Drywall All Surfaces - duplicate

Title Page

Job Name
Job Number
Client / Site
Conducted on
Prepared by
Location
Foreman

1. Clean at base of wall to ensure caulking adhesion and to prevent bows at base.
Responsible Party
PCI Personnel Responsible For Correction?
Date Corrected?
2. Hang rated, priority or interference walls first.
Responsible Party
PCI Personnel Responsible For Correction?
Date Corrected?
3. Prior to drywall hang on partitions, identify the appropriate hanging procedures (i.e. hold drywall ¼” off floor).
Responsible Party
PCI Personnel Responsible For Correction?
Date Corrected?
4. Stand-up board wherever possible to minimize joints.
Responsible Party
PCI Personnel Responsible For Correction?
Date Corrected?
5. Verify 8” on center screw spacing 3/8” from edge of board at perimeter.
Responsible Party
PCI Personnel Responsible For Correction?
Date Corrected?
6. Verify screw spacing in the field is per local code or 12” O.C. minimum.
Responsible Party
PCI Personnel Responsible For Correction?
Date Corrected?
7. Verify that all drywall is secure to the framing.
Responsible Party
PCI Personnel Responsible For Correction?
Date Corrected?
8. Verify drywall overlap, staggered or off set joints occurs at multiple layer rated assemblies.
Responsible Party
PCI Personnel Responsible For Correction?
Date Corrected?
9. Verify HM door frames are square, level and king studs are screwed properly during drywall install.
Responsible Party
PCI Personnel Responsible For Correction?
Date Corrected?
10. Cut out all electrician boxes, plumbing, HVAC openings and access doors.
Responsible Party
PCI Personnel Responsible For Correction?
Date Corrected?
11. Verify that all inside corners are snug, not forced.
Responsible Party
PCI Personnel Responsible For Correction?
Date Corrected?
12. Hold drywall back ¼” where L bead is required.
Responsible Party
PCI Personnel Responsible For Correction?
Date Corrected?
13. Verify that drywall on soffits and doors are hung correctly to prevent cracking.
Responsible Party
PCI Personnel Responsible For Correction?
Date Corrected?
14. Eliminate “butt” joints whenever possible on ceilings and walls.
Responsible Party
PCI Personnel Responsible For Correction?
Date Corrected?
15. Verify that all caulking at bottom of the drywall is wiped clean.
Responsible Party
PCI Personnel Responsible For Correction?
Date Corrected?
16. Mark on floor prior to hanging, the locations of all boxes and switches and make sure all marks are cut out at walls and ceilings.
Responsible Party
PCI Personnel Responsible For Correction?
Date Corrected?
17. Verify that “belly bands” do not occur.
Responsible Party
PCI Personnel Responsible For Correction?
Date Corrected?
18. Verify that drywall screws are driven within tolerance (not over or under driven).
Responsible Party
PCI Personnel Responsible For Correction?
Date Corrected?
19. “Misses” - Do not leave screws that have missed the studs protruding from the surface of the drywall.
Responsible Party
PCI Personnel Responsible For Correction?
Date Corrected?
20. Do not install damaged drywall. Cut-out all “fractured” drywall and replace.
Responsible Party
PCI Personnel Responsible For Correction?
Date Corrected?
21. Verify that no screws have been installed in no-screw zone near plumbing.
Responsible Party
PCI Personnel Responsible For Correction?
Date Corrected?