Title Page
-
Job Name
-
Job Number
-
Client / Site
-
Conducted on
-
Prepared by
-
Location
-
Foreman
-
1. Confirm bench mark, layout and ceiling heights as needed with GC.
-
Responsible Party
-
PCI Personnel Responsible For Correction?
-
Date Corrected?
-
2. If deviating from drawings, GC to sign off on change before proceeding.
-
Responsible Party
-
PCI Personnel Responsible For Correction?
-
Date Corrected?
-
3. Wires within 15 degrees of plumb and free from obstacles (check specs) if over degree tolerance install counter splayed wire.
-
Responsible Party
-
PCI Personnel Responsible For Correction?
-
Date Corrected?
-
4. Grid level within 1/8” in 12’.
-
Responsible Party
-
PCI Personnel Responsible For Correction?
-
Date Corrected?
-
5. Grid cut-in straight.
-
Responsible Party
-
PCI Personnel Responsible For Correction?
-
Date Corrected?
-
6. Grid not cut short, specifically at angled walls.
-
Responsible Party
-
PCI Personnel Responsible For Correction?
-
Date Corrected?
-
7. Black iron bridging utilized, no attachment to MEP’s.
-
Responsible Party
-
PCI Personnel Responsible For Correction?
-
Date Corrected?
-
8. Black iron doubled over five feet.
-
Responsible Party
-
PCI Personnel Responsible For Correction?
-
Date Corrected?
-
9. Ensure grid is square when grid installation starts. (Not after completion)
-
Responsible Party
-
PCI Personnel Responsible For Correction?
-
Date Corrected?
-
10. Wires wrapped 3 times in 1 inch (hospital wrap) or 3 times within 3” and installed 4’ OC in each direction.
-
Responsible Party
-
PCI Personnel Responsible For Correction?
-
Date Corrected?
-
11. Remove jet line after grid installation.
-
Responsible Party
-
PCI Personnel Responsible For Correction?
-
Date Corrected?
-
12. Use clean white pop rivets (where specs require).
-
Responsible Party
-
PCI Personnel Responsible For Correction?
-
Date Corrected?
-
13. Hang additional wires at back to back light fixtures or other heavy devices.
-
Responsible Party
-
PCI Personnel Responsible For Correction?
-
Date Corrected?
-
14. Grid and wall angle to be free of fingerprints and smudges.
-
Responsible Party
-
PCI Personnel Responsible For Correction?
-
Date Corrected?
-
15. Wall angle miters to be clean. Extra care taken on 2 inch wall angle.
-
Responsible Party
-
PCI Personnel Responsible For Correction?
-
Date Corrected?
Corrective Actions
-
Enter any corrective actions that will be undertaken
-
Responsible Party?
-
PCI Personnel Responsible for correction.
-
Select date
-
Enter any corrective actions that will be undertaken
-
Responsible Party?
-
PCI Personnel Responsible for correction.
-
Select date
-
Enter any corrective actions that will be undertaken
-
Responsible Party?
-
PCI Personnel Responsible for correction.
-
Select date
-
Conducted By:
-
Reviewed By: