12. Proplumb Solar Check List.

• Audit Title

• Document No.

• Client / Site

• Conducted on

  Date

• Prepared by

• Location
  Address

• Personnel

• Have you filled out the Proplumb Risk Assessment form?

  Yes

  No

  N/A

Onsite Checks.

• Is the site free from damage or vandalism?

  Yes

  No

  N/A

• Have you checked that the north arrow on the plan is correct?

  Yes

  No

  N/A

• Is the solar panels installed between 70deg West & 50deg east of north?

  Yes

  No

  N/A

• Will the solar panels be free from shade between 9am and 4pm?

  Yes

  No

  N/A

• Will the solar panels have a minimum inclination of 10 deg? (roof pitch)

  Yes

  No

  N/A

• Is the spouting free of dents and scratches where you have been working?

  Yes

  No

  N/A

• Have you installed the solar panels in the exact location on plan?

  Yes

  No

  N/A

• Has TOT/Mirror paste been used on all brass olive joints and tightened sufficiently?

  Yes

  No

  N/A

• Are all Z brackets tightened to rail and secured through panel?

  Yes

  No

  N/A

• Have you opened the bleed valve cap 2 full turns?

  Yes

  No

  N/A

• Has the correct armor flex been used on all flow and return lines?

  Yes

  No

  N/A

• Is the roof free of mud, debris, offcuts, etc?

  Yes

  No

  N/A

• Have you checked that all damaged roof tiles have been replaced and that the roof is watertight?

  Yes

  No

  N/A

• Is there any spare roof tiles left on site after you have replaced the damaged tiles?

  Yes

  No

  N/A

• Has the sensor wire been run and tied off to a roof truss to protect the terminal joint?

  Yes

  No

  N/A

• Are all armor flex lines strait, clipped and armor flex joins taped neatly with black duct tape?

  Yes

  No

  N/A

• Have you checked that the flow and return lines do not pass through a man hole or over an exhaust fan?

  Yes

  No

  N/A

• Is all pipework in tight against the frame and not bulging out into the cavity?

  Yes

  No

  N/A

• Have you positioned the flow and return lines out the wall in accordance to the manufacturers or particular builders requirements?

  Yes

  No

  N/A

• Are all flow and return lines clear of touching any plastic pipework or wiring?

  Yes

  No

  N/A

• Have you pressurised the the entire solar system including flow and return lines?

  Yes

  No

  N/A

• Have you drained the system after testing?

  Yes

  No

  N/A

• Has the UV rated armor flex been left long and taped back on its self to cover any sharp edges?

  Yes

  No

  N/A

• Has the sensor wire been ran out with the flow line and taped off in a bundle?

  Yes

  No

  N/A

• Has all rubbish been disposed of as per builders specific requirements?

  Yes

  No

  N/A

• The above information is true and correct.

  Sign