Conveyor Quality Checklist

• Job Number

• Module

• Date

  Date

• Conveyor Type

  Heavies

  PS

  DS

  Belt Feeder

Documentation

• Have you received a Kit List? If No, inform Supervisor or Team Leader

  Yes

• Have tails been fitted to the motors? If No, inform Supervisor to notify AW

  Yes

• Has the QC inspected the Drive Systems supplied is as per the Kit List?

  Yes

• Have you received SOP training for this task?

  Yes

  No

• Have you read and understood the RAMS for this task?

  Yes

  No

• Please sign

  Sign

• Bolt Length Correct & Bolts Tight

  Yes

  N/A

• Impact Section in correct position (See drawing) All bolts tight, and Spacing correct

  Yes

  N/A

• Eye bolts fitted for emergency stop pull cords (Picking Station)

  Yes

  N/A

• If a Magnet Section is applicable check all relative parts are Stainless Steel as per drawing

  Yes

  N/A

• Drive drum bench checked by QC prior to installation

  Yes

• Drive drum set to correct level

  Yes

• Conveyor Belt and joint quality / Width is correct

  Yes

• Bearing grub screws torqued and marked (See table)

  Yes

• Insert photographs of Impact Sections and Belt Support Plates

  Media

• Please sign

  Sign

• Impact section

  Yes

  N/A

• Magnet section

  Yes

  N/A

• Drive drum bench and drum taper locks

  Yes

  N/A

• Drums are level with impact bars or belt supports

  Yes

  N/A

• Knee joint snub drum alignment with load roller correct

  Yes

  N/A

• Bearing grub screws torqued and marked

  Yes

  N/A

• Please sign

  Sign

• Conveyor Belt and joint quality / Width is correct

  Yes

  N/A

• If chevron belt, are they going the correct way

  Yes

  N/A

• Check belt direction- Inside joint line to drive drum first

  Yes

  N/A

• Safety and ID Stickers positioned - photograph both sides

  Media

• Please sign

  Sign

• Drive motor / gearbox on correct side of the conveyor

  Yes

  N/A

• Gearbox retaining washer and safety bolt fitted and tightened

  Yes

  N/A

• Gearbox fitted in the correct position for the conveyor angle

  Yes

  N/A

• Check Belt tension / Enough adjustment

  Yes

  N/A

• Return rollers fitted and locked

  Yes

  N/A

• All skirting rubbers fitted as per measurement (90mm)

  Yes

  N/A

• All bolts correct length and tight (See drawing)

  Yes

• Deflector kit fitted

  Yes

  N/A

• Belt scraper fitted in correct position / Tensioned

  Yes

  N/A

• Auto greasers fitted / Setting is zero at this time

  Yes

  N/A

• Please Sign

  Sign

• All nip point guards are fitted

  Yes

• Please Sign

  Sign

• Belt alignment correct on drive / tail drums and in middle of conveyor

  Yes

  N/A

• There are no abnormal noises / vibrations whilst running

  Yes

  N/A

• Motor temperature / movement is within acceptable limits

  Yes

  N/A

• Skirting rubbers are not sticking to the belt / not too tight

  Yes

  N/A

• Serial No. plate is fitted / Information correct / correct position

  Yes

• Insert Serial No.

• Amps

  Media

• Belt Speed

  Media

• Please Sign

  Sign

• Feedboots fitted

  Yes

  N/A

• Chutes fitted

  Yes

  N/A

• Please sign

  Sign

• Feedboots and Chutes fitted

  Yes

  N/A

• Are all Decals positioned

  Media

• Please Sign

  Sign

• Is the conveyor complete?

  Yes

  No