Title Page
-
Conducted on
DETAILS
-
Client / Site: Barwon Water - Black Rock WRP Inlet Works Upgrade 400 Black Rock Connewarre
-
Inspection Area:
-
Reference: BW Technical Specification Rev 0 Clause: 38.18 Cable Ladder and Cable Tray 38.25 Earthing
-
Document No. CA-CS-008 ITP No:
VISUAL CHECKLIST
-
Marine grade aluminium
-
GRP
-
316 Stainless steel
-
Adequate support on galvanised steel brackets minimum 6 mm thickness
-
Adequate supports at not more than 2mt centres and intermediate supports at joints
-
Adequate supports spaced such that the loaded cable tray and ladders does not deflect more than 5mm
-
Segregation of dissimilar metals using 3mm insulating spacers
-
All cable trays and ladder fittings, brackets, bolts, nuts, and washers shall be hot dipped galvanised steel and shall match the cable tray and ladder in use
-
Where cable trays and ladders have been cut or damaged during erection, the resulting exposed metal shall be cold galvanised treated and suitable painted to prevent corrosion
-
Mounted to maintain 300mm clearance between racks vertically and at least 150mm under structural sections
-
Cable ladder earthed to the electrical enclosure they originate from or to a metal structure that is earthed
-
Adequate size to provide 50% spare capacity
-
All ladder bends, both horizontal and vertical shall have a minimum radius of 450mm for power and control cables
-
Cable ladder expansion joints installed as per manufacturers requirements
-
Barrier Strip installed / segregation provided
-
Cables laid in cable ladder and trays, shall be arranged to minimise cross-overs
-
Secured at frequent intervals by means of approve metal cable straps of adequate side and strength for the cables involved <br><br>Cables tied at suitable intervals on ladder
-
All cable ties flush cut to eliminate harp edges
-
Installation neat and evenly spaced
-
Where cables may be exposed to UV or subject to mechanical damage, peaked covers of similar material shall be clamped to the ladder
-
Installation does not impede access to walkways
-
Notes/Comments
APPROVALS
-
Cable Tray Installation is
-
Actions to be taken:
-
Entered on Punch List
-
Punch list Reference Number:
-
Item No:
-
Person Completing the Checklist
- Greg Grima
- John Toner
- Shane Dando
- David Howard
-
Signature:
-
Agfab Approval By:
- Greg Grima
- John Toner
- Shane Dando
- David Howard
-
Signature: