Heggem-Lundquist Paint QC

• HL Job Number

• Job Site Name

• Conducted on

  Date

• HL QAQC Inspector

• Job Site Area of QAQC Inspection

Spray Paint

• Confirm for updated drawings, RFI's, plans & specs

  Yes

  No

  N/A

• Have all draw-downs been submitted and approved

  Yes

  No

  N/A

• If precast or concrete, does the substrate need to be power washed

  Yes

  No

  N/A

• Confirm that all items not to receive paint have been protected from overspray

  Yes

  No

  N/A

• Confirm that duct work or any other form of air movement has the correct filters installed to reduce fume transfer

  Yes

  No

  N/A

• Are all surfaces free of rust, stains, fireproofing, or anything else that may cause a flaw to the finish surface

  Yes

  No

  N/A

• Confirm that all substrates are at the correct temperature to receive material

  Yes

  No

  N/A

• Confirm that all substrates are not wet or contain too much moisture

  Yes

  No

  N/A

• Do all sprayed surfaces have a uniform finish

  Yes

  No

  N/A

• Is the wind calm enough not to cause overspray to carry a distance

  Yes

  No

  N/A

• Have all trades either moved or protected their stored materials from overspray

  Yes

  No

  N/A

• Are all MEP's complete before spray

  Yes

  No

  N/A

• Have sprinkler heads been protected from spray

  Yes

  No

  N/A

• Have smoke detectors been protected from spray

  Yes

  No

  N/A

• Confirm the paint is the correct product from the correct manufacturer

  Yes

  No

  N/A

• Are all coatings applied to the correct MIL thickness

  Yes

  No

  N/A

• If precast or concrete, is the pH level at an acceptable range

  Yes

  No

  N/A

• Have all protection materials (i.e. tape, plastic, foil) been removed from items that were being protected (i.e. hinges, convectors, sprinkler heads)

  Yes

  No

  N/A

• Look for imperfections before the architect creates the punch list

  Yes

  No

  N/A

• Confirm clean-up of our material and scrap

  Yes

  No

  N/A

• Did you walk and inspect the job site with the G.C.

  Yes

  No

  N/A

• Yes

  No

  N/A

Paint Brush & Roll

• Confirm for updated drawings, RFI's, plans & specs

  Yes

  No

  N/A

• Have all draw-downs been submitted and approved

  Yes

  No

  N/A

• Confirm that the taping quality is ready for paint prior to finish coat

  Yes

  No

  N/A

• Do any walls receive a level 5 finish

  Yes

  No

  N/A

• Have all MEP trades completed their work (including any demo and re-installation)

  Yes

  No

  N/A

• Were all drywall patches sanded

  Yes

  No

  N/A

• Were drywall patches spot primed

  Yes

  No

  N/A

• Confirm the ceiling and floor base heights are finish taped to the right height

  Yes

  No

  N/A

• Is the lighting adequate to install the finish coat

  Yes

  No

  N/A

• Are all trades complete before the installation of any specialty finishes

  Yes

  No

  N/A

• After applying the finish coat, are all walls free from damage

  Yes

  No

  N/A

• Do all surfaces have a uniform finish

  Yes

  No

  N/A

• Have you walked the project looking for imperfections prior to the architect creating a punch list

  Yes

  No

  N/A

• Confirm clean-up of our material and scrap

  Yes

  No

  N/A

• Did you walk and inspect the job site with the G.C.

  Yes

  No

  N/A

• Comments

• HL QC Inspector

  Sign