Information
-
Job Site Name
-
Conducted on
-
Prepared by
-
Supervisor's Name
-
Location
UTV INSPECTION
UTV Inspection
-
Is this the first time this piece of equipment has been inspected? / ¿Es esta la primera vez que se inspecciona este equipo?
-
Is there any visible damage? / ¿Hay algún daño visible?
-
Take pictures of all damages. / Toma fotos de todos los daños.
-
Is this Equipment Rented
-
Equipment Number
-
Piedmont Steel UTV Equipment Number
- RTVX 1801
- RTVX #2
- RTVX #3
- RTVX #4
- RTVX#5
- RTV #13
- RTVX 2001
- RTVX 2002
- RTVX 2101
- RTVX 2102
- RTVX 2103
- RTVX 2104
- RTVX 2105
- RTVX 1120
- RTVX 2201
- RTVX 2202
- RTVX 2301
- RTVX 2302
- RTVX 2303
- RTVX 2304
-
UTV Hour Meter Reading / Lectura del Cronómetro UTV
-
UTV Odometer Reading / Lectura del Cuentakilómetros de UTV
-
Walk around inspection - (Look around and under the vehicle for such items as loose bolts, trash build up, oil or coolant leaks, broken or worn parts)
-
Is the operator's manual present and in good condition? / ¿El manual del operador está presente y en buenas condiciones?
-
Fire Extinguisher: Secure and charged. / Extinguidor: Seguro y cargada.
-
Fire Extinguisher: Has current monthly inspection and the inspection tag has been signed / Extinguidor: Tiene una inspección mensual actual y la etiqueta de inspección ha sido firmada
-
Wheel chocks are present / Cuñes de rueda están presentes
-
Traffic cones (2) are present / Conos de tráfico (2) están presentes
-
Operator’s Compartment: Is the operator's manual present and in good condition?
-
Check DANGER, WARNING CAUTION Labels
-
Check fuel - Turn key switch to “ON” check amount of fuel by fuel gauge, Fill when less the 1/4
-
Check engine oil - Check oil before starting engine or at least 5 minutes after engine has stopped. Never mix two different types of oil
-
Check transmission fluid
-
Check brake fluid level - Never operate if brake fluid is below the “MIN” mark.
-
Check coolant level
-
Clean grill/radiator screen
-
Check front and rear joint boots - Check boots for cuts, cracks or deterioration
-
Check brake and speed control pedal - Ensure free travel and smooth operation
-
Check parking brake - Ensure when brake is applied the corresponding light illuminates on the instrument cluster
-
Check indicators, gauges and meter
-
Check lights
-
Check seat belts
-
Check tire pressure
-
Check backup alarm
-
Does the UTV shift into reverse and move appropriately?
-
Does the UTV shift into drive and move appropriately?
-
Does the UTV shift in 4x4 and 2x4 and move appropriately?
-
Operator's Name and Signature: