Information
-
Company Name
-
Audit Title
-
Conducted on
-
Prepared by
-
MOT class tested
Observed test
-
Nominated Tester's Name
6.1 Pre Test and Inside Vehicle
-
a. Acceptance Check
-
b. VIN and VRM obtained from vehicle
-
c. Brake pedal & servo operation
-
d. Steering wheel & column
-
e. Steering lock operation checked
-
f. Drivers seat adjustment checked
-
g. Rock steering (solid surface) to assess play
-
h. Operation/security switches
-
Horn
-
Fog/hazards/light switches
-
Warning lamps/speedometer
-
i. Handbrake security and operation
-
j. Seat and seat-belts operation and security
-
NSF
-
OSF
-
NSR
-
OSR
-
Centre
6.2 Outside Vehicle
-
a. Operation of all front lights
-
b. Check headlamp alignment
-
c. Operation of all rear lights
-
d. Self levelling and headlamp cleaning device (if HID)
-
e. Obligatory mirrors
-
f. Windscreen, wipers
-
g. Registration plates
-
h. Fuel cap and seal
-
i. Boot hatch opened and items inspected
6.3 Under Bonnet
-
a. Bonnet security and fixings
-
b. Battery security
-
c. Brake components checked - use of assistant or pressurisation device
-
d. Steering/suspension components checked - use of assistant or shaker plates
-
e. Fuel lines (with engine running and without)
6.4 Under Vehicle
-
a. Rock steering - use of assistant or shaker plates
-
b. Check brake hydraulic pipe hoses - checked - use of assistant or pressurisation device
-
c. Exhaust system
-
d. Fuel lines (with engine running and without)
-
e. Examine front wheels, tyres, steering and suspension components
-
OSF
-
NSF
-
Repeated with assistant whilst NT observes (if required)
-
f. Examine rear wheels, tyres, steering and suspension components
-
OSR
-
NSR
-
g. Wheel Bearings
-
Front
-
Rear
-
h. Lever/bar used under front wheels (if appropriate for suspension type) (not mandatory for OPTL/ATL)
-
Repeated with assistant whilst NT observes (if required)
-
i. Steering lock to lock (turnplates) checking operation
-
j. Steering lock to lock (turnplates) checking for fouling on full lock
-
k. Vigorous rock of suspension (OPTL/ATL shaker plates used)
-
OSF
-
NSF
-
Repeated with assistant whilst NT observes (if required)
-
l. Examine vehicle structure and prescribed areas for corrosion - appropriate methods used
6.5 Emission Test
-
a. Pre-checks conducted
-
b. Engine oil temperature measured (if required for type of test)
-
c. Engine purged (diesels)
-
d. Metered emission assessment conducted
-
e. Visual assessment
6.6 Brake Test
-
a. Align vehicle in rollers
-
b. Front brakes effort, balance, increase, reduction and judder assessed
-
c. Rear brakes effort, balance, increase, reduction and judder assessed
-
d. Handbrake effort
-
e. Readings recorded and entered correctly
6.7 Use of MOT Computer
-
a. Does the NT demonstrate adequate competence in the using the MOT computer
-
b. Was the information logged on to the computer correct
6.8 Further actions required for NT and AE (if advice given or shortcomings noted)
-
Was a recommendation made for the NT to revise items in Inspection Manual and for recheck to be made during internal NT checks
