Title Page
-
Site conducted
-
Conducted on
-
Inspection by
Pre-Check & General Information
-
Customer:
-
Order #:
-
Item Identification:
-
What machine center manufactured this order?
-
What style of box/design is this?
- RSC or other flap style box (FOL, Gapped Flap, HSC, Flanged Tube, D/C RSC, etc.).
- D/C Style.
- Scored Pad, Pad, etc.
- Other.
-
What size sample type are you comparing? (Quantity must be greater than 10 pieces)
Sampling Findings
-
What variation are you looking for specifically?
- Glue Joint Width
- Glue Joint Variation
- Glue Joint skewness
- Glue Joint Fishtail
- Glue Application Volume
- Glue Application Registration
- Ink Color Accuracy (Ex: Ink matches Swatch)
- Print Area Registration
- Overall Print Quality Ex: Tracking, Registration, Ink Color, etc.
- Ink Coverage (For Blanket or Full panel Print)
- Litho-label placement
- D/C Stretch (Blank Size)
- D/C Trimming Properly
- D/C Crush
- D/C Scrap Properly
- D/C Score Pressure
- Flexo Score pressure
- Flexo Slot Depth (Overcut vs. Undercut)
- Flexo D/C Attachment Placement
- Vendor Material Warp
- Load Tag/Unit Accuracy
- Other
- N/A
-
If "Other/N/A" was selected on previous question, what variation are you looking for?
-
If teammates are assisting you, have they been properly trained as to what variation they are looking for?
-
What measurement or characteristic of variation are you looking for?
Findings
-
Describe your findings during inspection
Final Inspection/Release
-
At what time during manufacturing did you verify this Inspection (Start or run, middle of run, End of run)?
-
Would you say your inspection yielded appropriate results?
-
If yes, briefly describe why.
-
I approve of release of this product
-
End time of Inspection:
