Information

  • THIS SITE HAS BEEN RATED:

  • Job Name

  • Job Number

  • Conducted on

  • Safety Person Conducting Audit

  • Location
  • Personnel Participating

ADMINISTRATIVE

  • INCIDENT AND INJURY FREE (IIF)

  • Does the Job have an IIF or "Why I'm Safe" board?

  • How many co-workers on site including Subs?

  • What percentage of project coworkers have attended the 4hr IIF Orientation?

  • Have this project reported any incident this Week?

  • Have the First Aid Logs / First Report of Injury been sent to Safety department?

  • Date and time the First Aid Log / First Report of Injury will be send to Safety Department

SUPERVISION INVOLVEMENT

  • Conduct a Job site safety survey?

  • Attend or conduct a tool box talk safety meeting?

  • Lead or participate in morning stretch and flex?

STRETCH & FLEX

  • Are Stretch and Flex posters located in stretching areas? (Available from Safety)?

  • Are Coworkers following the Baker Stretch & Flex program (at a minimum)?

  • Is enough time devoted to each stretch?

  • Do the PE / PM / Super / Gen. Super participate?

MTA's

  • Are MTA's conducted and documented for each crew?

  • Does it contain an adequate description of the work being performed?

  • Is there a history of completed MTA's for each crew? (check last 7 days)

  • Does the project team properly store & track MTA documents?

  • Are Safety hazards thoroughly addressed along with controls the hazards on the form?

TOOLBOX TALKS

  • Are toolbox meetings being conducted and documented?

  • Is a toolbox talk completed every week?

  • Is the topic applicable to our work?

FIRST AID / INJURY CARE / HEALTH

  • Are CPR & First Aid certified coworkers on the project?

  • Is a well stocked First Aid kit available?

  • Is the Incident Reporting Procedure posted in the office or elsewhere?

  • Are required posters (OSHA job safety and health protection poster displayed in a prominent location?)

  • Are emergency telephone numbers posted?

  • Is there adequate eye wash immediately available at working areas

  • Is Neutrality available to neutralize wet concrete that may have contacted a coworker skin?

  • Is drinking water readily available?

  • Are water kegs cleaned regularly and labeled?

  • Are drinking cups provided and properly disposed of?

  • Are toilets clean & properly stocked with paper?

  • Are any Carbon monoxide hazard in our work areas?

PERSONAL PROTECTIVE EQUIPMENT (PPE) & WORK WEAR

  • Are all coworkers wearing hardhats, and eye protection?

  • Are co-workers wearing face-shield or special eye protection (burning goggles) where required?

  • Are co-workers wearing high visibility work wear and / or vest where they are required?

  • Are coworkers wearing proper work clothing and work boots?

  • Are coworkers wearing hearing protection where they are required?

  • Are co-workers wearing appropriate gloves for the task?

  • Are co-workers wearing respirators when grinding or working on a dusty environment?

  • Did coworkers inspect their PPE prior to the start of their shift?

PERSONAL FALL ARREST SYSTEM (FALL PROTECTION)

  • Have the coworkers exposed to an immediate fall hazard?

  • Date and Time of Abatement

  • Picture of Abatement

  • Are there any open edge left unprotected?

  • Date and Time of Abatement

  • Picture of Abatement

  • Are all holes (2" & larger) securely covered & marked?

  • Date and Time of Abatement

  • Picture of Abatement

  • Are warning signs posted at leading edge barriers? (Available from Safety)

  • Date and Time of Abatement

  • Picture of Abatement

  • Is the Miler edge being used correctly?

  • Are coworkers at the leading edge adequately protected?

  • STOP THE ACTIVITY AND CORRECT IT INMEDIATELLY!!

  • Are Horizontal lifelines being installed, inspected & used correctly?

  • Are proper tie-off points used?

  • How you corrected?

  • Correction Pictures

  • Are coworkers exposed to swing fall hazard?

  • How you corrected?

  • Correction Pictures

  • Are all components of Personal Fall Arrest System (harness, SRLs, anchorage) in good condition?

  • Do you replaced the damaged equipment?

  • When it will be replaced?

  • Picture of replaced equipment

  • Are dual SRL (twin turbo, Diablo) properly connected to harnesses (if used)?

  • Picture of Corrected issue

  • Are coworkers trained for the fall protection system in use?

  • STOP!! CALL CYNDIE AND SET UP A TRAINING DATE

  • Date of training

  • Are damage / defective fall protection components tagged and removed from service?

  • TAG AND REMOVE IT FROM SERVICE INMEDIATELY

  • Picture of the damage equipment tagged

  • Are the guardrails properly built to Baker Engineering standards (top-rail, mid-rail and toe-board)

  • Date and Time of Abatement

  • Picture of Abatement

  • Are wooden 2x4 stanchions no greater than 8ft apart?

  • Corrective Pictures

  • Are cable handrails flagged every 6ft with high visibility material?

  • Corrective Pictures

HAND & POWER TOOLS

  • Are all hand and power tools maintained in a safe condition & inspected before each use?

  • Are the unsafe tools tagged and removed from service

  • Why not? Explain

  • Picture of the unsafe tool

  • Are all electric power tools grounded or double insulated?

  • It was tagged and removed from service?

  • Are power cords in good condition with ground pin (when required)?

  • TAG IT AND REMOVE IT FROM SERVICE OR HAVE IT FIXED

  • Picture of the TAGGED or fixed cord

  • Are pneumatic power tools secured to the hose by clip, wire or whip check?

  • STOP AND HAVE IT FIXED

  • Picture of the fixed tool

  • Are all tools properly equipped with the guards or safety features they were designed to have?

  • Is the guard re-placed or otherwise tagged and removed from service?

  • Why not? Explain

  • Picture of the tool with guard

  • Are the right tools used for the right task?

  • If used, are coworkers trained to operate powder Actuated tools?

ELECTRICAL (OTHER THAN TOOLS)

  • Are GFCI's provided for all temporary power sources?

  • Are GFCI's regularly inspected & in good repair?

  • Have damaged / defective unsafe hand or power tool been tagged and removed from service?

  • TAG THE TOOL AND REMOVE IT FROM SERVICE

  • Picture of the gaged tool

  • Are electrical panels properly labeled & fully enclosed?

  • Are generators properly grounded?

CHEMICAL & FIRE HAZARD

  • Has this job performed a GHS / chemical safety refresher training?

  • Date and Time of Planned Training

  • Are Safety Data Sheets (SDS) available for ALL chemicals on site?

  • CONTACT SAFETY DEPARTMENT TO GET YOURS

  • Are ALL chemicals containers (fuel cans, spray cans, spray bottles, buckets, etc.)) labeled?

  • CONTACT SAFETY DEPARTMENT TO GET YOURS

  • Is fuel stored only in approved safety cans?

  • Are bulk fuel tanks protected from vehicular traffic?

  • Is a fire extinguisher located 25 to 75ft. from bulk storage tanks?

  • Are "NO SMOKING" signs posted in fuel storage areas?

  • Is there a fire extinguisher provided for each 3,000 square feet of building area?

  • Is there a fire extinguisher within 100ft of all work areas?

  • Is a spill kit available to address chemical spills?

  • Are fire extinguishers provided at or near fuel powered equipment?

  • Do fuel cans have flame arrest screens & self-closing lids?

  • Are compressed gases properly stored?

RIGGING & SIGNALING - Supplement C

  • Are only Baker coworkers or NCCO Trained coworker allowed to rig loads & signal cranes?

  • Are Subcontractors personnel properly trained?

  • Are riggers / Signal persons properly identified (hard hat stripes and / or vest?

  • Are whistles used to alert others when hoisting / landing loads ?

  • Are tag lines properly attached & used to control loads?

  • Are coworkers keeping their hands free of rigging & loads while hoisting?

  • Is rigging inspected before use?

  • Is there a current documented annual inspection for each chain sling on site?

  • Are chain slings tagged & in proper condition?

  • Are nylon slings tagged & in proper condition?

  • Are wire rope slings tagged & in proper condition?

  • Are damaged / defective rigging components removed from service?

  • Are proper rigging procedures in use for all observed lifts?

  • Are formwork rigging accessories (clamps, shake-out pins, shackles, hooks) used propperly?

  • Is the shackles moussed or bolt type used in permanent connections?

CRANE OPERATIONS

  • Is the annual inspection current?

  • Are daily inspections documented?

  • Is the operator certified (NCCO). Are the operator's qualifications readily available?

  • Is the operator's manual and load chart in the crane?

  • Is regular maintenance of the crane being performed?

  • Are approved voice commands & hand signals being used?

  • Are two way radios used to communicate with the operator?

  • Does each crane have a dedicated radio channel?

  • Are cranes located a safe distance from power lines?

  • Are weather conditions adequate for hoisting?

  • Is safe access provided for the tower crane operator?

  • Mobile: Has the GC ensured that the ground (on which the crane will operate) is sufficiently firm and level?

  • Mobile: Has the GC provided the location of hazards beneath the crane set-up area?

  • Mobile: If outriggers are used, are they fully extended and on a level surface

  • Mobile: is proper cribbing or matting used?

  • Mobile: Is the swing radius of the crane barricaded?

WALLS

  • Are the wall rack tie off points with retractable on it or fully guardrailed?

  • Date and Time of Abatement

  • Picture of Abatement

  • Is there clear access to the wall racks?

  • Abatement Date and Time

  • Abatement Pictures

  • Are the walls placed on a firm surface?

  • Are walls placed evenly on the racks?

  • Are Ladders being provided and secured on top and bottom?

  • PROVIDE A LADDER

  • Pictures of the provided Ladder

  • Are wall forms secured to the storage racks to prevent tipping?

  • HAVE THE WALL FORMS SECURED

  • Pictures of the secured Wall Form

RESPIRATORY HAZARD

  • Are coworkers adequately protected when performing activities known to generate silica dust (chipping, grinding, cutting concrete?

  • Are there procedures to control silica dust during sweeping activities?

COWORKERS WEARING RESPIRATORS

  • Does each coworker have a current medical clearance (within 2 calendar years)?

  • Is there documentation of respirator training?

  • Is the fit test current (within 1 calendar year)?

  • Are respirator kept in a sanitary condition?

  • Are coworkers following facial hair guidelines?

SCAFFOLDS

  • Have coworkers received documented scaffold training

  • Have Scaffolds been inspected & tagged by a competent Person?

  • Are scaffolds set on firm, secure footings with base plates and mud sills?

  • Are casters (on rolling scaffolds) locked when scaffold is occupied?

  • Are scaffold components inspected & in good condition?

  • Have damaged / defective components been removed from service?

  • Is the scaffold properly assembled?

  • Are working platforms fully planked?

  • Are wallkboards properly overlapped or secured with cleats?

  • Are platforms free of excessive tools, material and debris?

  • Are scaffolds adequately supported (when height -to-base width ratio > 4:1)?

  • Is proper access provided to the working platform?

LADDERS & STAIRWAYS

  • Are ladders in good condition?

  • REMOVE IT FROM SERVICE

  • Pictures of the removed Ladder

  • Are manufacturer's labels affixed & legible?

  • Are job build ladders properly constructed?

  • REMOVIT FORM SEVICE AND ORDER ONE FROM THE YARD

  • Pictures of the new Ladder from the Yard

  • Are coworkers climbing ladders properly?

  • Do side rails of ladders extend 36" above landings?

  • Is the ladder placed at a proper angle (4:1 ratio)?

  • Are ladders properly secured top and bottom?

  • Are ropes provided to move material without carrying up/down ladder?

  • Is clear access provided at top & bottom of access ladder?

  • Are two ladders provided when 25+ coworkers are on elevated decks?

  • Have damaged / defective ladders or components been removed from service?

  • REMOVE IT FROM SERVICE OR HAVE IT FIXED

  • Pictures of the removed or fixed Ladder

STAIRWAYS

  • Are sides & edges of stairways protected by a guardrails system?

  • Are rails in place on any stairways with more than 4 risers?

  • Are slab openings at stairways protected by toe boards?

  • Are stairs clean & unobstructed?

  • If temporarily closed, are stairs adequately barricaded with signage?

FRAMING / FORMING

  • Are formwork drawing available on site?

  • Are elevated decks inspected by a qualified person?

  • Are coworkers trained to work with these form system?

  • Are nonessential coworkers / other trades prevented from walking beneath the leading edge of decks under construction?

  • Are coworkers aware of pinch points & hand hazards associated with these systems?

  • Are overhead materials (plywood, panels) left unsupported?

  • Are props and / or frames plumb & set on a firm surface capable of supporting the intended load?

  • Are braces properly installed?

  • Have damaged / defective forms been removed from service?

  • Are coworkers manually moving materials following framing / forming procedures?

STRIPPING FORMWORK / RESHORING

  • Has concrete reached sufficient strength for stripping?

  • Is the stripping area barricaded and with signage?

  • Is stripped material lowered safely or allowed to "free fall?

  • Is stripped material kept clear of walkways & egress routes?

  • Are protruding nails pulled or bend over?

HOUSEKEEPING (PREVENTING SLIP, TRIP & FALLS)

  • Is there adequate lightning in all walkways & work areas?

  • Is task lighting adequate?

  • Are all aisle -ways and emergency routes clear of materials and debris?

  • Are material storage areas orderly & navigable?

  • Are there receptacles for lunch trash?

  • Are Caution & Danger tape barricades removed when they are no longer needed?

  • Is all exposed rebar caped to protected coworkers from injury,

SKIP PANS, TRASH BOXES, OUTRIGGERS

  • Are skip pans / trash boxes equipped with proper rigging that is tagged (or stamped with rated capacity) and in good condition)?

  • REMOVE IT FROM SERVICE INMEDIATELLY

  • Is there a visible load rating on each skip pan / trash box?

  • Are skip pans / trash boxes free of damage (no broken welds)?

  • REMOVE IT FROM SERVICE INMEDIATELLY

  • Is material not stacked beyond the sides of skip pans / trash boxes?<br>

  • Are outriggers installed per Baker Engineering requirements?

  • Are removable handrails installed at the slab edge to prevent coworker fall exposure when outrigger doors are open?

  • Are self-retracting lifelines installed to allow coworkers to “tie off” when working on outriggers?

  • Are Outrigger Warning Signs installed to remind coworkers of fall hazards & outrigger capacity?

  • Is pre-tied rebar area kept organized and clean (no excess of tie-wire on the floor)

HEAVY EQUIPMENT & TRUCKING

  • Are seat belts being used by operators?

  • Are other coworkers prohibited from ridding on equipment?

  • Does equipment have a functional back up alarm?

  • Are the operators driving equipment at a safe speed?

  • Is the operator qualified / certified?

  • Has a documented daily inspection of the equipment been performed?

  • Is the parking brake set and all forks / buckets lowered to ground when equipment is not in use?

  • Does the equipment have fire extinguishers and required manufacturer labels?

  • Are coworkers using safe means to access flat bed trailers?

  • Are spotters used to assist backing concrete trucks?

  • Are trained flagman used to control traffic during deliveries?

  • Are the mud flaps present and in good conditions?

  • TX DOT Insurance, Inspection Decal, and Certificate present

  • Is the load secure?

  • Are the straps in good working condition?

  • Height / wide load clearance meet DOT requirements?

  • Are the lights, horn, flashers and brakes working?

  • Is the insurance card current?

  • Accident kit (accident form, camera) present in the truck?

  • Is a fire extinguisher available and charged?

Office Trailer

  • Are office trailers clean and organized?

  • being all wasted bins emptied?

  • Are electrical panels secured and safe?

  • If generator is in used it is a safe distance and have a fire extinguisher within 25'?

  • SCORING
    A = Compliant or 95 - -100%
    B = Positive effort or 85 - 94 %
    C = Average effort or 75 - 84%
    D = Serious or 0 - 74%

  • This audit reflects the condition of the job-site at the time of inspection and limited by the portion of the site that was inspected.

  • Superintendent's Name

  • Personnel Present

  • Safety Officer

  • "COMMITTED TO CREATING A HEALTHY LIFE, FREE OF INJURY, FOR ALL CO- WORKERS"

  • "TOMORROW IS YOUR REWARD FOR WORKING SAFELY TODAY"

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.