扉页

  • Ship name :

  • Name of Chief engineer :

  • Name of captain:

  • Name of Superintendent :

  • Visit Dates:

  • Port :

审计

A: Certificate and Documentation

  • Statutory and Class certificate fitted according to Form DCP-FM03

  • 5 year service for life boat / rescue boat <br>launching devices<br>

  • 5 year service for life boat on load release gear

  • Status of personnel certificates

  • PSC Inspection File

  • Class survey file

  • Check list carried out as mentioned on ISM

  • Drill record

  • Maintenance record of individual equipment

  • Muster list

  • Other manuals and documentations

  • Status of nautical publications, international <br>convention documentations & flag <br>administration publications<br>

B-1: First Impression (Outside Shell)

  • Ship’s bow

  • Top side

  • Boot top

  • Draft mark

  • Stern

  • Mooring condition

  • Accommodation ladder and safety net

  • Paint loss if found

  • Heavy pitting/corrosion if found

  • Gangway watch

  • Response from on duty officer/crew

B-2:Water ballast tanks

  • No 1 WBT( p’side )

  • No 1 WBT( s’side )

  • No 1 WBT(Center )

  • No 2 WBT( p’side )

  • No 2 WBT( s’side )

Superintendent's Comments : No. 1 WBT( p’side )

  • 1. Forward watertight bulkhead

  • 2. Aft watertight bulkhead

  • 3. Side shell plating

  • 4. Floor (tank slopping plate)

  • 5. Upper plating (upper deck under)

  • 6. Web frame, longitudinal stiffeners, brackets, face plate and carlings

  • 7. Vertical ladder and step

  • 8. Zinc anode

  • 9. Air pipe, sounding pipe and extended spindles

  • 10. Striking plate underneath sounding pipe, plating underneath bell mouth

No. 1 WBT( s’side )

  • 1. Forward watertight bulkhead

  • 2. Aft watertight bulkhead

  • 3. Side shell plating

  • 4. Floor (tank slopping plate)

  • 5. Upper plating (upper deck under)

  • 6. Web frame, longitudinal stiffeners, brackets, face plate and carlings

  • 7. Vertical ladder and step

  • 8. Zinc anode

  • 9. Air pipe, sounding pipe and extended spindles

  • 10. Striking plate underneath sounding pipe, plating underneath bell mouth

No. 2 WBT( p’side )

  • 1. Forward watertight bulkhead

  • 2. Aft watertight bulkhead

  • 3. Side shell plating

  • 4. Floor (tank slopping plate)

  • 5. Upper plating (upper deck under)

  • 6. Web frame, longitudinal stiffeners, brackets and face plate and carlings

  • 7. Vertical ladder and step

  • 8. Zinc anode

  • 9. Air pipe, sounding pipe and extended spindles

  • 10. Striking plate underneath sounding pipe, plating underneath bell mouth

No. 2 WBT( s’side )

  • 1. Forward watertight bulkhead

  • 2. Aft watertight bulkhead

  • 3. Side shell plating

  • 4. Floor (tank slopping plate)

  • 5. Upper plating (upper deck under)

  • 6. Web frame, longitudinal stiffeners, brackets, face plate and carlings

  • 7. Vertical ladder and step

  • 8. Zinc anode

  • 9. Air pipe, sounding pipe and extended spindles

  • 10. Striking plate underneath sounding pipe, plating underneath bell mouth

No. 1 WBT( Center )

  • 1. Forward watertight bulkhead

  • 2. Aft watertight bulkhead

  • 3. Side shell plating

  • 4. Floor (tank slopping plate)

  • 5. Upper plating (upper deck under)

  • 6. Web frame, longitudinal stiffeners, brackets, face plate and carlings

  • 7. Vertical ladder and step

  • 8. Zinc anode

  • 9. Air pipe, sounding pipe and extended spindles

  • 10. Striking plate underneath sounding pipe, plating underneath bell mouth

B-3. Fore Peak Tank Superintendent's Comments :

  • 1. Bow :

  • 2. Watertight collision bulkhead:

  • 3. Stringer deck:

  • 4. Floor (bottom shell plating):

  • 5. Frmes, longitudinal girders, longitudinal, brackets and carlings:

  • 6. Vertical ladder and step:

  • 7. Zinc anode:

  • 8. Air pipe, sounding pipe and ballast pipe:

  • 9. Striking plate underneath sounding pipe, plating underneath bell mouth:

  • 10. Hawse pipe:

B-4. Aft Peak Tank Superintendent’s Comments :

  • 1. Stern:

  • 2. Watertight bulkhead adjacent to engine room:

  • 3. Stringer deck:

  • 4. Inner bottom:

  • 5. Vertical ladder and step:

  • 6. Zinc anode:

  • 7. Air pipe, sounding pipe and ballast piping:

  • 8. Striking plate underneath sounding pipe, plating underneath bell mouth:

B-5. Cargo holds

  • No.1 P Hold

  • No.1 S Hold

  • No.2 P Hold

  • No.2 S Hold

Superintendent’s Comments : No. 1 P.S. CARGO HOLD

  • 1. Vertical ladder, step, platform, cover, handrail:

  • 2. Forward bulkhead :

  • 3. Aft bulkhead:

  • 4. Side frames, brackets and pipe:

  • 5. Mountain construction, post:

  • 6. Chain tunnel:

  • 7. Return chain tunnel:

  • 8. Chain:

  • 9. Manhole cover with coaming:

No. 1 S.S. CARGO HOLD

  • 1. Vertical ladder, step, platform, cover, handrail:

  • 2. Forward bulkhead :

  • 3. Aft bulkhead:

  • 4. Side frames, brackets and pipe:

  • 5. Mountain construction, post:

  • 6. Chain tunnel:

  • 7. Return chain tunnel:

  • 8. Chain:

  • 9. Manhole cover with coaming:

No. 2 P.S. CARGO HOLD

  • 1. Vertical ladder, step, platform, cover, handrail:

  • 2. Forward bulkhead :

  • 3. Aft bulkhead:

  • 4. Side frames, brackets and pipe:

  • 5. Mountain construction, post:

  • 6. Chain tunnel:

  • 7. Return chain tunnel:

  • 8. Chain:

  • 9. Manhole cover with coaming:

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.