Frame QA Checklist

• Inspection Type

• Job Number

• Lot Address

• Conducted on

  Date

• Site Manager / Framer

• Inspector

• Location
  Address

FIRST INSPECTION

• Did the job pass

  Yes

  No

  N/A

REINSPECTION

• Are all items complete

  Yes

  No

  N/A

• REINSPECTION CARRIED OUT BY

• Select date

  Date

LANDSCAPE VIEW

• Landscape view of all sides.

  Media

Site Safety

• Site safety correct?

  Yes

  No

  N/A

FRAME ITEMS

• Frame overhang at slab does not exceed10mm

  Yes

  No

  N/A

• Room dimensions/layout correct (+/- 10mm), rooms square.

  Yes

  No

  N/A

• Walls straight and plumb (+/- 4mm over 2.0m), ceiling height as per floor plan.

  Yes

  No

  N/A

• Top and bottom wall plates secure and straight with frame tie down complete as per engineering.

  Yes

  No

  N/A

• Bracing installed and secured in accordance with engineers detail ( PT Brace fitted with 16mm thread rod).

  Yes

  No

  N/A

• Engineered members installed as per engineering.

  Yes

  No

  N/A

• Studs placed under truss point loads (Crush plates under girder truss & load points, non compressing material).GT points in as per layout.

  Yes

  No

  N/A

• Blocking placed at joist level for point loads, all loads transferred down to the slab.

  Yes

  No

  N/A

• Wall junctions fixed with 200mm blocking at 800mm centres.

  Yes

  No

  N/A

• Nog's installed correctly

  Yes

  No

  N/A

• Nog's installed at 800mm either side of powder room vanity.

  Yes

  No

  N/A

• Bulkheads level and installed (+/- 4mm over 2.0m) level.

  Yes

  No

  N/A

• Columns plumb and square with no twist.

  Yes

  No

  N/A

• Hobs installed correct height and placement

  Yes

  No

  N/A

• All niches/plaster openings checked for placement and diamention.

  Yes

  No

  N/A

• Door openings correct width/height.

  Yes

  No

  N/A

• Window spacing / height correct as per floor plan.

  Yes

  No

  N/A

• Window / door frames secure & level with packers installed and nailed off with 65mm gal nails, three per side.

  Yes

  No

  N/A

• Window trimmers installed.

  Yes

  No

  N/A

• Horizontal window to kitchen at 905mm off floor.

  Yes

  No

  N/A

• Stiffening board installed under aluminium windows 1800mm and over

  Yes

  No

  N/A

• Window protection in place.

  Yes

  No

  N/A

• Flashings installed to sill section of timber windows and timber framed doors.

  Yes

  No

  N/A

• Trusses plumb / straight (max 50mm out of plumb and max 50mm bow in any chord). Free of damage?

  Yes

  No

  N/A

• Truss connections meeting accurately and flush to bottom chord.

  Yes

  No

  N/A

• Truss connections as per layout. Trusses point loaded on load bearing walls.

  Yes

  No

  N/A

• Truss lines straight?

  Yes

  No

  N/A

• Heater platform built correctly (1800 square) and in correct position. Platform built for roof tiles.

  Yes

  No

  N/A

• Change of direction nog's installed at direction change of roof trusses and where required (every second bay) Perimeter nog's approx 150mm off the wall on garage door edge and external wall of garage.

  Yes

  No

  N/A

• Roof access trimmers installed in correct position as per plan. (Check access for lower roof areas on double stories). R/A marked on floor.

  Yes

  No

  N/A

• Joists installed as per detail with blocking fitted correctly, voids clear and all penetrations clear of joists. Penetrations not compromising integrity of the joists.

  Yes

  No

  N/A

• RA 400mm wide. Joist blocked at top of shaft on double story?

  Yes

  No

  N/A

• Sheet flooring nailed off and not squeaking. Holes for ducting cut out.

  Yes

  No

  N/A

• Two holes installed to rim board where required to vent ceiling fan.

  Yes

  No

  N/A

• Shower wastes centred to shower base or within 150mm radius of centre of base.

  Yes

  No

  N/A

• Stair void dimensions as per plan with ground and first floor walls aligned.

  Yes

  No

  N/A

• Garage beam temporarily supported and nog's in place for garage door.

  Yes

  No

  N/A

• Eave overhang as per plan with valley boards and box gutters fully supported.

  Yes

  No

  N/A

• All debris / off cuts placed in rubbish cage. Left over timber stacked neatly in the garage. House swept out and clean.

  Yes

  No

  N/A

OTHER ITEMS

• Plumbing rough in complete at time of inspection?

  Yes

  No

  N/A

• Kitchen island waste and conduit in correct position.

  Yes

  No

  N/A

OVERALL GENERAL COMMENTS

• Any comments not covered by above categories

  Yes

  No

  N/A