Title Page
-
Site conducted
-
Conducted on
-
Auditor
-
Site
-
Gate Number
-
Gate Number
-
Gate Number
-
Gate Number
-
Gate Number
-
Gate Number
-
Gate Number
-
Gate Number
-
Tail Number
- N1013A
- N1049A
- N1093A
- N1181A
- N1229A
- N1321A
- N1327A
- N1361A
- N1373A
- N1381A
- N1399A
- N1409A
- N1427A
- N1439A
- N1487A
- N1489A
- N1499A
- N1709A
- N1997A
- N227AZ
- N229AZ
- N233AZ
- N239AZ
- N241AZ
- N307AZ
- N311AZ
- N313AZ
- N317AZ
- N331AZ
- N337AZ
- N347AZ
- N353AZ
- N359AZ
- N367AZ
- N379AZ
- N381AN
- N389AZ
- N397AZ
- N409AZ
- N419AZ
- N431AZ
- N432AX
- N433AZ
- N443AZ
- N449AZ
- N457AZ
- N459AZ
- N479AZ
- N491AZ
- N499AZ
- N5113A
- N5147A
- N5153A
- N5167A
- N5179A
- N5209A
- N5227A
- N5233A
- N5237A
- N5261A
- N5479A
- N5683A
- N5693A
- N617AZ
- N641AZ
- N714AX
- N739AX
- N744AX
- N749AX
- N750AX
- N761CX
- N762CX
- N763CX
- N768AX
- N774AX
- N7901A
- N7907A
- N7919A
- N791AX
- N7933A
- N7949A
- N795AX
- N8011A
- N8059A
- N919AZ
- N929AZ
- N937AZ
- N947AZ
- N967AZ
-
Please observe a minimum of 3 observations when answering the below questions (as applicable)
GSE
-
Associates on air stairs perform eight (8) foot safety stop (AGOM 3.4.8)
-
Wheels on the K-loader are straight while pulling up and parked at the plane (AGOM 3.4.10.2)
-
When not in use, belt loader is pulled back eight (8) feet from plane, belt lowered, turned off, and chocked (AGOM 3.4.9)
-
Seatbelts used when operating all GSE equipment (AGOM 3.4.3)
- All operators compliant
- One operator non-compliant
- More than one operator non-compliant
- N/A
-
Unattended GSE in safety envelope must be in neutral, parking brake applied, wheels chocked/stabilizers down with engine off (exception if temp is <32 degrees engine stays on in cold weather stations) (AGOM 3.4.6)
- All operators compliant
- One operator non-compliant
- More than one operator non-compliant
- N/A
-
All marshalling duties must be performed until clear of the safety envelope (AGOM 3.7.2)
- All operators compliant
- One operator non-compliant
- More than one operator non-compliant
- N/A
-
Sample at least 2 GSE Checklists and answer the following questions
-
Perform and document the GSE Pre-Trip Operator Checklist prior to initial GSE use and the GSE Post-Trip Operator Checklist after operating the GSE (AGOM 3.4.5)
- All operators compliant
- One operator non-compliant
- More than one operator non-compliant
- N/A
-
Which GSE did you sample?
- Cargo Loader
- Belt Loader
- Cargo Tractor
- Air Stairs
- Pushback
- GPU
- Air Start
-
Which GSE did you sample?
- Cargo Loader
- Belt Loader
- Cargo Tractor
- Air Stairs
- Pushback
- GPU
- Air Start
-
Which GSE did you sample?
- Cargo Loader
- Belt Loader
- Cargo Tractor
- Air Stairs
- Pushback
- GPU
- Air Start
-
Additional comments/observations