Information

  • Candidate Name - HEO Field Exam - Backhoe

  • Document No.

  • Conducted on

  • Prepared by

  • Location
  • The performance verification is designed as one method to a evaluate job skills and safe work habits of a participant. The performance of the participant must be evaluated by a designated W.C. Spratt, Inc. evaluator at an authorized location. Candidates must have a minimum passing score of 90% to pass any field exam portion of the heavy equipment operator training program.

Employee Information

  • Employee name:

  • Employee number:

  • Employee photo:

Hydraulic Excavator Equipment Type (Make and Model):

  • From the manufacturers plate please obtain this information and enter here;

Operator Details

  • If an operator has no proof of training held on record, they must not operate until proof of training competency has been proven. (Classroom CAT Training and Successful Completion).

  • Has the operator had a valid certificate of training that has been passed or refreshed within the last three years?

  • Has the operator an up to date authorization to operate, signed and renewable annually?

  • Date of test or refresher course?

  • Photo of that certification:

Pre-start Inspection:

  • Did the operator verify all safety items are identified; such as the fire extinguisher, warning signs guards, etc:

  • Did the operator position barricades and appropriate warning signs?

  • Did the operator properly position the excavator for pre-start inspection?

  • Did the operator visibly verify the condition of the bucket?

  • Did the operator inspect the tires for damage?

  • Did the operator inspect the (ROPS) rollover protection system for obvious damage?

  • Did the operator complete the daily pre-operation check list? (This is done using the appropriate form within the iauditor suite).

Job Site Survey:

  • Did the operator identify potential site hazards such as but not limited; to high-voltage lines or underground utilities?

  • Did the operator identify and verify grade stakes?

  • Did the operator verify safety of equipment set-up

Start-up and Warm-up of Backhoe:

  • Did the operator successfully start the engine?

  • Did the operator check the engine gauges for proper readings?

  • Did the operator check all controls for proper function such as but not limited to; The bucket. lift and tilt, backhoe, and travel?

  • Did the operator properly document their findings on the required checklist?

Perform Basic Maneuvering Skills:

  • Did the operator position the backhoe as instructed for the exercise?

  • Did the operator travel the backhoe forward for at least 50 feet?

  • Did the operator travel the backhoe in reverse for at least 50 feet?

  • Did the operator accomplish a right turn of at least 180° while moving in a forward direction?

  • Did the operator accomplish a left turn of at least 180° while moving in a forward direction?

Perform Basic Backhoe Skills:

  • Is the operator able to position the backhoe as instructed for the exercise?

  • Is the operator able to set up the backhoe on the stabilizers and bucket, as recommended by the manufacturer for safe operation?

  • Is the operator able to create a trench 30 feet long, by 3 feet wide, 36 inches deep, plus or -6 inches in depth?

  • Is the operator using the boom, stick, and bucket controls, able to push the backhoe along the trenching excavation?

  • Did the operator load a dump truck using the excavated materials?

Perform Basic Front Loader Operations

  • Is the operator able to position the backhoe as instructed for the exercise?

  • Did the operator create a stockpile using the excavated materials?

  • Did the operator loaded dump truck using the excavated materials?

  • Did the operator perform grading operations?

  • Did the operator backfill the trench using the stockpiled materials?

Backhoe Shut-Down:

  • Is the operator able to move the backhoe to the designated shutdown area?

  • Is the operator able to properly shut down and secure the backhoe?

Safety:

  • Did the operator use all necessary PPE properly?

  • Did the operator properly place all safety notices for the exercise?

  • Did the operator properly follow all safety checklist and site-specific safety requirements?

  • Did the operator practice overall good safety procedures and use of the tools and assigned equipment?

Assessment Recommendations & Evaluations

  • Has the operator successfully completed with positive results all of the previous criteria?

  • Please select the candidate operator's recommendation for this field exam:

  • Please detail basis for failure:

  • Please select future date for retest:

Signatures

  • Candidate operator signature:

  • Assessor signature:

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.