DBC: Demo Prep--Completion

• Prepared by:

• Conducted on:

  Date

• Job Code:

• Client Name:

• Location
  Address

• Project Description:

• Photo of Location:

  Media

• Confirm any special floor/wall/dust protection needed with project leader

• Confirm size of job to determine floor/dust protection quantity

Equipment for All Jobs

• Plastic sheathing (dust barrier)

• Zip-Wall system (ensure you have at least 4 poles)

• Ram Board/Rosin Paper/Blue Plastic Floor Covering

• 2 Trash Barrels

• Vacuum (check filter and clean)

• At least 10 construction trash bags

• 4 Rolls of blue tape

• 2 Rolls of Ram tape (if necessary)

• 2 Drop Clothes

• Shark bites and wire caps (at least 2 of various sizes)

• 2 Non-slip drop clothes (if necessary)

• 2 Pry bars

• Personal Tools

• Sawzall w/ extra blades

• Oscilating Multi-tool (Fein Tool)

• Sledge Hammer

• Angle grinder (check blade)

Specialty Demo Equipment

• Hammer Drill

• Large Breaker Bar

• Skillsaw w/ Diamond Blade

• Ensure all floor/wall/dust protection has been installed

• Establish debris removal plan/collection site

• Ensure proper safety equipment/details have been identified. (fire extinguisher within 100', evac route defined, first aid kit near work area)

• Ensure all personal are wearing the proper PPE for the job

• Ensure Safety Huddle for demo has been completed

• Re-confirm any vent and drain pipes/chases/wires that have been identified in the pre-job walk are marked for demo purposes

• Identify any fixtures/appliances to-be-saved

• Inspect opposite side of walls demo is take place on. Make sure all pictures/fragile objects have been moved.

• Locate and shut-off all necessary water lines

• Locate and shut-off all breakers in work area (if necessary)

• Disconnect and remove all fixtures/appliances

• Initiate demolition

• Ensure all debris has been removed and made it to collection site

• Inspect sub-floor for any water/rot/termite damage that could potentially cause injury. Mark area clearly

• Ensure all water lines have been capped and do not leak when water is turned on

• Label all wires and plumbing lines by use and breaker number/location.

• Ensure all electrical wires have been capped

• Check all surrounding areas for damage that may have occurred (floors/walls/furniture etc.)

• Inspect surrounding areas for any potential water leaking or damaged caused during demolition

• Mark any damaged wires for electrician

• Mark any damaged water feeds for plumber