DTJ GA2 MEWP

1. Is the operator trained to operate this MEWP and does the operator have a valid operators license/card?

2. Operating and emergency controls are in proper working condition, including EMO button or Emergency Stop Device

3. MEWP includes a separate control which shall be continuously activated by the operator for upper directional controls to be operational.

4. Emergency Lowering function operates properly

5. Lower operating controls successfully override the upper controls.

6. Both upper and lower controls are adequately protected from inadvertent operation.

7. Control panel is clean & all buttons/switches are clearly visible (no paint over spray, etc.).

8. All switch & mechanical guards are in good condition and properly installed.

9. All Safety Indicator lights work.

10. MEWP controls are secured in their home position and function properly & accurately labeled (up, down, right, left, forward, back).

11. Motion alarms are functional.

12. Safety decals are in place and readable.

13. All guard rails are sound and in place, including basket chains. Fall protection anchorage points are clearly marked for MEWPs.

14. Work platform & extension slides are clean, dry, & clear of debris.

15. Work platform extension slides in and out freely with safety locking pins in place to lock setting on models with extension platforms.

16. Inspect for defects such as cracked welds, fuel leaks, hydraulic leaks, damaged control cables or wire harness, etc.

17. Tires and wheels are in good condition, with adequate air pressure if pneumatic

18. Braking devices are operating properly.

19. Check fluid levels (fuel, hydraulic, etc.).

20. For battery operated MEWP’s, charging sockets and plugs are complete and in good condition.

21. The manufacturer’s operations manual is stored on MEWP (in all languages of the operators).