Information

  • Insert Property Address:

  • Client / Site

  • Conducted on

  • Prepared by

  • Personnel

Installation Form

INSTALLATION FORM:

  • The details below must be true and accurate - This form will be used as part of the application process to the client.
    These MUST be sent in to the office on a daily basis.

  • Client:

  • If Other:

  • Installation Address:

  • Installation Date/Time:

  • DESCRIPTION OF WORKS COMPLETED:

  • Installation of DPI Switch (Via Meter Plus):

  • Renew Distribution Board:

  • Description of Mains Tails (i.e. 25mm &16mm earth at 3m):

  • Electrical Upgrade: (Add Quantities)

  • KITCHEN:

  • Double switched sockets:

  • Switched fused spurs: (Please pick multiples)

  • Single switched sockets:

  • Cooker Switch & Outlet:

  • Fluorescent Light:

  • BATHROOM:

  • Shower & 45amp Pull Switch:

  • 2D Light Fitting & Pull Switch

  • Shaver Point:

  • MISCELLANEOUS:

  • 230v Mains Interlinked Smoke Detectors:

  • 230v Mains Carbon Monoxide Detector Interlinked with Smoke Detectors:

  • Upgrade Single Socket To Double Converters:

  • Installation of Wireless Doorbell:

  • EXTRACTION:

  • Installation of Kitchen Fan:

  • Installation of Bathroom Fan:

  • Installation of Positive Vent Unit:

  • 4" Core Hole:

  • 6" Core Hole:

  • Tumble Dryer Vent:

  • Replace Positive Vent Filter:

  • Service Positive Vent Unit:

  • ADDITIONAL ITEMS:

  • Additional Pendants Changed:

  • Additional Light Switches Changed:

  • Additional Double Sockets Changed:

  • YT2 Trunking Quantity Per Meter:

  • YT4 Trunking Quantity Per Meter:

  • 50mm x 50mm Trunking Quantity Per Meter:

  • INSERT ANY WORKS COMPLETED WHICH AREN'T LISTED ABOVE:

  • Please Add Descriptions And Quantities:

  • Please Sign:

  • NOW YOU HAVE COMPLETED THE INSTALLATION FORM PLEASE MOVE ON TO THE QUALITY ASSURANCE FORM.

Quality Assurance Form

QUALITY ASSURANCE FORM:

  • ALL DETAILS BELOW MUST BE COMPLETED IN FULL AND ACCURATELY:

  • DISTRIBUTION:

  • DPI Switch Installed @ Incoming Supply:

  • Water and Gas Bonds Accessible and on view (Gas bond fitted to pipe work before 1st branch - 10mm Installed);

  • Blanks in Fuseboard Present -No Access to Live Parts:

  • Corsan 'Next Test' and 'Caution' Multi Colour stickers applied to Fuseboard:

  • RCD Protection installed on EVERY Ciruit:

  • Trunking Installed on all cables at the Fuseboard (No cables on show):

  • KITCHEN:

  • All Sockets Level and Secure:

  • All Safety Shields Remove:

  • Earth Sleeving Installed:

  • Fluorescent Light Fitting Installed:

  • Boiler Flex Installed Under The Tiles:

  • Accessories separate from other services -Min 150mm:

  • Correct Engraved Switched Fused Spurs Installed:

  • Engraved Jointed Blanking Plates Installed (Plates without Identification are NOT Permitted):

  • Tumble Dryer Vent fitted secure and level - Ducting installed Correctly:

  • BATHROOM:

  • IP Rated Light Fitting Installed:

  • Shower Installed Correctly - 45amp Pull Switch mounted away from Light Pull Switch:

  • 12v Extractor Fan Installed and Tested - Blades free of Ducting:

  • External Grill Fitted Secure and Level:

  • HEATING:

  • Programmer and Roomstat Secure and Level:

  • 3amp Fuse Installed in Switched Fuse Spur:

  • MISCELLANEOUS:

  • Trunking Secure and Level - Manufactured Bends Installed:

  • Cables in Loft Space Clipped and Secure - Neat and Tidy:

  • Positive Vent Unit Tested and Fully Functional:

  • Smoke Detectors & CO2 Detectors Interconnected - Smoke and CO2 Tests Carried Out with Artificial Spray:

  • Please Sign:

  • NOW YOU HAVE COMPLETED THE QUALITY ASSURANCE FORM PLEASE MOVE ON TO THE PART-P NOTIFICATION FORM.

Part P Notification Form

PART P NOTIFICATION

  • THIS MUST BE COMPLETED IN ALL CASES

  • 17th Edition BS 7671 Compliance

  • IT IS ESSENTIAL THAT THE ITEMS BELOW HAVE BEEN COMPLETED TO COMPLY WITH REGULATIONS

  • Main Incoming Earth adequate (Insert Correct Cable Size):

  • Main Water Bond adequate (Insert Correct Cable Size):

  • Main Gas Bond adequate (Insert Correct Cable Size):

  • New Installation (New Build):

  • Replacement Consumer Unit:

  • One or More New Circuits:

  • Rewire of All Circuits:

  • Partial Rewire:

  • Lighting / Power Outdoors:

  • Electric Floor or Central Heating System:

  • Control Wiring Including Fire/Security/Heating/Cooling/Ventilation Systems:

  • Upgrade or Alterations to Means of Earthing:

  • Installation /Alteration of a Generator / Solar Voltaic System:

  • ELV Lighting within the Building:

  • DETAILS OF WORK:

  • Please select one of the areas in which the work was carried out:

  • Please enter the BS 7671 Installation Certificate Reference Number for this job (if available):

  • BS 7671 Certificate Number:

  • NOW YOU HAVE COMPLETED THE PART P NOTIFICATION FORM PLEASE MOVE ON TO THE CUSTOMER SATISFACTION FORM.

Customer Satisfaction Form

CUSTOMER SATISFACTION FORM

  • To be completed with the tenant present:

  • Did The Engineer Arrive On Time?

  • Was The Engineer Polite And Helpful?

  • Was The Engineer Smart And Presentable?

  • Was The Job Completed To A Satisfactory Level?

  • Did The Engineer Clean Away All Debris?

  • Is Your Fridge/Freezer Plugged In And Working?

  • Please Rate The Level Of Service You Received From Start To Finish:

  • Please Note Any Additional Comments That You Feel May Improve Our Service:

  • CUSTOMER DETAILS:

  • Customer Name:

  • Address:

  • Please Sign Below:
    Please Confirm The Fridge/Freezer Have Been Reconnected And Are Fully Functional -Corsan (Northern) Ltd Take NO Responsibility For The Fridge/Freezer.
    In The Absence Of The Occupant The Installing Engineer And The Supervisor Must Confirm The Fridge /Freezer Are Connected And Working.

  • Customer:

  • Supervisor:

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.