Information

  • THIS SITE HAS BEEN RATED:

  • Document No.

  • Job #

  • Job Name

  • Conducted on

  • Prepared by

  • Location
  • Personnel

Incident and Injury Free (IIF)

  • Is the IIF board posted and updated?

  • Percentage of co-workers gone through IIF orientation

  • Have this project reported any incident this month?

  • SUPERVISION INVOLVEMENT

  • Attend to the MTA's?

  • Conduct a Job site safety survey?

  • Attend or conduct a tool box talk safety meeting?

  • Lead or participate in morning stretch and flex?

OSHA and Baker Concrete Construction, Inc. General Requirements and Posting

  • Is the OSHA 300 A log posted?

  • Is a well stocked first aid cabinet on site and inspected weekly?

  • Is the first aid log posted on the cabinet?

  • There is adequate eyewash available in the immediate work area.

  • Is incident reporting procedure posted?

  • Is the 5-in-1 poster & emergency action plan posted?

  • Are toolbox meetings being conducted and documented?

  • Are MTA's conducted and documented?

  • Are First Aid / CPR trained co-worker on site?

Personal Protective Equipment (PPE)

  • Are all coworkers wearing hardhats, and eye protection?

  • Are coworkers wearing ear plugs where they are required?

  • Are co-workers wearing face-shield when shipping, blowing the deck or cutting steel?

  • Are co-workers wearing traffic vest where they are requirred?

  • Are co-workers wearing appropriate gloves for the task?

  • Are co-workers wearing respirators when graining or working on a dusty environment?

  • Are coworkers wearing proper clothing and work boots?

  • Do coworkers have tarsal guards on during required tasks?

  • Did coworkers inspect PPE prior to the start of their shift?

Personal Fall Arrest System (Fall Protection)

  • Are coworkers using these system when required?

  • Have the coworkers been trained in the use of these system and using system correctly?

  • Is the equipment installed correctly and in good condition?

  • Are proper tie-off points used?

  • Are the guardrails properly built (top-rail, mid-rail and toe-board)

Sanitation

  • Are toilet facilities adequate and reasonably clean?

  • Are disposable water cups available?

  • Are drinking cups placed into the trash containers and the trash containers located next to all water cans?

  • Are water containers cleaned and clearly marked of the contents and dated?

Fire Protection

  • Have coworkers been trained in the use of fire extinguishers?

  • Are extinguishers inspections current and extinguishers are in good working order?

  • Is there a fire extinguisher within100 feet of all work areas?

  • Do fuel cans have flame-arrester screen and self closing lid?

  • Is a fire extinguisher located 25 to 75 feet from outside storage tanks and the storage tank(s) grounded?

  • Are adequate "NO SMOKING" signs provided in fuel storage areas?

  • Are portable storage containers properly marked?

Signs and Barricades

  • Are signs and barricades used to protect the public from job hazards?

  • Are stripping signage and barricades adequate?

  • Are leading edge signage in use when needed?

  • Are coworkers trained in the difference between caution and danger tape?

  • Is caution and danger tape being used properly and removed when not needed?

House Keeping, Material Handling, and Rigging

  • Are all aisle-ways and emergency routes clear of materials and debris?

  • Is there a clear access around work areas?

  • Are storage material near guardrails or leading edge?

  • Are nails removed from scrap lumber?

  • Are materials on upper floors secured to prevent displacement?

  • Are the ladders provided with rope to create a means to move materials without carrying them on the ladder?

  • Is picking eye available and used on forklift?

  • Is rigging inspected daily and in good condition when in use?

  • Are nylon straps free from cuts, frayes, or damage?

  • Do wire ropes have legible tags and free from damage? (Not kinked, crushed or bird caged) ?

  • Are whistles being used when flying material overhead?

Tools

  • Are the Generators, Skill Saws, Drills, etc. in good working conditions?

  • Are the hydraulic cylinder on the gang box in good working order?<br>

  • Are the hinges and/or locking pins present on the engineer's boxes?

  • Are tools requiring guards equipped and in good working order?

  • Are accessory handles present on drills, grinders?

  • Are carpenters using two hands on saw?

  • Are electrical cords in good condition?

  • Are the data plate on tools legible?

  • Are tools being inspected and used properly for the task?

  • Are hoses on the air compressor secured?

  • Has the saw depth been checked prior to cutting?

  • Are coworkers trained to operate powder actuated tools?

Electrical

  • Are GFCIs being inspected on a weekly basis and in good working order?

  • Are temporary lights properly suspended?

  • Are all electrical boxes, cords, receptacles, breakers, etc. being used for their intended use per NFPA, NEC, OSHA and their UL rating?

  • Are cords running from boxes protected from cutting or pulling from box?

  • Are extension cords being inspected daily?

  • Are ground pin present on tools?

  • Generator placement In/Out building-CO can go out?

Ladders

  • Are the spreaders on the step ladders locked?

  • Are ladders inspected and in good condition with all required labels?

  • Do side rails extend 36 inches above landings or ladder extensions installed?

  • Are extension or job made ladders tied off or is an coworker holding the ladder?

  • Are doorways barricades when ladders are set in from of them and a clear access/egress to the ladder?

  • Are coworkers using ladders properly?

  • Are the ladders clear of debris/material on top and bottom?

  • Are job made ladder built properly (no double-headed nails)?

  • Is the ladder placed at the proper angle (1-4)?

  • Are double ladder or 2nd ladder when 25 + co-workers on deck?

  • Are the manufacturer's labels affixed and legible?

Excavations

  • Are coworkers protected from falling into pier or similar holes?

  • Is the competent person present?

  • Are excavations that are 5 feet or deeper in depth properly sloped, benched or shored?

  • Have provisions been made to control water accumulation?

  • Have excavations of 20 feet or more in depth been designed by a PE?

  • Is heavy equipment kept a safe distance from the edge and the spoil pile a minimum of 2' from the excavation?

  • Has proper access and egress been provided? (1 ladder every 25 coworker or every 25')

  • Are the utility locates less then 10 days old and clearly marked?

  • Is excavation properly barricaded and signs posted?

  • Are utility locates clearly communicated with backhoe operator or were they pot-holed to the depth?

  • Are under ground utilities protected while excavation is open?

Floor and Wall Openings, Stairways and Roofs

  • Do all holes (2" or more) or perimeters that are 6 feet or more above a lower level have guardrails or hole covers?

  • Are hole covers secured, marked "hole" or "cover" and capable of supporting intended loads?

  • Are coworkers protected from falling objects?

  • Are stacked materials kept at a safe distance from the toe boards?

  • Do guardrails and stair nails meet OSHA requirements?

  • Are steel stair pan treads filled?

  • Is proper fall protection provided when needed?

  • Are stairs and ladders properly constructed (no double-headed nails)?

  • Are guardrail cables flagged every 6' with high visibility material?

  • Is there access/egress for changes in elevation greater than 19" for walking working surfaces?

Structural

  • Is there proper access/egress on elevated decks?

  • Is there proper fire extinguishing equipment available?

  • Are all protruding vertical and horizontal rebar capped?

  • Is shoring and scaffolding installed properly and inspected before pour?

  • Is housekeeping on elevated deck in order?

Wall Panels Storage Area

  • Have the wall rack tie off points with retractable on it or fully guardrailed?

  • There is clear access to the wall racks?

  • Are the walls placed on a firm surface?

  • Are walls placed evenly on the racks?

  • Are Ladders being provided and secured on top and bottom?

  • Are wall forms secured to the storage racks?

Truck / Trailers

  • Are the mud flaps present and in good conditions?

  • TX DOT Insurance, Inspection Decal, Certificate present

  • Truck Cleanliness

  • Are the load secure?

  • Are the straps in good working condition?

  • Height / wide load clearance meet DOT requirements?

  • Are the lights, horn, flashers and brakes working?

  • Is the insurance card current?

  • Accident kit (accident form, camera) present in the truck?

  • Is a fire extinguisher available and charged?

Heavy Equipment

  • Are seat belts being used by operators?

  • Are riders not allowed on the equipment?

  • Does equipment have a functional back-up alarm?

  • Are the operators driving equipment at safe speeds?

  • Is the operator trained?

  • Has the equipment been inspected and in good working order?

  • Are picking eyes readily available for lifts?

  • Is equipment attended to while running?

  • Is parking brake set and all forks and buckets lowered to ground when equipment is not in use?

  • Does equipment have fire extinguishers and required manufacturer labels?

Welding and Cutting - Supplement A

  • Are all cylinders secured in an upright position?

  • Is proper eye protection being used?

  • Is there at least one 10 lb. extinguisher within 50 feet of oxygen and acetylene storage areas?

  • Are oxygen and acetylene bottles stored 20 feet apart?

  • Is there a fire watch for welding or cutting above combustible materials

  • Is cutting torch in good working order?

Scaffolds - Supplement B

  • Is fall protection provided for coworkers erecting or dismantling scaffold?

  • Are scaffold set on firm, secure footings with base plates and mud sills?

  • Are scaffolding components inspected and in good condition?

  • Has the scaffold been tied off every 25 feet in height (ties must be installed when the height of the scaffold is more than 4 times than the minimum base width)

  • Are scaffold boards properly overlapped and secured? (12")

  • Are rolling scaffolds moved correctly? (Not being surfed from platform)

  • Is fall protection and falling object protection provided?

  • Have coworkers been trained in the hazards associated with scaffolds and scaffold work?

  • Is the area below the scaffolding barricaded or toe-boards erected?

  • Have the scaffolding been inspected and tagged?

Cranes - Supplement C

  • Is the annual inspection current?

  • Are the daily inspections being conducted?

  • Is the operator's manual and load chart in the crane?

  • Has the crane received the proper routine maintenance?

  • Are operator's record of maintenance & crane company work-orders kept?

  • Does the LMI and Anti-Two block work?

  • Is there a fire extinguisher on the crane?

  • Is the crane cab free from window crack?

  • Is all rigging in good condition and inspected before each use?

  • If outriggers are used, are they on a level surface?

  • Is proper cribbing or matting used?

  • Is the entire swing radius barricaded?

  • Can the crane operator see the signal-person?

  • Are the ANSI approved hand signals being used?

  • Are two way radios being used to communicate with the opperator?

  • Have the cranes a dedicated chanel?

  • Are cranes located a safe distance from power lines?

  • Are chain sling inspected and documented (Monthly)?

  • Is the rigging appropriate for the lift?

  • Are tag-lines being used to control the load?

  • Is weather conditions adequate for lifts?

  • Is the crane appropriately sized?

  • Is there a copy of the crane operator's qualification on file?

Aerial Lifts - Supplement D

  • Are coworkers using proper fall protection?

  • Are coworkers remaining on the platform at all times?

  • Is the gate or chain closed when occupied?

  • Has the equipment been inspected prior to use?

  • Are lanyards / retractable attached to the proper anchorage points?

  • Are lifts set on level ground, per manufacture's recomendations?

  • Is operator trained?

  • Is the lifting capacity visible Nd appropriated for the task?

  • Are tools and materials secured from displacement?

Hazard Communication

  • Do the coworkers know the location of the master MSDS book?

  • Are MSDS sheets maintained on each product on site

  • Are MSDS labels on each chemical container that is unmarked?

  • Are coworkers properly trained on hazardous chemical present?

Office Trailer

  • Are office trailer clean and organized?

  • Have all wasted bins emptied?

  • Are electrical panels secured and safe?

  • If generator is used it is a safe distance and have a fire extinguisher within 25'?

  • SCORING
    A = Compliant or 95 - -100%
    B = Positive effort or 85 - 94 %
    C = Average effort or 75 - 84%
    D = Serious or 0 - 74%

  • This audit reflects the condition of the job-site at the time of inspection and limited by the portion of the site that was inspected.

  • Superintendent's Name

  • Personnel Present

  • Safety Officer

  • "COMMITTED TO CREATING A HEALTHY LIFE, FREE OF INJURY, FOR ALL CO- WORKERS"

  • "TOMORROW IS YOUR REWARD FOR WORKING SAFELY TODAY"

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.