Information
-
Job No.
-
Audit Title
-
Client / Site
-
Conducted on
-
Prepared by
-
Location
-
Personnel
Visual Inspection
-
Are all decals are legible and in place?
-
Are the operators and safety manuals are located on the platform?
-
The batteries are fully charged (Charge if required before using)
-
Is the inspection certificate is in date?
Check the following components or areas for damage, improperly installed or missing parts, and authorised modification.
-
Electrical components, wiring and electrical cables
- good condition
- signs of wear
- damaged/ Unsafe
-
Hydraulic hoses, fittings, cylinders and manifolds (Add oil if required)
- good condition
- signs of wear
- damaged/ Unsafe
-
Drive and turntable motors and torque hubs
- good condition
- signs of wear
- damaged/ Unsafe
-
Boom wear pads
- good condition
- signs of wear
- damaged/ Unsafe
-
Dents or damage to the machine e.g. cracked welds.
- good condition
- signs of wear
- damaged/ Unsafe
-
Tyres and wheels (Inflate if required)
- good condition
- signs of wear
- damaged/ Unsafe
-
Limit switches, alarms, horn and beacons.
- good condition
- signs of wear
- damaged/ Unsafe
-
Nuts, bolts and other fasteners.
- good condition
- signs of wear
- damaged/ Unsafe
-
Platform entry mid-level
- good condition
- signs of wear
- damaged/ Unsafe
-
Component covers are in place and latched.
- good condition
- signs of wear
- damaged/ Unsafe
-
Check battery for fluid leaks and fluid levels (Add distiller water if needed)
- good condition
- signs of wear
- damaged/ Unsafe
-
Both battery packs are in place and properly connected.
- Yes
- No
- N/A
Operational Inspection (Using the ground controls test)
-
The beacon works when you switch on the machine (*if fitted)
-
The emergency stop button works and nothing else works when it has been pressed.
-
Operate each boom function in both directions to ensure their correct operation.
-
Operate the tilt sensor by pushing it - the horn should sound
Operational Inspection (Using the platform controls test)
-
Check the mid-rail bar is in position
-
Check that your lanyard is securely attached to the platforms anchor ring.
-
Check the emergency stop button works, and nothing else does when it has been pressed.
-
Check the horn works.
-
Check the warning lights work.
-
Check that the controls won't operate without the foot switch being pressed.
-
Check each boom functions in both directions to ensure their correct operation.
-
Check in low speed that the steering operates correctly.
-
Check in low speed that the steering operated correctly.
-
Check in low speed that the drive and breakers operate correctly.
-
Check in high speed that the drive and breaks operate correctly.
-
Check the drive speed limiter engages when the platform is raised.
-
If you find any defect in the lifting platform, do not use it. Isolate it, tag it and report it to your line manager.
-
Engineer signature: