Mine Site Safety Inspection

• Client / Site

• Audit Title

• Conducted on

  Date
• Location
  Address

• Personnel

• Prepared by

• Document No.

PART 46: TRAINING

• New miners must receive 24 hrs of training per paragraphs b-d (including 4 hours minimum before beginning work at the mine)

  Safe

  At Risk

  N/A

• Develop & implement a written training plan (site-specific)

  Safe

  At Risk

  N/A

• Newly hired experienced miners must receive site-specific training prior to beginning work at the mine

  Safe

  At Risk

  N/A

• Annual refresher training of 8 hrs is required (verify that all miners are current)

  Safe

  At Risk

  N/A

• Maintain signed, written Form 5000-23 records of all miner training, and provide a copy to miner upon completion of training

  Safe

  At Risk

  N/A

• Employees must be paid for training, including mileage, meals, and any lodging incurred

  Safe

  At Risk

  N/A

• Site specific hazard awareness training is required before anyone is exposed to mine hazards (includes office/management staff, visitors, QC, delivery workers, service/repair persons, etc. unless always accompanied by an experienced miner)

  Safe

  At Risk

  N/A

• Operator must provide site-specific hazard awareness training to independent contractors

  Safe

  At Risk

  N/A

PART 47: HAZCOM

• All containers of hazardous materials must be properly labeled

  Safe

  At Risk

  N/A

• Must have an SDS for each hazardous chemical produced or used

  Safe

  At Risk

  N/A

• SDS must be kept onsite or readily available to miners in an emergency

  Safe

  At Risk

  N/A

• Must retain SDS as long as hazardous chemical is at the mine, and must notify miners at least 3 months before disposing of the MSDS

  Safe

  At Risk

  N/A

• Miners must receive Hazcom training

  Safe

  At Risk

  N/A

• Develop, implement, and maintain a written Hazcom program per section 47.32

  Safe

  At Risk

  N/A

PART 50: REPORTING ACCIDENTS, INJURIES, ILLNESSES

• Operator must maintain accident investigation reports required by 50.11 for 5 years after occurrence

  Safe

  At Risk

  N/A

• Operator must investigate all accidents and injuries and submit report to MSHA

  Safe

  At Risk

  N/A

• Operator may not alter accident site until MSHA has completed its investigation

  Safe

  At Risk

  N/A

• Operator must complete Form 7000-1 and mail to MSHA within 10 working days after an accident or injury

  Safe

  At Risk

  N/A

• Quarterly employment & production reports (Form 7000-2) must be filed within 15 days after end of each calendar quarter, and be maintained for 5 years

  Safe

  At Risk

  N/A

• Operator must maintain 7000-1 and 7000-2 reports for 5 years after submission

  Safe

  At Risk

  N/A

• Must notify MSHA within 15 minutes of an accident

  Safe

  At Risk

  N/A

PART 56A: NOTIFICATION

• Must notify local MSHA district office prior to starting operations

  Safe

  At Risk

  N/A

PART 56B: GROUND CONTROL

• Must maintain wall, bank, and slope stability in places where persons work or travel

  Safe

  At Risk

  N/A

• Must correct fall-of-material hazards at or near the perimeter of the pit wall; loose or unconsolidated material must be sloped or stripped at least 10' from top of pit wall

  Safe

  At Risk

  N/A

• Ground conditions that create hazards must be corrected before work or travel allowed; until corrected, area must be posted w/warning signs and barriered

  Safe

  At Risk

  N/A

• An experienced person must examine ground conditions prior to beginning work, after blasting, and as ground conditions warrant

  Safe

  At Risk

  N/A

• Scaling must be performed in an area that does not expose persons to injury from falling material

  Safe

  At Risk

  N/A

• Persons shall not work between machinery/equipment and the highwall or bank (where escape from falls/slides would be hindered)

  Safe

  At Risk

  N/A

PART 56C: FIRE PREVENTION & CONTROL

• Abandoned electrical circuits must be deenergized and isolated to prevent becoming inadvertently energized

  Safe

  At Risk

  N/A

• No smoking or use of flame allowed where flammable or combustible liquids, greases, or gases are used, stored, or handled

  Safe

  At Risk

  N/A

• Visible warning signs prohibiting smoking and open flames must be posted where fire or explosion hazard exists

  Safe

  At Risk

  N/A

• Flammable liquid spillage or leakage must be timely removed to prevent a fire hazard

  Safe

  At Risk

  N/A

• Engines must be switched off prior to refueling (N/A to diesel-powered equipment)

  Safe

  At Risk

  N/A

• Waste materials and liquids shall not accumulate in qtys that could create fire hazard

  Safe

  At Risk

  N/A

• Until disposed, flammable waste & rags shall be placed in covered metal containers

  Safe

  At Risk

  N/A

• No combustible materials shall be stored or accumulate within 25' of electric substations, flammable liquid storage tanks, or any containers storing over 60 gals of flammable liquids

  Safe

  At Risk

  N/A

• The area within the 25' perimeter shall be kept free from dry vegetation

  Safe

  At Risk

  N/A

• Each mine site shall have onsite fire fighting equipment, strategically located, readily accessible, plainly marked, maintained in fire-ready condition

  Safe

  At Risk

  N/A

• Fire extinguishers shall be visually inspected at least once per month, and professionally maintained at least once per year

  Safe

  At Risk

  N/A

• Certified records of each inspection shall be maintained for one year or until retested

  Safe

  At Risk

  N/A

• Fire hydrants shall be equipped with uniform fittings for firefighting, readily available wrenches and adapters/fittings for firefighting

  Safe

  At Risk

  N/A

• Fire extinguishers shall be recharged or replaced promptly after any discharge

  Safe

  At Risk

  N/A

• A fire extinguisher shall be provided on self-propelled equipment (or within 100' if fire would not impede escape)

  Safe

  At Risk

  N/A

• Operator shall establish emergency firefighting, evacuation, and rescue procedures

  Safe

  At Risk

  N/A

• Emergency firefighting drills shall be held at least once every 6 months

  Safe

  At Risk

  N/A

• Flammable liquids shall not be used for cleaning

  Safe

  At Risk

  N/A

• Solvents shall not be used near an open flame, ignition source, heat source, or in any atmosphere that can elevate the temp of the solvent above its flash point

  Safe

  At Risk

  N/A

• Fixed, flammable liquid storage tanks shall be securely mounted on firm foundations

  Safe

  At Risk

  N/A

• Small quantities of flammable liquids shall be kept in safety cans labeled with its contents

  Safe

  At Risk

  N/A

• Storage tanks (including piping, valves, fittings) for flammable liquids shall be capable of withstanding pressures, maintained to prevent leakage, isolated from ignition sources, and properly vented

  Safe

  At Risk

  N/A

• Heat sources shall be separated from combustible materials if a fire hazard could be created

  Safe

  At Risk

  N/A

• Fuel lines shall be equipped with valves capable of stopping fuel flow at the source

  Safe

  At Risk

  N/A

• Battery charging stations: properly ventilated, no smoking or use of open flames, readily visible warning signs posted preventing smoking and open flame use

  Safe

  At Risk

  N/A

• When welding or cutting, an appropriately rated fire extinguisher shall be at the work site

  Safe

  At Risk

  N/A

• Oxygen cylinders shall not be stored in areas designated for storage of flammable liquids

  Safe

  At Risk

  N/A

• Keep gauges and regulators used with oxygen and acetylene cylinders clean and free from oil and grease

  Safe

  At Risk

  N/A

• Valves on oxygen and acetylene cylinders shall be closed when: moved, torch/hoses left unattended, or task is completed

  Safe

  At Risk

  N/A

• Take proper precautions before welding, cutting, or applying heat to pipelines/containers with flammable liquids, gases, or explosive solids

  Safe

  At Risk

  N/A

PART 56D: AIR QUALITY

• Conduct dust, gas, mist, and fume surveys as frequently as necessary to determine adequacy of control measures

  Safe

  At Risk

  N/A

• Control exposure of employees to airborne contaminants (prevention, control measures, respirators, etc.)

  Safe

  At Risk

  N/A

PART 56H: LOADING, HAULING, DUMPING

• Persons shall not get on or off moving mobile equipment

  Safe

  At Risk

  N/A

• Establish and follow rules about speed, ROW, direction of movement, and headlight use; place signs/signals warning of hazardous conditions at appropriate locations

  Safe

  At Risk

  N/A

• Operators of equipment must maintain control while in motion and use safe operating speeds

  Safe

  At Risk

  N/A

• Persons shall not be transported on forks, buckets, beds, top of loads, in overcrowded equipment, or on equip where materials/equip are not secured

  Safe

  At Risk

  N/A

• Equipment/supplies shall be loaded, transported, unloaded in manner to not create a hazard to persons from falling/shifting equipment or supplies

  Safe

  At Risk

  N/A

• Provide berms/guardrails on banks of roadways where a drop-off danger exists

  Safe

  At Risk

  N/A

• Where restricted clearance creates a hazard for equip operators, install advance warning devices and conspicuously mark the restricted area

  Safe

  At Risk

  N/A

• Remove water, debris, or spilled material on roadways that creates hazards to operating equipment

  Safe

  At Risk

  N/A

• Control dust where impaired visibility hazards would exist

  Safe

  At Risk

  N/A

• Persons shall not pass under suspended loads

  Safe

  At Risk

  N/A

PART 56J: TRAVELWAYS

• Provide and maintain safe access to all working places

  Safe

  At Risk

  N/A

• Provide handrails and maintain in good condition all stairways and elevated walkways and ramps

  Safe

  At Risk

  N/A

• Ladders shall be of substantial construction and maintained in good condition

  Safe

  At Risk

  N/A

• Portable rigid ladders shall be securely placed and have suitable bases

  Safe

  At Risk

  N/A

• Fixed ladders shall be anchored securely and installed to provide at least 3' of toe clearance

  Safe

  At Risk

  N/A

• Fixed ladders shall project at least 3' above landings (or substantial handholds provided above the landings)

  Safe

  At Risk

  N/A

• Wooden components of ladders shall not be painted (except with a transparent finish)

  Safe

  At Risk

  N/A

• Restricted clearances shall be conspicuously marked

  Safe

  At Risk

  N/A

• Inclined railed walkways shall be nonskid or provided with cleats

  Safe

  At Risk

  N/A

• Vertical clearance over stair steps shall be 7' minimum (or suitable warnings posted indicating an impaired clearance)

  Safe

  At Risk

  N/A

• Persons using ladders shall face the ladder and have both hands free for climbing/descending

  Safe

  At Risk

  N/A

• Openings above/below/near travelways shall be protected by railings, barriers or covers (or if impractical, adequate warning signals are required)

  Safe

  At Risk

  N/A

• Reguarly used walkways/travelways shall be sanded, salted, or cleared of snow and ice as soon as practicable

  Safe

  At Risk

  N/A

• Fixed ladders shall not incline backwards

  Safe

  At Risk

  N/A

• Scaffolds and working platforms shall be of substantial construction and have handrails; floor boards shall be properly placed and not overloaded

  Safe

  At Risk

  N/A

PART 56K: ELECTRICITY

• Circuits must be protected against overload by fuses or circuit breakers of correct type and capacity

  Safe

  At Risk

  N/A

• Electric equipment and circuits must have approved switches or controls and be of approved design and properly installed

  Safe

  At Risk

  N/A

• Short circuit protection shall be provided for the trailing cables of mobile equipment

  Safe

  At Risk

  N/A

• Conductors shall be of sufficient size and carrying capacity, and shall be protected from mechanical damage

  Safe

  At Risk

  N/A

• Mobile equipment shall not run over power conductors, nor shall loads be dragged over conductors (unless bridged or protected)

  Safe

  At Risk

  N/A

• Distribution boxes shall be provided with a disconnect device for each branch circuit, designed so visual observation shows when circuit is denergized, and box labeled to show which circuit each device controls

  Safe

  At Risk

  N/A

• Power cable connections to junction boxes shall not be made or broken under load

  Safe

  At Risk

  N/A

• Where power wires/cables pass into compartments, they shall be adequately insulated, use only proper fittings (or insulated bushings for insulated wires other than cables)

  Safe

  At Risk

  N/A

• Phone and low voltage wires shall be protected (by isolation or insulation) from contacting energized power conductors or any other power source

  Safe

  At Risk

  N/A

• High potential electrical conductors shall be covered, insulated, or placed to prevent contact with low potential conductors

  Safe

  At Risk

  N/A

• Permanent splices and repairs made to power cables shall be as near as possible to the original as to mechanical strength, insulated, and damage protection

  Safe

  At Risk

  N/A

• Energized power cables in excess of 150 volts shall not be moved unless suitable, insulated protection is provided

  Safe

  At Risk

  N/A

• Electrically powered equipment shall be deenergized before mechanical work is done: power switches locked out, warning notices posted and signed, locks or preventative devices

  Safe

  At Risk

  N/A

• Power circuits shall be deenergized before work is done, suitable warning signs posted, switches locked out, locks or preventative devices used

  Safe

  At Risk

  N/A

• Principal power switches shall be labeled to show which units they control

  Safe

  At Risk

  N/A

• Suitable clearance shall be provided at stationary electrical equipment or switchgear

  Safe

  At Risk

  N/A

• Dry wood platforms, insulating mats, or other nonconductive mat'l shall be in place at all switchboards and power-control switches

  Safe

  At Risk

  N/A

• Danger signs shall be posted at all major electrical installations

  Safe

  At Risk

  N/A

• Areas of major electrical installations shall only be entered by authorized persons

  Safe

  At Risk

  N/A

• Electrical connections that are difficult or impractical to insulate shall be guarded

  Safe

  At Risk

  N/A

• All metal enclosing or encasing electrical circuits shall be grounded

  Safe

  At Risk

  N/A

• Metal fencing and metal buildings enclosing transformers and switchgear shall be grounded

  Safe

  At Risk

  N/A

• Continuity and resistance of grounding systems shall be tested immediately after installation, repair, modification, and annually thereafter; make records available for the inspector upon request

  Safe

  At Risk

  N/A

• When a potentially dangerous condition is found, it shall be corrected before equipment or wiring is energized

  Safe

  At Risk

  N/A

• Keep inspection and cover plates on electrical equipment and junction boxes in place at all times (except during testing or repairs)

  Safe

  At Risk

  N/A

• Hand-held electric tools shall not be operated at high potential voltages

  Safe

  At Risk

  N/A

• Portable lights that pose a shock or burn hazard shall be guarded

  Safe

  At Risk

  N/A

• Lamp sockets shall be waterproof type if exposed to weather or wet conditions that may pose a shock hazard

  Safe

  At Risk

  N/A

• Fuses shall not be removed or replaced in an energized circuit

  Safe

  At Risk

  N/A

• Fuse tongs or hot line tools shall be used when fuses are removed or replaced in high-potential circuits

  Safe

  At Risk

  N/A

• Operating controls shall be installed so they can be operated without danger of contact with energized conductors

  Safe

  At Risk

  N/A

• Switches and starting boxes shall be of safe design and capacity

  Safe

  At Risk

  N/A

• Powerlines and phone circuits shall be protected against short circuits and lightning

  Safe

  At Risk

  N/A

• Transformers shall be totally enclosed

  Safe

  At Risk

  N/A

• Transformer enclosures shall be kept locked against unauthorized entry

  Safe

  At Risk

  N/A

PART 56M: MACHINERY

• ROPS and seat belts shall be installed on: crawler tractors & loaders, graders, wheel loaders & tractors, skid-steer loaders, agri. Tractors, & tractor portion of semi-mounted scrapers/dumpers/water wagons

  Safe

  At Risk

  N/A

• ROPS shall be maintained to meet the mfr performance requirements; if subjected to rollover, shall be re-certified prior to re-use; alterations or repairs only by mfr or authorized engr & shall be recertified

  Safe

  At Risk

  N/A

• Seat belts shall be worn by the equipment operator

  Safe

  At Risk

  N/A

• Seat belts shall be maintained in functional condition, and replaced when necessary to assure proper performance

  Safe

  At Risk

  N/A

• Manually-operated horns or other audible warning devices on self-propelled equip shall be maintained in functional condition

  Safe

  At Risk

  N/A

• When operator has rear obstructed view, equip shall have: 1) automatic reverse-activated signal alarm, 2) wheel-mounted bell alarm, 3) discriminating backup alarm, or 4) an observer to signal safe back up

  Safe

  At Risk

  N/A

• When operator has rear obstructed view, equip shall have alarms audible above the surrounding noise level, or an auto reverse-activated strobe light may be used at night in lieu of audible reverse alarm

  Safe

  At Risk

  N/A

• Before starting crushers or moving self-propelled mobile equip, operators shall sound a warning audible above the surrounding noise level or use other means to warn all persons exposed to a hazard

  Safe

  At Risk

  N/A

• Before starting a conveyor, operator shall visually check to make sure all persons are in the clear (if entire conveyor visible to operator) or shall make audible/visible warning and start conveyor within 30 seconds

  Safe

  At Risk

  N/A

• Pulleys of conveyors shall not be cleaned manually while the conveyor is in motion

  Safe

  At Risk

  N/A

• Belt dressings shall not be applied manually while belts are in motion unless a pressurized applicator is used that allows dressing to be applied outside the guards

  Safe

  At Risk

  N/A

• Machinery or equip shall not be lubricated manually while in motion where application of lubrication may expose persons to injury

  Safe

  At Risk

  N/A

• Machinery, equip, and tools shall not be used beyond the design capacity intended by mfr where such use may create a hazard to persons

  Safe

  At Risk

  N/A

• When moving mobile equip, booms/forks/bucks/beds/similar movable parts shall be positioned in travel mode and, if required for safe travel, mechancially secured

  Safe

  At Risk

  N/A

• When mobile equip is unattended or not in use, dippers/buckets/scraper blades shall be lowered to the ground; other movable parts (i.e. booms) shall be mechanically secured or positioned to prevent movement

  Safe

  At Risk

  N/A

• Mobile equip shall not be left unattended unless controls are placed in park and parking brake is set; when parked on a grade, wheels or tracks shall be either chocked or turned into a bank

  Safe

  At Risk

  N/A

• Visible warning devices shall be used when parked equip creates a hazard to persons in other equipment

  Safe

  At Risk

  N/A

• A properly sized tow bar or other effective means of control shall be used to tow mobile equipment

  Safe

  At Risk

  N/A

• A safety chain or wire rope capable of withstanding the loads shall be used in conjunction with any primary rigging (unless steering & braking are under control of operator on the towed equip)

  Safe

  At Risk

  N/A

• Dippers/buckets/loading booms/suspended loads shall not be swung over the operators' station of self-propelled mobile equip until the operator is out of the station and in a safe location

  Safe

  At Risk

  N/A

• Persons shall not work on top/under/in raised position on mobile equip until the equip has been blocked or mechancially secured to prevent it from rolling or falling accidentally

  Safe

  At Risk

  N/A

• Persons shall not work on top/under/from a raised component of mobile equip until the component has been blocked or mechanically secured to prevent accidental lowering or rolling

  Safe

  At Risk

  N/A

• A raised component must be secured to prevent accidental lowering when persons are working on or around mobile equip & are exposed to hazard of accidental lowering of the component

  Safe

  At Risk

  N/A

• Chains, ropes, and drive belts shall be guided mechanically onto moving pulleys/sprockets/drums except where equipment is designed specifically for hand feeding

  Safe

  At Risk

  N/A

• Welding operations shall be well-ventilated and shielded from arc flash

  Safe

  At Risk

  N/A

• Operator shall conduct pre-shift inspection prior to using mobile equipment; note any safety defects; report and record defects and if any hazards, take out of service

  Safe

  At Risk

  N/A

• Mobile equipment shall have functioning brakes and parking brakes

  Safe

  At Risk

  N/A

• Windows on equipment shall be safety glass and maintained to provide visibility for safe operation

  Safe

  At Risk

  N/A

• Equipment operator's station shall be free of mat'ls that could impair the safe operation of the equipment, and not modified in a manner that obscures visibility

  Safe

  At Risk

  N/A

• Tire repair: partially remove valve core for gradual deflation, and stand outside the trajectory; where possible, use wheel cage or other restraining device

  Safe

  At Risk

  N/A

• Only perform repairs/maintenance on machinery or equipment after power is off and equipment is blocked against hazardous motion

  Safe

  At Risk

  N/A

• Provide fork-lifts, loaders, and dozers with falling object protective structures capable of withstanding falling object loads

  Safe

  At Risk

  N/A

• Moving machine parts shall be guarded to protect persons from contacting gears, sprockets, chains, pulleys, flywheels, couplings, shafts, fan blades, and similar moving parts

  Safe

  At Risk

  N/A

• No guards are required where the exposed moving parts are at least 7' away from walking or working surfaces

  Safe

  At Risk

  N/A

• Overhead drive belts shall be guarded to contain the whipping action of a broken belt

  Safe

  At Risk

  N/A

• Equip unguarded conveyors next to travelways with emergency stop devices or with railings to prevent persons from falling on/against conveyor, that withstand vibration/shock/wear, and constructed/maintained to not create a hazard.

  Safe

  At Risk

  N/A

• Provide guards, shields, or other devices to protect persons from flying or falling materials from operations of screens/crushers/conveyors

  Safe

  At Risk

  N/A

• Guards shall be constructed/maintained to withstand vibration/shock/wear during normal operation, not create a hazard, be securely in place when operated (except when testing/adjusting)

  Safe

  At Risk

  N/A

• Backstops or brakes shall be installed on inclined conveyors to prevent the conveyor from running in reverse and creating a hazard to persons

  Safe

  At Risk

  N/A

• A manual master quick-close air valve shall be installed on all pneumatic-powered equipment; the valve shall be closed except when the equipment is being operated

  Safe

  At Risk

  N/A

• Stationary grinding machines shall be equipped with: peripheral hoods, adjustable tool rests not farther than 1/8" from the grinding surface, and a safety washer on each side of the wheel

  Safe

  At Risk

  N/A

• Hand held power tools (drills, sanders, grinders, etc.) shall have controls that require constant hand or finger pressure, and not be equipped with lock-on operating controls

  Safe

  At Risk

  N/A

PART 56N: PERSONAL PROTECTION

• Adequate first-aid materials, including stretchers and blankets, shall be provided at places convenient to all working areas; water or neutralizing agents shall be avail where chemicals are stored/handled/used

  Safe

  At Risk

  N/A

• All persons shall wear suitable hard hats when in or around a mine or plant

  Safe

  At Risk

  N/A

• All persons shall wear ANSI Class II Vests when in or around the mine.

  Safe

  At Risk

  N/A

• All persons shall wear suitable protective footwear when in or around a mine

  Safe

  At Risk

  N/A

• All persons shall wear safety glasses, goggles, or face shields when in or around a mine

  Safe

  At Risk

  N/A

• Safety belts and lines shall be worn when persons work where there is danger of falling; a second person shall tend the lifeline when bins/tanks/other dangerous areas are entered

  Safe

  At Risk

  N/A

• Special protective equip and clothing shall be provided & maintained in sanitary & reliable condition and used whenever chemical/environmental/radiological/mechanical irritants are encountered

  Safe

  At Risk

  N/A

• Protective clothing or equip and face shields or goggles shall be worn when welding, cutting, or working with molten metal

  Safe

  At Risk

  N/A

• Face shields or goggles in good condition shall be worn when operating a grinding wheel

  Safe

  At Risk

  N/A

• Life jackets or belts shall be worn where there is a danger from falling into water

  Safe

  At Risk

  N/A

PART 56O: MATERIALS STORAGE & HANDLING

• Supplies shall not be stacked or stored in a manner which creates tripping or fall-of-material hazards

  Safe

  At Risk

  N/A

• Equip bins, hoppers, silos, tanks, and surge piles with effective means to handle materials so that during normal operations persons are not required to enter or work where exposed to entrapment by caving or sliding of materials

  Safe

  At Risk

  N/A

• Equip bins, hoppers, silos, tanks, and surge piles with supply & discharge operating controls, located so spills/overruns will not endanger persons

  Safe

  At Risk

  N/A

• Provide suitable walkways or passageways where persons are required to move around or over bins, hoppers, silos, tanks, or surge piles.

  Safe

  At Risk

  N/A

• Where persons are required to enter bins, hoppers, silos, or tanks for maintenance or inspection purposes, ladders, platforms, or staging shall be provided. No person shall enter until supply & discharge have ceased and the equipment is locked out. Persons entering shall wear a safety belt or harness with liefline. A second person shall be statined near lifeline is fastened to constantly adjust it with minimum slack.

  Safe

  At Risk

  N/A

• Materials that can create hazards if accidentally liberated from their containers shall be stored in a manner that minimizes the dangers

  Safe

  At Risk

  N/A

• Containers holding hazardous materials must be of an approved type

  Safe

  At Risk

  N/A

• Compressed and liquid gas cylinders shall be secured in a safe manner

  Safe

  At Risk

  N/A

• Valves on compressed gas cylinders shall be protected by covers when being transported or stored, and by a safe location when the cylinders are in use

  Safe

  At Risk

  N/A

• Taglines shall be attached to loads that may require steadying or guidance while suspended; hitches & slings used to hoist materials shall be suitable for the particular material handled

  Safe

  At Risk

  N/A

• Persons shall stay clear of suspended loads

  Safe

  At Risk

  N/A

• Material shall not be dropped from an overhead elevation until the drop area is first cleared of personnel and the area is either guarded or suitable warning is given

  Safe

  At Risk

  N/A

• Persons shall not ride on loads being moved by cranes or derricks, nor shall they ride the hoisting hooks

  Safe

  At Risk

  N/A

• Chemical substances shall be stored to prevent inadvertent contact with each other or with other substances, where such contact could cause a violent reaction or release of harmful fumes/gases

  Safe

  At Risk

  N/A

• Forklifts shall be operated with the: a) uplift titled back to steady and secure the load, b) load in upgrade position when on a >10% uphill or downhill grade, c) load not raised/lowered except minor adjustments, d) load engaging device downgrade when traveling unloaded on all grades

  Safe

  At Risk

  N/A

PART 56P: ILLUMINATION

• Illumination sufficient to provide safe working conditions shall be provided in and on all surface structures, paths, walkways, stairways, switch panels, loading and dumping sites, and work areas

  Safe

  At Risk

  N/A

PART 56Q: SAFETY PROGRAMS

• A competent person designated by operator shall examine each working place at least once each shift for unsafe or hazardous conditions; operator shall promply initiate action to correct such conditions

  Safe

  At Risk

  N/A

• A record that such exams were conducted shall be kept by the operator for one year and made available for review by MSHA

  Safe

  At Risk

  N/A

• Conditions that may present imminent danger shall be brought to the immediate attention of the operator who shall withdraw all persons from the area affected until the danger is abated

  Safe

  At Risk

  N/A

• New employees shall be indoctrinated in safety rules and safe work procedures

  Safe

  At Risk

  N/A

• When persons are working at a mine, a competent person designated by the mine operator shall be in attendance to take charge in case of an emergency

  Safe

  At Risk

  N/A

• An individual capable of providing first aid shall be available on all shifts; first aid training shall be made available to all interested miners

  Safe

  At Risk

  N/A

• Emergency phone numbers shall be posted at appropriate telephones

  Safe

  At Risk

  N/A

• A suitable communication system shall be provided at the mine to obtain assistance in the event of an emergency

  Safe

  At Risk

  N/A

• Arrangements shall be made in advance for obtaining emergency medical assistance and transportation for injured persons

  Safe

  At Risk

  N/A

• No employee shall be assigned/allowed/required to perform work alone in an area where hazardous conditions exist unless he can communicate with others, can be heard, or can be seen

  Safe

  At Risk

  N/A

PART 56S: MISCELLANEOUS

• Intoxicating beverages and narcotics shall not be permitted or used in or around mines; persons under the influence of alcohol or narcotics shall not be permitted on the job

  Safe

  At Risk

  N/A

• Adequate supply of potable water shall be provided at all active working areas; no common drinking cup or dipping container; ice shall be potable; potable water outlets shall be labeled and prevent backflow

  Safe

  At Risk

  N/A

• All workplaces, passageways, storerooms and service rooms shall be kept clean and orderly

  Safe

  At Risk

  N/A

• The floor of every workplace shall be maintained in a clean and dry condition; where wet ops are conducted, drainage shall be maintained and platforms/mats/false floors/dry standing places provided where practicable

  Safe

  At Risk

  N/A

• Every floor, working place, and passageway shall be kept free from protruding nails, splinters, holes, or loose boards, as practicable

  Safe

  At Risk

  N/A

• Carbon tetrachloride shall not be used

  Safe

  At Risk

  N/A

• Toilet facilities shall be provided at locations that are compatible with the mine operations and that are readily accessible to mine personnel; facilites kept clean & sanitary, sex-segregated except one-stall lockable from the inside

  Safe

  At Risk

  N/A

• Areas where safety or health hazards are not immediately obvious shall be barricaded or warning signs shall be posted at all approaches; warning signs shall be readily visible, legible, and display the nature of the hazard and any protective action required

  Safe

  At Risk

  N/A

• Receptacles with covers shall be provided at suitable locations and used for the disposal of waste food & associated materials; shall be emptied frequently & maintained in clean and sanitary condition

  Safe

  At Risk

  N/A

• No person shall be allowed to consume or store food or beverages in a toilet room or in any area exposed to a toxic material

  Safe

  At Risk

  N/A