Titan Fabrications - Elumatec CNC SBZ 122/71 Checklist

Lockable mains isolator switch

Emergency Stop button

Noise abatement enclosure

Safety hood with safety contact strip and safety switch

Guard door/maintenance door at rear with electrical interlock

Safety fences at rear

Test safety contact strip to DIN EN ISO 1356-2

Entire System - Rough cleaning after every shift, broom clean

Internal machine area - Clean swarf out of entire internal area of machine (Suction/sweeping or cloth to be used)

Clean profile face - Blow clean with compressed air

Gear racks - Suction cleaning, sweeping or wiping off swarf

Guide System - Suction cleaning, sweeping or wiping off swarf

Clamping cylinder - check seal integrity; check clamping buffer for signs of damage (make note if replacement is required)

Tools - Check for signs of wear and/or damage (make note if replacement is required)

Pneumatic lines and connections - Blow clean with compressed air or use lint-free cleaning cloths

Pneumatic maintenance unit (Water Separator) - Blow clean with compressed air or use lint-free cleaning cloths and check seal integrity/leakage; water separator: check fill level and drain if necessary

Electrical wiring and connections - Blow clean with compressed air or use lint-free cleaning cloths

Spray Unit, tool lubrication - Check fill level and refill if necessary

Pulsed Coolant System, gear rack lubrication - Check fill level and refill if necessary

Control consoles and air-cooled main electrical cabinets - Regularly inspect the air intake and outlet filters, clean if soiled (Replace if necessary)

Polycarbonate pane in safety hood - Visual inspection for damage (holes, cracks or clouding)

Machining spindle - Check if replacement is required (This has to be carried out by Elumatec staff, non-compliance causes the warranty to become void)

Entire System - Thorough clean

Guide System - Lubricate with machine oil

Linear Guide, X,Y & Z-axis - To be greased with Multi-purpose grease (Order no. 88907128)

Pneumatic Lines and connections - Visual inspection for cracks and porous areas, check that screw connections are securely seated and free of leakage

Electrical wiring and connections - Visual inspection for cracks and porous areas, check that screw connections are securely seated and free of leakage

Linear guide for material stop up/down - To lubricate use multi-purpose grease (order no.88907128)

Yearly service - Call out