Title Page
-
Inspected By
- Bagus Susilo
- Buddy Wang
- Deni Nurdiansyah
- Jackie Chen
- Jim Liu
- Kukuh Suprayogo
- Kusmanto
- Pam Cheung
- Qalam Nurakhmanda
- Robin Wang
-
Date of Inspection
-
Supplier
- PT. ANEKA REGALINDO (AR)
- PT. EXCELSIOR FURNITAMA
- PT KAYU PERKASA RAYA
- RESYSTA
- XINCHENG HARDWARE FURNITURE PLANT (SHUNDE)
- XINZHAN FURNITURE MANUFACTURE C0., Ltd. (HESHAN)
- FOSHAN HUATONG FURNITURE LTD
- ARTIE GARDEN INTERNATIONAL Ltd., (XINBO FURNITURE Ltd.)
- BOSCHER FURNITURE Co., Ltd.
- SHENZHEN HOME & GARDEN PRODUCTS Mfg. Co., Ltd. (ROYAL GARDEN)
- ZHEJIANG RONGXIN FURNITURE Co., Ltd.
- L.F.T.E. (USA), INC.
- QINGDAO ZHEN CHENG (FURNITURE) Co., Ltd.
-
Business Unit
- SUMMER CLASSICS
- WHITE LABEL
- PRIVATE LABEL
-
Product Category
- Chair with Swivel Mechanism and Spring Pads
- Chair with Swivel Mechanism and Swing Arms
- Chair with Swivel Mechanism only
- Chair with Spring Pads only
- Rocking Chairs
-
Material
- Aluminum Tubular
- Aluminum Tubular with PE Resin
- Cast Aluminum
- Steel
-
Collection
- ASHLAND
- ASTORIA
- ATHENA
- ATHENA PLUS
- AVONDALE ALUMINUM
- AVONDALE TEAK
- BENTLEY
- BORDEAUX
- CARMEL
- CAST STONE
- CATALINA
- CHARLESTON ALUMINUM
- CHARLESTON TEAK
- CLARO
- CLUB ALUMINUM
- CLUB TEAK
- CLUB WOVEN
- COAST
- CROQUET ALUMINUM
- CROQUET TEAK
- ELEGANTE
- HALO
- HAVANA
- HALEY
- ITALIA
- KENNEBUNKPORT
- LATTICE
- MALIBU
- MALTA
- MONACO
- MAJORCA
- MONTAUK
- MONTECITO
- MONTEREY
- NEWPORT
- PARC
- PENINSULA
- POINTE
- PROVANCE
- SANTA BARBARA
- SANTA BARBARA ALUMINUM
- SAVOY
- SERENATA
- SKYE
- SKYE PLUS
- SOHO
- SOMERSET
- ROMA
- RUSTIC
- VILLA
- WOODLAWN
- EMILIA
- REDMONT
Production Check - Material Preparation
-
Product name
-
Key tubular dimension 1
-
Key tubular dimension 2
-
Key tubular dimension 3
-
Key tubular dimension 4
-
Key tubular dimension 5
-
Add media
Production Check
-
> Production Check - Cutting / Hole Boring / Bending
-
Sweep holes are drilled on cut tubular components
-
Sweep holes dimension (mm)
-
Add media
-
Product name
-
Qty
-
Add media
-
Product name
-
Qty
-
Add media
-
Product name
-
Qty
-
Add media
-
Product name
-
Qty
-
Add media
-
Product name
-
Qty
-
Add media
-
Defect found during inspection of Cutting / Hole boring / Bending
-
Defect
-
Add media
-
> Production Check - Welding
-
Welding by means of Welding Jig
-
Full welding on load bearing points
-
TIG Welding
-
Welding quality is acceptable ?
-
Product name
-
Qty
-
Add media
-
Product name
-
Qty
-
Add media
-
Product name
-
Qty
-
Add media
-
Product name
-
Qty
-
Add media
-
Product name
-
Qty
-
Add media
-
Defect found during inspection of welding
-
Defect
-
Add media
-
> Production Check - Grinding and Polishing
-
Workmanship of Grinding & Polishing is Acceptable?
-
Is welding residue polished well and smooth?
-
Is welding hole or defect found on welding after polishing?
-
If Yes, what is the error?
-
Add media
-
Product name
-
Qty
-
Add media
-
Product name
-
Qty
-
Add media
-
Product name
-
Qty
-
Add media
-
Product name
-
Qty
-
Add media
-
Product name
-
Qty
-
Add media
-
Defect found during inspection of Grinding & Polishing
-
Defect
-
Add media
-
* Production Check - Pretreatment, Powder Coating and 3 Step Finish
-
> Production check - Pretreatment
-
Pretreatment is done at
- Auto - Spraying and Conveyor Line
- Auto - Spraying
- Dipping
-
Pretreatment is proceeded with
-
Drying
-
Drying temperature ('C)
-
Product name
-
Qty
-
Add media
-
Product name
-
Qty
-
Add media
-
Product name
-
Qty
-
Add media
-
Product name
-
Qty
-
Add media
-
Product name
-
Qty
-
Add media
-
Defect found during inspection of pretreatment
-
Defect
-
Add media
-
> Production check - Powder Coating
-
Powder coating is done at
-
Heat setting
-
Heat setting temperature (Highest temperature in the conveyor line 'C)
-
Finish panel approved by US design team
-
Has UV - 4000 Hours passed ?
-
Product name
-
Qty
-
Color
- Mahogany - S.W - KNB2 - J1955
- Ancient Earth - AKZO - PN205C
- Black - S.W - PBS2 - J1412
- Slate Gray - S.W - DNB2J - 3378
- Weathered - AKZO - MD106C
- Oyster - AKZO - JD226C
- French Linen - S.W - PWS6-C0018
- Sandal Wood - AKZO - JD240C
- Oak - AKZO - C28640X2YT
- Natural - AKZO - MD134C
- Textured Black - AKZO - C07448B3JN
- Chalk II - AKZO - C41382S2JA
- Midnight - AKZO - GNPN - 12239B - C
- Others
-
If Others, Specify
-
Powdered color finish is matching with approved finish panel
-
Powder glossy level on product
-
Same as approved finish panel
-
Adhesion cross hatch test done & passed
-
Add media
-
Product name
-
Qty
-
Color
- Mahogany - S.W - KNB2 - J1955
- Ancient Earth - AKZO - PN205C
- Black - S.W - PBS2 - J1412
- Slate Gray - S.W - DNB2J - 3378
- Weathered - AKZO - MD106C
- Oyster - AKZO - JD226C
- French Linen - S.W - PWS6-C0018
- Sandal Wood - AKZO - JD240C
- Oak - AKZO - C28640X2YT
- Natural - AKZO - MD134C
- Textured Black - AKZO - C07448B3JN
- Chalk II - AKZO - C41382S2JA
- Midnight - AKZO - GNPN - 12239B - C
- Others
-
If Others, Specify
-
Powdered color finish is matching with approved finish panel
-
Powder glossy level on product
-
Same as approved finish panel
-
Adhesion cross hatch test done & passed
-
Add media
-
Product name
-
Qty
-
Color
- Mahogany - S.W - KNB2 - J1955
- Ancient Earth - AKZO - PN205C
- Black - S.W - PBS2 - J1412
- Slate Gray - S.W - DNB2J - 3378
- Weathered - AKZO - MD106C
- Oyster - AKZO - JD226C
- French Linen - S.W - PWS6-C0018
- Sandal Wood - AKZO - JD240C
- Oak - AKZO - C28640X2YT
- Natural - AKZO - MD134C
- Textured Black - AKZO - C07448B3JN
- Chalk II - AKZO - C41382S2JA
- Midnight - AKZO - GNPN - 12239B - C
- Others
-
If Others, Specify
-
Powdered color finish is matching with approved finish panel
-
Powder glossy level on product
-
Same as approved finish panel
-
Adhesion cross hatch test done & passed
-
Add media
-
Product name
-
Qty
-
Color
- Mahogany - S.W - KNB2 - J1955
- Ancient Earth - AKZO - PN205C
- Black - S.W - PBS2 - J1412
- Slate Gray - S.W - DNB2J - 3378
- Weathered - AKZO - MD106C
- Oyster - AKZO - JD226C
- French Linen - S.W - PWS6-C0018
- Sandal Wood - AKZO - JD240C
- Oak - AKZO - C28640X2YT
- Natural - AKZO - MD134C
- Textured Black - AKZO - C07448B3JN
- Chalk II - AKZO - C41382S2JA
- Midnight - AKZO - GNPN - 12239B - C
- Others
-
If Others, Specify
-
Powdered color finish is matching with approved finish panel
-
Powder glossy level on product
-
Same as approved finish panel
-
Adhesion cross hatch test done & passed
-
Add media
-
Product name
-
Qty
-
Color
- Mahogany - S.W - KNB2 - J1955
- Ancient Earth - AKZO - PN205C
- Black - S.W - PBS2 - J1412
- Slate Gray - S.W - DNB2J - 3378
- Weathered - AKZO - MD106C
- Oyster - AKZO - JD226C
- French Linen - S.W - PWS6-C0018
- Sandal Wood - AKZO - JD240C
- Oak - AKZO - C28640X2YT
- Natural - AKZO - MD134C
- Textured Black - AKZO - C07448B3JN
- Chalk II - AKZO - C41382S2JA
- Midnight - AKZO - GNPN - 12239B - C
- Others
-
Powdered color finish is matching with approved finish panel
-
Powder glossy level on product
-
Same as approved finish panel
-
Adhesion cross hatch test done & passed
-
Add media
-
Defect found during inspection of powder coating process
-
Defect
-
Add media
-
> Production check - 3 Step Finish
-
3 Step finish is done at
-
Heat setting of top coating
-
Heat setting temperature (Highest temperature in the conveyor line 'C)
-
3 Step finish panel approved by US design team
-
Has UV - 4000 Hours passed ?
-
Product name
-
Qty
-
Color
- Slate Gray - TAIHO - Glaze - CH-82244N/S-706-1, Top Coating - CWYC301F50
- Weathered - TAIHO - Glaze - CH-82117C/S-706-1, Top Coating - CWYC301F50
- Oyster - TAIHO - Glaze - LCH-82068N/S-706-1, Top Coating - CWYC301F50
- French Linen - S.W - Glaze - S66WP6022, Top Coating - CWYC301F50
- Sandalwood - TAIHO - Glaze - CH-82237N/S-706-1, Top Coating - CWYC301F50
- Oak - TAIHO - Glaze - CH-82475N/S-706-1, Top Coating - CWYC301F50
- Natural - TAIHO - Glaze - CH-210409267, Top Coating - CWYC301F50
- Others
-
3 Step finish is matching with approved finish panel
-
Powder glossy level on product
-
Same as approved finish panel
-
Adhesion cross hatch test done & passed
-
Glazing is evenly applied to entire products
-
Add media
-
Product name
-
Qty
-
Color
- Slate Gray - TAIHO - Glaze - CH-82244N/S-706-1, Top Coating - CWYC301F50
- Weathered - TAIHO - Glaze - CH-82117C/S-706-1, Top Coating - CWYC301F50
- Oyster - TAIHO - Glaze - LCH-82068N/S-706-1, Top Coating - CWYC301F50
- French Linen - S.W - Glaze - S66WP6022, Top Coating - CWYC301F50
- Sandalwood - TAIHO - Glaze - CH-82237N/S-706-1, Top Coating - CWYC301F50
- Oak - TAIHO - Glaze - CH-82475N/S-706-1, Top Coating - CWYC301F50
- Natural - TAIHO - Glaze - CH-210409267, Top Coating - CWYC301F50
- Others
-
3 Step finish is matching with approved finish panel
-
Powder glossy level on product
-
Same as approved finish panel
-
Adhesion cross hatch test done & passed
-
Glazing is evenly applied to entire products
-
Add media
-
Product name
-
Qty
-
Color
- Slate Gray - TAIHO - Glaze - CH-82244N/S-706-1, Top Coating - CWYC301F50
- Weathered - TAIHO - Glaze - CH-82117C/S-706-1, Top Coating - CWYC301F50
- Oyster - TAIHO - Glaze - LCH-82068N/S-706-1, Top Coating - CWYC301F50
- French Linen - S.W - Glaze - S66WP6022, Top Coating - CWYC301F50
- Sandalwood - TAIHO - Glaze - CH-82237N/S-706-1, Top Coating - CWYC301F50
- Oak - TAIHO - Glaze - CH-82475N/S-706-1, Top Coating - CWYC301F50
- Natural - TAIHO - Glaze - CH-210409267, Top Coating - CWYC301F50
- Others
-
3 Step finish is matching with approved finish panel
-
Powder glossy level on product
-
Same as approved finish panel
-
Adhesion cross hatch test done & passed
-
Glazing is evenly applied to entire products
-
Add media
-
Product name
-
Qty
-
Color
- Slate Gray - TAIHO - Glaze - CH-82244N/S-706-1, Top Coating - CWYC301F50
- Weathered - TAIHO - Glaze - CH-82117C/S-706-1, Top Coating - CWYC301F50
- Oyster - TAIHO - Glaze - LCH-82068N/S-706-1, Top Coating - CWYC301F50
- French Linen - S.W - Glaze - S66WP6022, Top Coating - CWYC301F50
- Sandalwood - TAIHO - Glaze - CH-82237N/S-706-1, Top Coating - CWYC301F50
- Oak - TAIHO - Glaze - CH-82475N/S-706-1, Top Coating - CWYC301F50
- Natural - TAIHO - Glaze - CH-210409267, Top Coating - CWYC301F50
- Others
-
3 Step finish is matching with approved finish panel
-
Powder glossy level on product
-
Same as approved finish panel
-
Adhesion cross hatch test done & passed
-
Glazing is evenly applied to entire products
-
Add media
-
Product name
-
Qty
-
Color
- Slate Gray - TAIHO - Glaze - CH-82244N/S-706-1, Top Coating - CWYC301F50
- Weathered - TAIHO - Glaze - CH-82117C/S-706-1, Top Coating - CWYC301F50
- Oyster - TAIHO - Glaze - LCH-82068N/S-706-1, Top Coating - CWYC301F50
- French Linen - S.W - Glaze - S66WP6022, Top Coating - CWYC301F50
- Sandalwood - TAIHO - Glaze - CH-82237N/S-706-1, Top Coating - CWYC301F50
- Oak - TAIHO - Glaze - CH-82475N/S-706-1, Top Coating - CWYC301F50
- Natural - TAIHO - Glaze - CH-210409267, Top Coating - CWYC301F50
- Others
-
3 Step finish is matching with approved finish panel
-
Powder glossy level on product
-
Same as approved finish panel
-
Glazing is evenly applied to entire products
-
Add media
-
Defect found during inspection
-
Defect
-
Add media
-
> Production Check - Weaving
-
Resins are supplied by SC selected supplier
-
Has UV - 4000 Hours passed ?
-
Color finish of product resin is good matching with approved panel
-
If product resin is with Zebra-Line color effect
-
Tip of resin is well stappled by Pin and Covered
-
Weaving inside the product is clean and neat
-
Joints of resin is not on Load-Bearing surface and long enough to avoid raveling
-
Staples/Pins on products are Galvanized and is firmly stapling the resin on the tubular
-
Tubular is well wrapped by Resin to avoid tubular surface see-through
-
Product name
-
Qty
-
Add media
-
Resin color
-
Resin #1
-
Resin #2
-
Resin #3
-
Weaving pattern is same as production sample
-
Weaving tension is acceptable and same as production sample
-
Product name
-
Qty
-
Add media
-
Resin color
-
Resin #1
-
Resin #2
-
Resin #3
-
Weaving pattern is same as production sample
-
Weaving tension is acceptable and same as production sample
-
Product name
-
Qty
-
Add media
-
Resin color
-
Resin #1
-
Resin #2
-
Resin #3
-
Weaving pattern is same as production sample
-
Weaving tension is acceptable and same as production sample
-
Product name
-
Qty
-
Add media
-
Resin color
-
Resin #1
-
Resin #2
-
Resin #3
-
Weaving pattern is same as production sample
-
Weaving tension is acceptable and same as production sample
-
Product name
-
Qty
-
Add media
-
Resin color
-
Resin #1
-
Resin #2
-
Resin #3
-
Weaving pattern is same as production sample
-
Weaving tension is acceptable and same as production sample
-
Defect found during inspection of weaving
-
Defect
-
Add media
Finished Product
-
Product name
-
Qty
-
Add media
-
Product dimension (Inches)
-
Dimension printed on Web (Inches)
-
Product dimension is acceptable (Tolerance <0.25 Inch)
-
Add media
-
Product weight (Lbs)
-
Weight printed on web (Lbs)
-
Product weight is acceptable (Tolerance <7 Lbs)
-
Add media
-
All the legs are standing on correct positions
-
Add media
-
Product name
-
Qty
-
Add media
-
Product dimension (Inches)
-
Dimension printed on Web (Inches)
-
Product dimension is acceptable (Tolerance <0.25 Inch)
-
Add media
-
Product weight (Lbs)
-
Weight printed on web (Lbs)
-
Product weight is acceptable (Tolerance <7 Lbs)
-
Add media
-
All the legs are standing on correct positions
-
Add media
-
Product name
-
Qty
-
Add media
-
Product dimension (Inches)
-
Dimension printed on Web (Inches)
-
Product dimension is acceptable (Tolerance <0.25 Inch)
-
Add media
-
Product weight (Lbs)
-
Weight printed on web (Lbs)
-
Product weight is acceptable (Tolerance <7 Lbs)
-
Add media
-
All the legs are standing on correct positions
-
Add media
-
Product name
-
Qty
-
Add media
-
Product dimension (Inches)
-
Dimension printed on Web (Inches)
-
Product dimension is acceptable (Tolerance <0.25 Inch)
-
Add media
-
Product weight (Lbs)
-
Weight printed on web (Lbs)
-
Product weight is acceptable (Tolerance <7 Lbs)
-
Add media
-
All the legs are standing on correct positions
-
Add media
-
Product name
-
Qty
-
Add media
-
Product dimension (Inches)
-
Dimension printed on Web (Inches)
-
Product dimension is acceptable (Tolerance <0.25 Inch)
-
Add media
-
Product weight (Lbs)
-
Weight printed on web (Lbs)
-
Product weight is acceptable (Tolerance <7 Lbs)
-
Add media
-
All the legs are standing on correct positions
-
Add media
-
> Seat panel type
- Detachable aluminum frame with PVC strapping
- Woven seat panel
- Aluminum tubular seat pan
-
Powder coating color of seat pan frame?
- Mahogany - S.W - KNB2 - J1955
- Ancient Earth - AKZO - PN205C
- Black - S.W - PBS2 - J1412
- Slate Gray - S.W - DNB2J - 3378
- Weathered - AKZO - MD106C
- Oyster - AKZO - JD226C
- French Linen - S.W - PWS6-C0018
- Sandal Wood - AKZO - JD240C
- Oak - AKZO - C28640X2YT
- Natural - AKZO - MD134C
- Textured Black - AKZO - C07448B3JN
- Chalk II - AKZO - C41382S2JA
- Midnight - AKZO - GNPN - 12239B - C
- Others
-
PVC strapping - Width/Thickness
-
PVC strapping color
-
Does detachable fit to the seat pan frame of product
-
Number of detachable frame per product
-
Add media
-
Resin
-
Color of resin
-
Weaving pattern and tension is acceptable
-
Number of slats per product
-
Dimension of slat tubular
-
Color
-
Welding and polishing of slats on seat pan frame is acceptable
-
Add media
-
D-Ring on seat pan
-
Number of D-Ring per product
-
Material D'Ring
-
Is D-Ring Galvanized and De-Magnetized
-
D-Ring color
-
Add media
-
> Legs
-
Is tubular of leg with wall inside
-
If No, if an aluminum galvanized rod is inserted inside
-
Add media
-
Are legs at correct position
-
Wobbling issue is found on product
-
Add media
-
> Footglide
-
Footglide type
-
Color of footglide
-
Footglide material
-
Dimension of footglide
-
Add media
-
Color of footglide
-
Footglide material
-
Dimension of footglide
-
Dimension of screw
-
Metal hardware of footglide is in stainless steel and un-magnetized
-
Add media
-
If others, specify
-
Add media
Motion Finished Products with Mechanism
-
> Chair with swivel mechanism
-
Type of swivel mechanism
-
With Nylon bushing
-
Supplier of swivel mechanism and Nylon bushing
-
Wax is applied to Swivel mechanism and Nylon bushing
-
Type of wax
-
Add media
-
Is swivel mechanism firmly mounted onto base of product
-
Add media
-
Is swivel mechanism firmly installed at the seat frame
-
Add media
-
Is hardware stainless steel and de-magnetized
-
Is hardware including lock washer and lock-nut
-
Add media
-
Is the pole holding the axle of swivel mechanism vertical and at center of the base
-
Add media
-
Dimension of vertical pole
-
Any irregular sound or swaying is found when seat frame is resolved
-
If Yes, what is the cause
-
> Rocking chair with spring PADS
-
Type of Spring Pad
-
Supplier
-
Number of Spring Pads per products
-
Dimension of Spring Pads
-
If the Spring Pads are connecting the seat frame with
-
Add media
-
Are the Spring Pads firmed installed onto the product?
-
Add media
-
Are hardware stainless steel and de-magnetized?
-
Are hardware including lock washer and lock nut?
-
Add media
-
Any irregular sound, swaying or shaking is found when the chair is rocked
-
If the chair found leaning too much to the front or to the back when it is seated
-
If the back of seat panel hit the base when it is rocked forward?
-
Add media
-
> Rocking chair with NO spring PADS
- Yes
- No
- 0
- 1
- 2
- 3
- >3
-
Material being used on the bottom surface of rocking rod
-
Color of protective glide
-
How the protective footglide mounting on rocking rod
-
Add media
-
Is the mounting way durable
-
Add media
-
> Chair with Spring Arms
-
Type of Spring Arm
-
Number of Spring Arm per product
-
Material of Spring Arm
-
Dimension of Spring Arms (distance betwen center of each holes) (mm)
-
Dimension of spring arms thickness (mm)
-
Are Spring Arms powder coated?
-
Color
-
Are Spring Arm firmly installed to connect the seat frame and base of product?
-
Are hardware stainless steel and de-magnitazed?
-
Are hardware including lock washer and lock nut?
-
Is any lubricated substance added onto spring arm?
-
If Yes, specify
-
Is the chair found with irregular sound, swaying, shacking or any issue when it is rocked?
-
If the bottom of seat frame hits the base or ground when the chair is rocked?
-
If there is stopper installed at the base or bottom of seat frame?
-
Add media
Company Logo
-
Metal Plate type
- SC Oval Nail-on
- SC Oval Tie-On
- SC Narrow Nail-on
- SC Narrow Tie-on
- WL Nail-on
- WL Tie-on
- Others
-
If Others, specify
-
Add media
-
Metal Plate placement
-
Are the pins with rough surface and in stainless steel or galvanized?
-
Length of pins
-
Add media
-
Metal Plate placement
-
Are the pins with rough surface and in stainless steel or galvanized?
-
Length of pins
-
Add media
-
Metal Plate placement
-
For Nail-on plate, are the pins with rough surface and in stainless steel or galvanized
-
Metal Plate placement
-
Are the pins with rough surface and in stainless steel or galvanized?
-
Length of pins
-
Add media
-
Metal Plate placement
-
Metal Plate placement
-
Hangtag Type #1
- SC Wrought - Iron Hangtag
- SC Weaving - Hangtag
- SC Product Hangtag
- WL Hangtag
- N/A
-
Hangtag Type #2
- SC Wrought - Iron Hangtag
- SC Weaving - Hangtag
- SC Product Hangtag
- WL Hangtag
- N/A
-
Hangtag placement
Labels on Product
-
Prop 65 Label
-
Date stamping code label
-
PO# Label
-
Country of origin label
-
Are all labels self-adhered onto product
-
Will the printing words of labels bleed once it get wet
-
Add media
Package
-
Product
-
Qty
-
# Qty item / Box
-
Has package been proceed yet during inspection? *If no, the report of package is subject to one (1) package for inspection*
-
Carton type
-
Carton Joint
-
> Bulk package qty/carton ?
-
Is a white hangtag printed with PO#, SKU code, description and barcode hang onto of the chair?
-
Add media
-
Number of products per carton
-
Is an additional white hangtag printed with PO#, SKU code, description and barcode hang onto each of the chair?
-
Add media
-
How many chair stacking
-
Cover wrapping?
-
Base of the stacking
-
If all the stacking chairs hung with individual SKU label
-
Is an additional white hangtag printed with PO#, SKU code, description and barcode hang onto each of the chair?
-
Add media
-
> Carton dimension (Inches)
-
Acceptable (Compared with approved package)
-
Bulk package dimension (inches)
-
Approved package dimension (inches)
-
Images to show measurement of carton package
-
> Carton weight (pounds)
-
Acceptable (Compared with approved package)
-
Bulk package weight (pounds)
-
Approve package weight (pounds)
-
Images to show carton weight
-
> Carton Marking
-
Company Logo
-
Warning sign
-
Country of Origin
-
Upside arrow print
-
> Silicon Gel
-
Type of silicon gel
-
# Of silicon gel bags / carton
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
-
Weight of silicon gel
-
Add media
-
Package passed drop test
-
Is packing sequence same as approved package sample?
-
Are package materials same as approved package sample?
-
Barcode Label
-
Package sequence images
-
Green point sticker
-
# of version of green point sticker
- 1
- 2
- 3
- 4
- 5
- N/A
-
Change of product
-
Add media
-
> Package for K/D Products
-
With assembly instruction
-
A/I is approved by designer
-
Are hardware in stainless steel and de-magnetized?
-
Hardware types and quantity are correct?
-
Are hardware packed properly in a woven bag?
-
Hardware bag tied by red string?
-
A red label printed with "Assembly Hardware Enclosed" is put at top corner of carton to hold ending tip of red string
-
Add media
Safety Tools
-
Has static test has been done? (If NO, the product is not allowed to ship)
-
Has static test result is passed?
-
Has impact test been done? (If NO, the product is not allowed to ship)
-
Has impact test result is passed?
-
Has leg strength test been done? (If NO, the product is not allowed to ship)
-
Has leg strength result is passed?
-
Where is the safety test report location?
-
Safety test report date
