MIB QA Check List

Does the gate type match the order?

Was the gate paperwork signed off?

Are all of the serial numbers written down?

Is the gate left handed?

Is the flange shaft ring clip completely seated?

Was the motor lever push test performed?

Was the gate tested?

Does the gate have a "tested by" sticker signed?

Are any other controllers/ devices installed (MID, MBS, MMV, MSS, etc)

Are there yellow marks on the upper lever bolts?

Does the gate have the correct number of springs?

Are the plastic clips installed?

Does the drive unit serial number label match the drive unit type?

Are all 4 BDU hold down bolts torqued?

Are all 4 hood bumpers installed?

Does the gate have the correct UL nameplate?

Does the gate serial number sticker match the gate type?

Does the color match the order?

Does the hood match the housing?

Does the door match the housing?

Is the gate set up for articulated?

Does it have the T-bracket?

Are all 3 bolts installed for the T-bracket?

Does the gate have 4 springs?

Does the gate have any accessories?

Is the flange correct?

Standard flange? (Includes 4xM8 bolts, 2xM10 bolts, and other hardware)

Octagonal swing away flange? (Includes 2xM10 bolts, M10 lock washers)

Round boom swing away flange? (Includes 2xM10 bolts, M10 lock washers)

Wood boom flange? (Includes 2xM10 bolts, M10 lock washers, other hardware)

Wood boom adapter? (X)

Foam boom flange? (Includes 2xM10 bolts, M10 lock washers)

Disney flange? (Includes 2xM10 bolts, M10 lock washers, other hardware)

Are the u-rails included?

Is anything else ordered with the gate that needs to be packaged?

Is anything else ordered with the gate that needs to be installed?

Does the gate have special wiring?

Are 2 keys included?

Is the document holder in place?

Is the manual included?

Are 2 warning stickers included?

Is the overall fit and finish up to Magnetic Quality?