ITP - Stressing

Post-tensioning ITP for Stressing

• Client

• Post-tensioning ITP Stressing prepared by

• Project Name

• Project Number

• Level and pour number

• Stressing Date

  Date
• Location
  Address

• This Post-tensioning Inspection & Test Plan (ITP) must be completed for each slab stressed on the project.

Equipment Check

• Is the calibration certificate for the Jack and Gauge current? (within 6 months)

  Select If yes, Type in date of calibration + Jack & gauge Number If No, DO NOT use

  • If yes, Type in date of calibration + Jack & gauge Number
  • If No, DO NOT use

• Type in required Initial Stressing pressure (check calibration certificate)

• Type in required Final Stressing pressure (check calibration certificate)

Required concrete strength achieved

• Type in the lowest concrete test result achieved for the Initial Stressing

• Type in the lowest concrete test result achieved for the Final Stressing

• Were the concrete cylinders cured on site?

  Select Yes If No, were they air or water cured?

  • Yes
  • If No, were they air or water cured?

• Were hard copies of the concrete strength results received?

  If Yes, note from who and date

  No

Wedges

• Note batch number and suppliers name

• Note batch number and suppliers name

• Note batch number and suppliers name

• Note batch number and suppliers name

Blocks and Barrels

• Note batch number and suppliers name

• Note batch number and suppliers name

• Note batch number and suppliers name

• Note batch number and suppliers name

All Tendons Stressed

• Have all Tendons been stressed?

  Yes

  If No, add comment

Stressing Extensions

• Have the extensions been measured and recorded?

  Yes

  If No, add comment

• Have the extensions been submitted for approval?

  Yes

  If No, add comment

• SRG Leading Hand - I confirm the post-tensioning stressing is complete.

  Sign

• Main Contractor

  Sign