Information
-
Candidate Name - HEO Field Exam - Motor Grader
-
Document No.
-
Conducted on
-
Prepared by
-
Location
-
The performance verification is designed as one method to a evaluate job skills and safe work habits of a participant. The performance of the participant must be evaluated by a designated W.C. Spratt, Inc. evaluator at an authorized location. Candidates must have a minimum passing score of 90% to pass any field exam portion of the heavy equipment operator training program.
Employee Information
-
Employee name:
-
Employee number:
-
Employee photo:
Motor Grader Equipment Type (Make and Model):
-
From the manufacturers plate please obtain this information and enter here;
Operator Details
-
If an operator has no proof of training held on record, they must not operate until proof of training competency has been proven. (Classroom CAT Training and Successful Completion).
-
Has the operator had a valid certificate of training that has been passed or refreshed within the last three years?
-
Has the operator an up to date authorization to operate, signed and renewable annually?
-
Date of test or refresher course?
-
Photo of that certification:
Pre-start Inspection:
-
Did the operator verify all safety items are identified; such as the fire extinguisher, warning signs guards, etc:
-
Did the operator position barricades and appropriate warning signs?
-
Did the operator properly position the excavator for pre-start inspection?
-
Did the operator visibly verify the condition of the bucket?
-
Did the operator verify blade sharpness and condition?
-
Did the operator check for and identify any fluid leakage in tanks, line pumps, cylinders, etc. ?
-
Did the operator complete the daily pre-operation check list? (This is done using the appropriate form within the iauditor suite).
Job Site Survey:
-
Did the operator identify potential site hazards such as but not limited; to high-voltage lines or underground utilities?
-
Did the operator identify and verify grade stakes?
-
Did the operator verify safety of equipment set-up
Start-up and Warm-up of Motor Grader:
-
Did the operator successfully start the engine?
-
Did the operator check the engine gauges for proper readings?
-
Did the operator check all controls for proper function such as but not limited to; The blade, steering and travel.
-
Did the operator properly document their findings on the required checklist?
Perform Basic Maneuvering Skills:
-
Did the operator position the motor grader as instructed for the exercise?
-
Did the operator travel the motor grader forward for at least 50 feet?
-
Did the operator travel the motor grader in reverse for at least 50 feet?
-
Did the operator accomplish a turn of at least 90° with the moldboard up - straight-frame?
-
Did the operator accomplish a turn of at least 90° with lift and lower the right side of the moldboard up-articulated
-
Did the operator accomplish a turn of at least 90° with lift and lower the right side of the moldboard up offset?
Perform Basic Moldboard (Blade) Operations:
-
Is the operator able to position the motor grader as instructed for the exercise?
-
Is the operator able to lift and lower the right side of the moldboard?
-
Is the operator able to lift and lower the left side of the moldboard?
-
Is the operator able to shift circle drawbar to the right or left?
-
Is the operator able to rotate the circle drawbar?
-
Is the operator able to raise and lower the scarifier?
-
Is the operator able to pitch (tilt) the blade forward and rearward?
Perform Basic Grading Skills:
-
Is the operator able to position the motor grader as instructed for the exercise?
-
Is the operator able to grade a rough grade following grade stakes placed along a section at least 300 feet long with a width of at least double that of the machine?
-
Is the operator able to demonstrate the rotation of the blade for high bank grading?
-
Is the operator able to perform the cutting of a V ditch at least 50 feet long with a 3 to 1 slope?
-
Is the operator able to perform the cutting of windrow with the blade adjusted so as not to drive over the freshly cut windrow?
Motor Grader Shut-Down:
-
Is the operator able to move the motor grader to the designated shutdown area?
-
Is the operator able to properly shut down and secure the motor grader?
Safety:
-
Did the operator use all necessary PPE properly?
-
Did the operator properly place all safety notices for the exercise?
-
Did the operator properly follow all safety checklist and site-specific safety requirements?
-
Did the operator practice overall good safety procedures and use of the tools and assigned equipment?
Assessment Recommendations & Evaluations
-
Has the operator successfully completed with positive results all of the previous criteria?
-
Please select the candidate operator's recommendation for this field exam:
-
Please detail basis for failure:
-
Please select future date for retest:
Signatures
-
Candidate operator signature:
-
Assessor signature: