Title Page
-
Document Number
-
Location
-
Conducted on
-
Prepared by
General Building Inspection
Walkthrough
-
What kind of walk through was completed for this inspection?
-
Proceed to sections 3 and 4.
A Building Visual Inspection
-
Water Main
-
Record Pressure Level
-
Look for any leaking joints or weeping pipes and the pressure levels do not exceed parameters.
-
Clock Room
-
Listen for irregularities in the hum of the transformer, ensure all breaks are in their default (non-tripped) positions.
-
Old Main Entrance
-
Ensure the door is closed and the alarm is toggled to armed. Do not jiggle the door.
-
Coat Room
-
Listen for irregularities in the hum of the transformer, ensure all breaks are in their default (non-tripped) positions.
-
Ice Machine
-
Check flow levels and ice quality. Verify water filter date is within parameters. Check drain speed, flush with hot water as needed.
-
Reverse Osmosis Water Machine
-
Check flow levels, ensure both hot and cold water can be dispensed.
-
Faux Coffee Machine
-
Check for proper flow and dispensing.
-
IT Closet Condensate Drain Line
-
This is located in the "Imagination Station", check to verify the drain line remains unclogged.
-
Men's Bathroom
-
Check for clogged toilets, backed up sinks, low pressure flushes or faucets, and lighting issues.
-
Women's Restroom
-
Check for clogged toilets, backed up sinks, low pressure flushes or faucets, and lighting issues.
-
Compactor
B Building - 1st Floor
-
Fitness Room Equipment
-
Visually inspect the equipment for broken parts, frayed cables, and torn upholstery.
-
Fitness Room Water Machine
-
Check for proper flow and dispensing.
-
Blinds
-
Check for missing blades and proper open and close operation.
-
Elevator Room
-
Check for unusual smells, trash, and tools; ensure the elevator mechanical room key is on the peg.
-
Compactor
-
Mothers Room
-
Check for lighting issues, faucet operations, and cleanliness.
-
Water Heater
-
Check pilot light indicator, tank temperature and pressure, signs of any leaking at the joints or pipes weeping, and cleanliness of the room.
-
Men's Bathroom
-
Check for clogged toilets, backed up sinks, low pressure flushes or faucets, and lighting issues.
-
Women's Bathroom
-
Check for clogged toilets, backed up sinks, low pressure flushes or faucets, and lighting issues.
B Building - 2nd Floor
-
Water Heater
-
Check pilot light indicator, tank temperature and pressure, signs of any leaking at the joints or pipes weeping, and cleanliness of the room.
-
Men's Bathroom
-
Check for clogged toilets, backed up sinks, low pressure flushes or faucets, and lighting issues.
-
Women's Bathroom
-
Check for clogged toilets, backed up sinks, low pressure flushes or faucets, and lighting issues.
-
Ice Machine
-
Check flow levels and ice quality. Verify water filter date is within parameters. Check drain speed, flush with hot water as needed.
-
Reverse Osmosis Water Machine
-
Check flow levels, ensure both hot and cold water can be dispensed.
-
Faux Coffee Machine
-
Check for proper flow and dispensing.
-
AHU #6
-
Verify operation, panel amperage and frequency within normal levels, no unusual sounds or smells, general room cleanliness.
-
AHU #7
-
Verify operation, panel amperage and frequency within normal levels, no unusual sounds or smells, general room cleanliness.
C Building
-
Data Center
-
Check the CRACK units, floor panelling, and condensate drain lines.
-
Generator Room
-
Check general room cleanliness, engine readings, verify standard panel settings, check day tank fuel levels.
Rooftops
-
RTU #1
-
Check belts, flywheels, condensate drain line and drip pan, condenser coils, and compressor lines for any signs of wear, tear, damage, or weeping.
-
RTU #2
-
Check belts, flywheels, condensate drain line and drip pan, condenser coils, and compressor lines for any signs of wear, tear, damage, or weeping.
-
RTU #3
-
Check belts, flywheels, condensate drain line and drip pan, condenser coils, and compressor lines for any signs of wear, tear, damage, or weeping.
-
RTU #4
-
Check belts, flywheels, condensate drain line and drip pan, condenser coils, and compressor lines for any signs of wear, tear, damage, or weeping.
-
RTU #5
-
Check belts, flywheels, condensate drain line and drip pan, condenser coils, and compressor lines for any signs of wear, tear, damage, or weeping.
-
RTU #10
-
Check belts, flywheels, condensate drain line and drip pan, condenser coils, and compressor lines for any signs of wear, tear, damage, or weeping.
-
RTU #11
-
Check belts, flywheels, condensate drain line and drip pan, condenser coils, and compressor lines for any signs of wear, tear, damage, or weeping.
-
RTU #12
-
Check belts, flywheels, condensate drain line and drip pan, condenser coils, and compressor lines for any signs of wear, tear, damage, or weeping.
-
RTU #13
-
Check belts, flywheels, condensate drain line and drip pan, condenser coils, and compressor lines for any signs of wear, tear, damage, or weeping.
-
RTU #14
-
Check belts, flywheels, condensate drain line and drip pan, condenser coils, and compressor lines for any signs of wear, tear, damage, or weeping.
-
RTU #15
-
Check belts, flywheels, condensate drain line and drip pan, condenser coils, and compressor lines for any signs of wear, tear, damage, or weeping.
-
RTU #16
-
Check belts, flywheels, condensate drain line and drip pan, condenser coils, and compressor lines for any signs of wear, tear, damage, or weeping.
Generator Room
Generator Room
-
Does the room pass visual inspection?
-
Check for debris, trash, dust, and dirt around and on the generators.
Battery String C
-
Does the battery string pass visual inspection?
-
Is there currently a heater ensuring the wet cells do not freeze?
-
Is the heater operating within normal parameters?
Generator 1
-
Does this unit pass visual inspection?
-
Check the oil filters, hoses, exterior filters, stacks, and belts.
-
Was a test run completed this week?
-
Ending Running Hours
-
Jacket Temperature
-
Oil Pressure
Generator 2
-
Does this unit pass visual inspection?
-
Check the oil filters, hoses, exterior filters, stacks, and belts.
-
Was a test run completed this week?
-
Ending Running Hours
-
Jacket Temperature
-
Oil Pressure
Day Tank / ITMS
-
Printed Read-out?
-
Was a test run completed this week?
-
Starting Fuel Level
-
Ending Fuel Level
UPS and Power Systems
ATS
-
Do all transfer switches pass visual inspections?
UPS #1
-
Does This unit pass visual inspection?
-
Input VAC
-
Output VAC
-
DC Reading
-
Amp Load
UPS #2
-
Does This unit pass visual inspection?
-
Input VAC
-
Output VAC
-
DC Reading
-
Amp Load
PDU Readings
A
-
Was there readings taken during this inspection?
-
Any alarms present?
-
X
-
Y
-
Z
-
N
-
KVA
-
KW
B
-
Was there readings taken during this inspection?
-
Any alarms present?
-
X
-
Y
-
Z
-
N
-
KVA
-
KW
C
-
Was there readings taken during this inspection?
-
Any alarms present?
-
X
-
Y
-
Z
-
N
-
KVA
-
KW
D
-
Was there readings taken during this inspection?
-
Any alarms present?
-
X
-
Y
-
Z
-
N
-
KVA
-
KW
F
-
Was there readings taken during this inspection?
-
Any alarms present?
-
X
-
Y
-
Z
-
N
-
KVA
-
KW
