Title Page
-
Conducted on
-
Prepared by
-
If no check required, please leave any comments under each checklist.
Daily Checklist
-
All moving need periodical oiling
-
Check the power cable regularly and replace if worn
-
Make sure the handle is always dry for firm grip
-
Regularly clean the Miter and retainer apparatus
-
Carefully clean after use all the chips and residues accumulated on the working surface with an air gun or a dry brush
-
Check regularly the end milling blade and sharpen when required
-
Check absorber mounted on the shaft bearing assembly (Replace absorber if deteriorated or softened
-
Any comments
Yearly Checklist
-
Yearly service - Call out
-
Any comments
