Information

  • Document No.

  • Audit Title

  • Client / Site

  • Conducted on

  • Weather

  • Prepared by

  • Location
  • Personnel

CHECK SUPPORT SYSTEMS

  • The structure is able to support the loads ?

  • The tie back rope is properly tied off?

  • The outrigger is of proper design and correctly assembled?

  • The number of counterweights are correct for the overhang load?

  • All beams,clamps and hooks are correctly tied back?

  • Sockets and davits are correctly secured?

SUSPENSION UNIT

  • All parts (rails,rungs,deck,bumper rollers, welds,connections ,toe boards/guardrails,stanchions) of the stage/cage/chair have been checked to make sure that they are safe and will not break or come loose?

  • The stirrups or connections and their parts have been checked and are safe?

  • The capacity plate showing the maximum load will not be exceeded?

  • The stage stirrups are in line with the roof supports?

HOIST COMPONENTS

  • The manufactures operating instructions have been read and understood?

  • Hoists are in proper operating condition?

  • The wire rope has been inspected, reeved and is attached properly?

  • The length of steel wire rope is long enough to reach the ground and is attached correctly to the roof support?

  • After load is applied, all fittings have been checked for tightness?

  • Electrical cable or air hose connections have been inspected and are safe. Strain relief has been provided?

  • The power supply is enough to operate the hoist properly?

  • The hoist is correctly attached to the stirrup?

FALL ARREST SYSTEM

  • Each person to use the stage/cage/chair has own independent fall arrest system?

  • Each lifeline has been totally checked for safe use and is correctly attached at an independent safe anchor point at roof level. Roof edge protection has been provided some lifeline?

  • Each rope grab has been checked for correct operation and installation?

  • Each full body harness or belt has been thoroughly check to make sure that all components are safe?

  • Each lanyard has been thoroughly checked for safe condition. All parts are sound and correctly attach the rope grab. The D ring is in the center of the back?

  • The body harness is the proper size and fits correctly and is snug to the body?

ADDITIONAL CHECKS

  • The equipment must be kept clear of exposed electrical lines and equipment.

  • The equipment must not be used in bad weather conditions

  • The total rigging must be checked each time you use or move it.

  • Never overload the equipment.

  • Immediately report any improper operation to your supervisor

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.