handling winch satisfactory,
Operator Station/Work Platform/Floor
-
Are all operator controls labeled?
-
Is the work floor free of hazards(i.e slip, trip and fall)?
-
Are the steps and handrails in place?
Tools and Equipment
-
Is the the safety gate on the tongs satisfactory?
-
Is the backup satisfactory?
-
Is the stiff arm and snub line satisfactory?
-
Are the head guards in good condition?
-
Are the hoses and fittings securely connected and free of defects?
-
Is the tong in good working order?
-
Are the traveling blocks in good condition and free of defects?
-
Are the sheave guards in good working order?
-
Are the bales/links free of defects?
-
Are the elevators operational and in good working order?
-
Is the rod hook operational and free of defects?
-
Are the transfer elevators free of defects?
-
Is the standpipe secure on the mud circulating system?
-
Is the rotary hose secured to the gooseneck and swivel with safety hobbles?
-
Is there high pressure fittings in the high pressure system?
-
Is there safety pressure relief valves?
-
Is the discharge line from the relief valves anchored?
-
Is there any machine guarding hazards with the pumps?
-
Are the mud pit/tank walkways free of tripping hazards?
-
Is the mud mixing area satisfactory?
-
Are the BOP's installed, tested and functional?
Safety Equipment
-
Is there a safety harness and restraint lanyard provided at the tubing board, rod basket and stabbing board?
-
Is the derrick ladder climbing device operational and free of hazards?
-
Is there an emergency derrick escape equipment on the service rig or nearby? Is it operational and easily accessible?
-
Is there 2 - 20 lb Class A, B, C Extinguishers on the service rig? Are they charged and free of defects?
-
Is PPE being worn by the service rig crew?
-
Is PPE being worn by contractors on location?
-
Is the self retracting lifeline in good working order and free of defects?
-
What is the serial # on the self retracting lifeline? <br>
-
SRL Information
-
What is the model #, lot # on the fall protection harnesses that were inspected?
-
Fall Protection Harness Information
-
Notes
-
Note Pictures
Safety Specialist
-
Safety Specialist