Information
-
Exch/FFPxx and ABFFP ID
-
Add location
-
Conducted on
-
Pieter Van Wyk
-
Add signature
-
If no tubes enter the closure then utilise the dome with the valve fitted. There is minimal risk that the original dome base will be damaged.
-
Take photo of gauge once stabilised. Ideally show the ABFFP label in background
-
Monitor the pressure for 60 seconds
-
Take photo of the gauge after 60 seconds. Ideally show the ABFFP label in background
-
Release the pressure by slowly opening the valve tap.
-
Take internal photo of compliant ABFFP
-
Change out O-Ring seal and install lid
-
Take external photo of compliant ABFFP
-
Did the A-FFP hold pressure?
-
If no, record details
-
Update the NDF245 v1.3. Record the tubes tested as zero. In the 'Record any blockages' section please make a note that only the A-FFP was tested
