Information

  • TPM Lathe

  • Conducted on

  • By

  • Photo required.

Safety devices.

  • Check condition of lathe guard.

  • Check operation of stop buttons and lathe guard.

Mechanical.

  • Check for fluid leaks / repair as required.

  • Check head stock and associated equipment for damage / wear

  • Check tail stock and associated equipment for damage / wear

  • Check belts and pulleys for condition and correct tension.

  • Check condition of cross slide and tool post.

  • Check condition of slides on machine bed.

  • Lubricate all points.

Control panel and electrics.

  • Check control panel for damage.

  • Check for excess arcing of contractors during operation.

  • Isolate machine.

  • Check cleanliness of panel, clean as required.

  • Check tightness of connections 30%?connections.

  • Check panel wiring for sins of heat or damage.

  • Check condition of cables to all drive motors.

  • Check condition of limit switches

Final operation check.

  • Check all operations.<br><br><br>

Additional Comments

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.